Ure Museum Database



Browse
There are 175 objects for which Shape_description contains → lip
13.10.12 Body almost cylindrical, pointed at bottom. Short neck, trefoil lip, handle that joins the shoulder an the lip.
13.10.17 Barrel-shaped jug, deep-spreading lip, half has broken away. One handle, with a raised area along the middle. Clay on body rounded into a point in the middle of either side.
13.10.8 Shallow but wide mortar with small lip and rim. Very thick body gradually leading to a small concave foot.
13.10.9 Slightly tapered body, straight neck, elongated lip.
14.9.2 Fat body, long bottle neck with spreading lip, large U-shaped handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.418 (with shorter foot and more relief decoration)
14.9.58 Conical with narrower neck at one end and widening to a lip at the other like a miniature vase. End with lip slopes inwards to a raised central circle.
14.9.6 Tankard (?) or one-handled jug (?) fragment, preserving section of lip, neck and upper body.
2006.8.4.86 Fragment; Small lip on one edge.
2007.2.131 Fragment, lip on one edge, potentially the base of a vase.
2007.2.132 Fragment with a small lip, potentially the neck of a vessel.
2007.2.138 Fragment with lip.
2007.2.141 Fragment with lip.
2007.4.216 Pouring lip of a pot, complete with rim from the top of the pot. There are holes in the pot where the liquid would come out
2008.7.54 Hexagonal fragment from possibly neck of a pot as the exterior top of the fragment curves out into what could be a lip; exterior base of fragment also begins to curve outwards; horizontal curvature to the fragment
2008.7.75 Quadrangular fragment with lip still attached
2008.7.88 Pentagonal fragment with small lip.
2016.5.1 Projecting disc-shaped rim with rounded lip from which emerges a short tubular neck which curves into a globular body with a flat bottom. A narrow strap handle curves to the shoulder. The bottom of the vase has a small flat recess in the centre.
23.11.10 Flat base, bulbous lower body to which are attached two horizontal strap handles, which rise slightly; flaring upper body and plain, rounded lip.
23.11.38 Miniature cup with broad lip and narrow opening; no handles
23.11.39 Miniature cup with broad lip, narrow opening, and no handles
26.12.13 Trefoil lip from which a handle curves down to the top of the bulbous body. Deep groove separates body from wide foot. Resting surface slightly concave.
26.12.14 Trefoil lip. Strap handle curves down from rim to shoulder. Bulbous body. Resting surface slightly concave
26.12.26 Trefoil lip oinochoe with a banded handle that bears a ribbed back. The body is ovaloid and the foot is conical with a round base.
26.12.33 Slightly incurving lip, with a carination just below the rim, narrowing with convex sides to a flat base, with convex sides just above base. Wire cutting marks in circular design on base. On the interior, the centre of the bowl rises up slightly.
26.12.7 Stemmed. The vessel is slanted to one side, which suggests that the base is not flat or that the body has not been made to rest flat on top of the foot. The wide rim has a flat lip. The base hollow to where the bottom of the bowl rests.
27.4.1 Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot.
27.4.4 Trefoil lip
29.11.6 Two u-shaped horizontal handles placed slightly above the lip, slightly angled upwards. Deep body descending to a groove above the ring base.
29.11.8 Flaring, slightly convex rim with rounded lip, smoothly joins a short, straight-sided cup that curves sharply to a slightly offset resting surface, slightly concave. A single strap handle curves arches between the walls of the basket on the inside.
34.10.7 Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim.
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body.
34.8.15B Squat neck with lip, round in body, round bottom (sits on stand 34.8.15A).
34.8.4 Flared mouth with flat lip. Base is flat with concave central circle.
34.8.6 Flared mouth with slightly curving lip.
35.4.4 Trefoil lip oinochoe, with a handle of ellipsoid cross-section that is raised higher than the lip. The body is spherical and the short foot is conical. Gill's shape 5c.
37.11.7 Flaring mouth and wide neck separated from body by a moulded groove. Single curved handle starting at groove and bending to lip. Small foot, base slightly concave.
39.8.1 Stemless cup-skyphos with an offset lip terminating in a rounded everted rim; moulded foot comprised of concave element above convex element, interrupted by a ridge at the top.
45.6.17 Flared mouth with flat lip. Handle starts halfway down neck, curves up and then down to join shoulder. Long, narrow body. Broad foot. Central concave section on base.
45.6.18 Flared mouth with flat on the top rim. Single strap handle curves from top of shoulder down to top of body. Small torus flat base, divided from the body with a groove. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p40, lip type j
45.6.38 Stemmed. The bowl is shallow with a flat lip.
45.6.66 Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences.
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle.
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
48.12.5 Vertical strap handle curves up from rim and joins shoulder, rising slightly over the rim; trefoil lip; long cylindrical neck; half-sphere body; flat base
48.12.9 Projecting rounded rim with a lip that is flat on the upper surface; ribbed vertical strap handle extending 1/3 down the length of the vessel; slender neck widening to a cucumber shaped body. Flat concave base, the underside of which is outlined with a groove.
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body.
49.8.10 Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
49.8.6 Trefoil lipped; thin neck; thick strap handle curves down from back of lip to lower body; half-sphere shaped body; flat base.
49.8.8 Trefoil lip; large handle with high sides making central channel curves up from rim, then down to top of body; bulbous body; small, flat base with central sunken disk
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side.
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside.
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior).
50.4.20 Outward facing lip on a rim folded into a grape leaf shape, shape continues down neck. Neck joins a plain convex shoulder. Tapering lower body joining slightly taurus foot with slightly concave base. Curved vertical handle attached to the lip and the shoulder
50.4.8 Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder.
50.5.3 Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot. Base convex underneath.
51.1.1 Flat outturned rim with rounded lip, sharply curving to nearly cylindrical bowl, slightly concave, which broadens and then tapers in the convex lower part to a disk foot, sloping on the upper part, rounded on the lower part, tapered on the interior, with flat resting surface and nearly flat underside. Just below the rim on one side are two holes for suspension.
51.1.4 Slightly everted lip with rounded rim, on a deep plate that is convex at the upper part and then curves, with a near carination to become concave in the lower part, on a flat base that is beveled on the outer part. A single suspension hole is on the lip.
51.4.11 Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join.
51.7.15 A small mouth, with flaring lip, on a short concave stem, is joined smoothly to a ring aryballos, rectangular in section, approximating a sharp-edged donut, with beveled edges on the inside. A short strap handle rises slightly from the rim and curves smoothly to adhere to the exterior surface of the aryballos. Ure 57: 'Rectangular in section, as is normal in Boeotia'; cf. P.N. Ure, Hesperia 15 (1946) 45-50. Small mouth and handle. Angular shape with side and edge flat
51.7.3 Flaring lip with rounded rim, sharply joined to ovoid body; single round, curved vertical handle rises up from alongside the lip and rejoins at the shoulder; lower part of body sharply joins to a short, flaring foot, concave on the underside, with a pointed underside.
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side).
53.8.1 Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around.
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
54.2.2 Everted lip; thin, tapering neck; strap handle curves down from rim to spherical, bulbous body; slightly raised flat foot.
56.8.2 Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug.
56.8.8 The body is conical, widening towards the top. The rim has horizontal sides and a small lip at the top. The band handles are almost ellipsoid, with peaked terminations. Ribbon handles. The base is in the shape of an inverted echinus (a conical stand?).
57.3.3 Fragment of lip of small vase
57.3.6 Fragment of lip of deep cup.
58.2.4 Wide rim with bevelled lip. Long wide neck leading to a short and rounded body, base protrudes from body but has been damaged (during firing process ?). The handle attaches to the top of the body and then again at the join of the rim and the neck. There is a fork shaped spur which follows the curve of the handle and rim and then continues above the main body of the jug.
59.6.1 Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix.
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section.
61.6.1.4 Very uneven in shape. Surface left very rough. The lip is uneven, leading into a very open interior which is widest at the mouth. The body is rough, while the base is also roughly made with no smooth finish to the edges.
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim.
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim.
62.10.1 Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim.
70.3.1 Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p51 shape class M (see also 'Comments') - although lip is slightly more protrusive than the type indicates as its norm.
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
85.3.2 Wide, concave rim; short strap handle from bottom of lip to shoulder; thin short neck curves uninterrupted into bulbous body; slightly concave underside.
91.11.1 Tall bottle with wide flanged lip; very long and narrow neck; stout conical shaped body with flat resting surface and slightly concave base.
E.2002.8.1 Pronounced thick lip, no neck, bulbous body tapering to a pointed base.
E.23.19 Tall pointed jar with flattened, narrow base. Wide mouth with narrow lip and wide neck. Lugs at either side, perforated with thread holes.
E.23.21 Rounded base and pronounced lip
E.23.23 Pear shaped jar with a pronounced lip, short neck, and pointed base, widest point has a ridge which is uneven.
E.23.24 Squat jar with rounded everted lip, short neck, and rounded base.
E.23.25 Slightly everted lip, wide neck, bulbous body, and everted pedestal foot with concave base.
E.23.26 Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body.
E.23.27 Broad shouldered jar with thin lip, broad neck, and body that tapers down to a conoidic foot which is slightly raised from the rest of the body.
E.23.28 Everted lip, carinated body, and pointed foot.
E.23.31 Pronounced lip, short neck, rotund body which tapers to a flat base.
E.23.32 Undulating lip, long neck, bulbous shoulder tapering to a pointed base. Two opposing handles emerge on the sholder just below the band decoration.
E.23.33 Lip is unpronounced, long neck flares to shoulder/widest point, which then tapers to pointed foot. The rough handles are directly opposite each other on the widest point.
E.62.25 Long-necked vase, with fluted mouth and pronounced lip. Rounded body and base.
E.62.30 Small vase, with pronounced lip and neck. Shoulders are widest point tapering to a flat base.
E.62.34 Part of jug and basin set (basin missing). Flat base, wide shoulders, tall neck (ca. 6 cm), with striated lip and wide mouth.
E.62.47 This could be part of a pot as the top of the fragment appears to form a lip and the fragment ins curved.
E.62.56 Poppy flask, with a fat body, long bottle neck with spreading lip, large handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.412, from Abydos (Base-ring I Ware)
E.62.61 Small vase, probably for make-up purposes. Pronounced flat lip, no neck, flaring to a flat base.
E.63.23 Thin lip, narrow neck, curved shoulders and pointed base.
E.63.24 Wide necked jar with a large lip and a small neck.
E.63.27 A small lip tapering to a narrow mouth. The neck is long leading straight down to globular body the widest point of which is the shoulder. The body tapers to a flat base.
E.63.28 The lip is narrow, no neck and a weak shoulder. The body flares to the widest point in the lower half of the jar just above the foot. The widest point tapers to the foot, which is approximately 1cm in height with a flat base.
E.65.1 Wide flaring lip with rounded rim, narrowing to a short neck, broadening to an ovoid body, with a pointed base.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1926.99.50 Flaring broad lip, quite short, above a short neck which curves into a globular body, round bottomed.
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip.
REDMG:1926.99.59 Flaring rim , with flat lip, narrowing to a nearly cylindrical body (slightly concave) that tapers sharply at the base, to a low conical foot with concave underside. No lid.
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside.
REDMG:1934.53.4 Broad flaring lip, convex on the upper surface, with a downturned rim, offset from a concave shallow bowl; hollow high stem offset from plate but spreading at the bottom into a disk foot, hollowed on the interior.
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside.
REDMG:1935.87.20 Trefoil lip oinochoe with lid; shallow sloping shoulder and wide body with wide base; curved handle.
REDMG:1935.87.21 Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre.
REDMG:1935.87.5 "Little lion." Lip askew; concave base.
REDMG:1942.5.6.1 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder.
REDMG:1951.130.1 Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface.
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim.
REDMG:1951.139.1 Moulded knob, topped by a slightly rounded element with inset circle and conical indentation, on upper surface; lower part of knob curves into a nearly cylindrical stem offset from a diagonal lid, with a tapered lip, with a plain rim.
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder.
REDMG:1951.141 Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
REDMG:1951.144.1 Central well, surrounded by a ridge, rising to broad rim with overhanging vertical lip, tapering slightly in; on the underside the plate curves to a short, thick stem that broadens to a moulded foot, concave and flaring on the exterior surface, hollowed on the interior, with a flat resting surface, pointed at centre of plate.
REDMG:1951.148 Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot.
REDMG:1951.150.1 Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders.
REDMG:1951.152 Moulded grooved rim, with a flat overhanging lip, atop a thin, nearly cylindrical neck, attached to an ovoid body, ridged at the top; raised base, with thin reseting surface and slightly pointed underside.
REDMG:1951.154 Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom.
REDMG:1951.155 Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base.
REDMG:1951.156.1 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem.
REDMG:1951.161.1 Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body.
REDMG:1951.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1951.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior.
REDMG:1951.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior.
REDMG:1951.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior.
REDMG:1951.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior.
REDMG:1953.25.13 Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.20 Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
REDMG:1953.25.22 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre.
REDMG:1953.25.26 Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside.
REDMG:1953.25.33 Central well, surrounded by a ridge and groove; walls rising to broad rim, just beyond a groove on the upper surface, with overhanging vertical lip, tapering slightly out; on the underside the plate is slightly convex and joins a short, thick, angled ring foot, with a tapering resting surface and a slightly convex, pointed underside.
REDMG:1953.25.34 The vessel presents a rounded belly with a very narrow neck, which ends in a flat rim with a inner lip that would prevent the liquid from falling.
REDMG:1953.25.36 Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
REDMG:1953.25.43 Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.48 Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.49 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
REDMG:1953.25.50 Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.52 Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside.
REDMG:1953.25.53 Incurving rim with concave lip, narrowing to a short neck at the top of which is attached a small vertical strap handle that extends the the shoulder; wall curves continuously from neck, widening to an ovoid body atop a disk foot; underside concave with a slight circular protruberance at centre. Tapering 'cucumber', survival of the Late Corinthian Archaic type (see Corinth 13, 140-41, fig. 15), but with a disk foot. E.g. Corinth T1317: Corinth 13, 222 no. 277-4, pl. 37. Cf. also Rhitsona 50.273.
REDMG:1953.25.57 Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
REDMG:1953.25.59 Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.60 Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
REDMG:1953.25.65 Flaring broad lip with flat upper surface and a short rim curving into a cylindrical neck above a moulded ring, from which descends the conical body, narrowing slightly to a flat base, with a slightly bevelled edge.
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem.
REDMG:1961.150.1 Spreading lip, flat, with rounded rim, above tall, cylindrical neck, with ridge at center, just above attachment of l-shaped strap-handle, joining at centre of shoulder; squat piriform body, nearly flat base, ridge at exterior, groove just within.
REDMG:1961.150.3 Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided.
REDMG:1964.1606 Small circular body with wick hole almost in the shoulder, just protruding slightly to form a lip. Large circular filling hole, small oval wick hole. raised circular foot with rough edge. At the bottom of the reservoir is a lump, probably from the patrix ?
REDMG:1964.1607.1 Very small almost circular body, convex shoulder with large circular filling hole. Nozzle affects the circular shape of the body, almost forming a lip to the lamp, oval wick hole is pierced though lip and shoulder. Large circular foot, base is unturned and has wire cutting marks. Small kick in the base of the interior.
REDMG:1964.1620 Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled.
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41.
REDMG:1964.1624 Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base.
REDMG:1964.1625 Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside.
REDMG:1964.1648 Projecting rim, with rounded lip and with slightly concave mouth, from which emerges a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap handle that curves down to the middle of the shoulder; globular body with a flat bottom.
REDMG:1964.1674 Flat rim on everted lip, slightly concave on the interior; nearly straight sides which taper sharply to a flat base; (lug) handles.
REDMG:1964.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1964.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior.
REDMG:1964.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior.
REDMG:1964.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior.
REDMG:1964.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior.
REDMG:1998.153.4 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks.
REDMG:2004.95.1 Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside.
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem.
TEMP.2014.9.19 Bowl with a wide lip
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH