| 13.10.24
|
Cylindrical alabastron, with rounded base, tapering at both ends, more sharply to the mouth; the shape, dimensions, and proportions are comparable to that of Ure 13.10.23, which is, however, complete.
|
|
| 14.9.39
|
Fragment with rim attached which is sharply offset.
|
|
| 14.9.44
|
Fragment with part of a sharply offset rim attached.
|
|
| 2008.7.3
|
Rectangular fragment thicker at one end and curved sharply at the other. Possibly a handle fragment.
|
|
| 22.3.40
|
Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base.
Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia')
|
|
| 22.3.7
|
Stemless. Inside, deep concave rim, sharply marked off although the outside is an unbroken curve and does not follow contours of the inside. Groove separates the body from the short foot.
|
|
| 23.11.7
|
Flat base; rounded lower body to which are attached two small triangular handles, circular in cross-section, which rise slightly; sharply curved join to upper body, which flares broadly to a plain, rounded rim.
|
|
| 27.4.1
|
Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot.
|
|
| 27.4.5
|
Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence.
|
|
| 29.11.8
|
Flaring, slightly convex rim with rounded lip, smoothly joins a short, straight-sided cup that curves sharply to a slightly offset resting surface, slightly concave. A single strap handle curves arches between the walls of the basket on the inside.
|
|
| 45.10.1
|
High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
|
|
| 45.6.5
|
Single ribbon handle with projecting side pieces. The upper part of body rises sharply at rim.
|
|
| 47.10.3A-B
|
Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis.
Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle.
|
|
| 47.2.12
|
Rounded, slightly incurved rim; shallow convex upper wall divided by a reserved groove from a sharply concave wall that runs continuously down to the foot, although only a single curve is perceived on the interior. Short torus ring foot, with a narrow reserved resting surface and a reserved medallion at the centre of the underside, circumscribed by a concentric ridge. Convex-concave profile.
|
|
| 47.2.21
|
Bell, with a rounded lower edge, narrowing sharply and then tapering slowly to a rounded shoulder, where it is attached to a round knob, hollowed on one side, thickened on the other, pierced with a hole; there is another hole in the top of the bell, just below the hollowed part of the knob. A hand-modeled striking ball is attached, with a thin piece of jute string, knotted through the top hole and lowered through the bottom hole.
|
|
| 47.2.6
|
Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot.
|
|
| 47.2.7
|
Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside.
|
|
| 48.12.7
|
Flaring neck; upper part of body slopes sharply out to junction with bottom of single curved vertical circular handle. Widest part of body is towards base making a 'squat' shape. Flat base.
|
|
| 49.1.1
|
Inturned rim with straight sides; ribbon handle; shoulder slopes down to vertical wall, then sharply recedes to vertical footring and sloping underside of the base.
|
|
| 49.12.1
|
Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body.
|
|
| 50.4.5
|
Type 7a. Cut-away neck, with a vertical strap handle attached to the lowest part, rejoining the body at the bottom of the shoulder; cylindrical neck sharply joining sloping shoulder, which curves into the ovoid upper body, tapering into a cylindrical lower body; raised base; reserved on the interior, underside and resting surface.
|
|
| 50.4.9
|
Trefoil lipped; rounded handle curves up from the rim to the upper part of the body; short neck curves sharply into shoulder and bulbous body; small footring; flat underside.
|
|
| 50.5.5
|
Large krater with wide, downturned rim that extends sharply from the top of the body; two upcurving handles high on the body, which narrows to a short, cylindrical stem; hollowed pedestal foot, ridged just below the top of the foot. The resting surface is concave and the underside undulates smoothly up to the bottom of the bowl.
|
|
| 51.1.1
|
Flat outturned rim with rounded lip, sharply curving to nearly cylindrical bowl, slightly concave, which broadens and then tapers in the convex lower part to a disk foot, sloping on the upper part, rounded on the lower part, tapered on the interior, with flat resting surface and nearly flat underside. Just below the rim on one side are two holes for suspension.
|
|
| 51.7.11
|
A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot.
|
|
| 51.7.12
|
Offset rim; origionally two handles of which only one remains, protruding horizontally from just below the rim; body initially rounded but then tapers fairly sharply to very narrow, raised footring; base flat
|
|
| 51.7.2
|
Lid: slightly convex top with circular groove (1.9 cm diam.) at the centre, overhanging a cylindrical body, with straight sides, terminating in a rounded rim at bottom. Pyxis: high cylindrical body with straight sides and simple rounded rim sits atop a flanged element, with rounded edges, that slopes sharply to a foot ring with tapered interior edge and rounded resting surface.
|
|
| 51.7.3
|
Flaring lip with rounded rim, sharply joined to ovoid body; single round, curved vertical handle rises up from alongside the lip and rejoins at the shoulder; lower part of body sharply joins to a short, flaring foot, concave on the underside, with a pointed underside.
|
|
| 51.7.5
|
Bell mouth, flaring at the rim, with a convex upper surface, offset from a narrow neck, broadening and curving sharply into the ovoid body; strap handle rises from the top of the neck and joins the lower part of the shoulder; molded ring base, divded into two concave parts, divied by a ridge at the middle; convex underside.
|
|
| 52.3.4
|
Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side).
|
|
| 53.8.3
|
Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
|
|
| 56.8.2
|
Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug.
|
|
| 56.8.3
|
Deep body tapers sharply towards foot; circular handles curve slightly upwards without reaching the height of the rim; conical footring.
|
|
| 56.8.6
|
Rounded cup with sharply incurving rim and shallow bowl, on a short hollow stem which broadens to a disk foot with a grooved foot, and deeply concave underside.
|
|
| 59.6.1
|
Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix.
|
|
| 62.5.1
|
FS (='Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round handle, slightly concave sides that taper sharply below the handle to a raised base that is slightly concave on the underside.
|
|
| 70.3.3
|
Ian McPhee describes it as a Kotyle rather than Skyphos type c (?). Tapering ring base, rounded at the bottom, from which the body rises in a sharp diagonal, curving sharply approximately at the halfway point, from which it rises near vertically and eventually flares slightly to a plain, rounded rim, just below which are attached two horse-shoe shaped handles, almost round in cross section.
|
|
| 80.7.1
|
Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
|
|
| 85.3.1
|
High, vertical sided neck joins sharply at shoulder with bulbous body; two-stepped base, bottom step rounded; concave base.
|
|
| REDMG:1926.99.54
|
Chimney mouth (missing), offset slightly from a tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle arches up from just below the mouth and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is slightly convex; the slightly concave underside has a conical indentation at centre.
|
|
| REDMG:1926.99.59
|
Flaring rim , with flat lip, narrowing to a nearly cylindrical body (slightly concave) that tapers sharply at the base, to a low conical foot with concave underside. No lid.
|
|
| REDMG:1934.26.1
|
Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside.
|
|
| REDMG:1935.87.1
|
Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside.
|
|
| REDMG:1935.87.6
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
|
|
| REDMG:1950.25.1
|
Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim.
|
|
| REDMG:1951.135.1-2
|
Pyxis: Flanged rim widening to sharply curved shoulder, rounded below, and tapering to a flat base; round horizontal handles on either side pressed up against rim to form lugs. Lid: cylindrical knob attached to a disk.
|
|
| REDMG:1951.140.1
|
Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder.
|
|
| REDMG:1951.141
|
Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
|
|
| REDMG:1951.147.1
|
Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
|
|
| REDMG:1951.148
|
Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot.
|
|
| REDMG:1951.150.1
|
Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders.
|
|
| REDMG:1951.156.1
|
Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem.
|
|
| REDMG:1951.161.1
|
Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body.
|
|
| REDMG:1953.25.22
|
Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre.
|
|
| REDMG:1953.25.23
|
Chimney mouth (missing), offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is concave above convex; the flat base has a conical indentation at centre.
|
|
| REDMG:1953.25.29
|
Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving sharply into a short stem, attached to a small pedestal foot, tapering down, with a slightly raised base; small nipple at the centre of the underside.
|
|
| REDMG:1953.25.30
|
White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
|
|
| REDMG:1953.25.36
|
Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
|
|
| REDMG:1953.25.4
|
Plain rim, below which are attached two horizontal round handles; curved sides, nearly vertical at the top and tapering more sharply towards the angled ring foot. Shape corresponds to Corinth black-glazed skyphoi, group iii, although the pattern on this skyphos is quite different.
|
|
| REDMG:1953.25.40
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface.
|
|
| REDMG:1953.25.41
|
Flanged rim and tapering body, to which are attached horizontal triangular strap handles, slightly canted upwards. The body narrows sharply to short stem, slightly offset from the top of a moulded foot, with a vertical exterior surface and a conical indentation on the underside, and a narrow resting surface.
|
|
| REDMG:1953.25.44
|
Flaring rim, with concave profile, joining bulging body at a carination, below which are attached two u-shaped horizontal handles, rounded in section, canted slightly up; below handles body curves sharply towards stem, broken off.
|
|
| REDMG:1953.25.48
|
Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.49
|
Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
|
|
| REDMG:1953.25.50
|
Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.52
|
Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside.
|
|
| REDMG:1953.25.55
|
Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted).
|
|
| REDMG:1953.25.59
|
Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.60
|
Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
|
|
| REDMG:1953.25.66
|
Two thin vertical strap handles arch up from the top of a cylindrical neck, slightly offset at the bottom, and rejoin at the middle of a sloping shoulder; shoulder curves sharply into a conical body, slightly rounded at the bottom where it joins a short stem flaring to a disk foot, hollowed at the bottom.
|
|
| REDMG:1953.25.9
|
Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
|
|
| REDMG:1958.112.1
|
Cup mouth with flat rim, tall cylindrical neck, slightly widening at the top, curving into a diagonal shoulder, below which (from a carination) the body tapers slightly, and then curves sharply to join a tall moulded base, with straight sides, slightly concave on the underside, with a cylindrical depression; a vertical strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination.
|
|
| REDMG:1962.184.33.21
|
Cup mouth on cylindrical neck, slightly narrowing and then curving to a slightly diagonal shoulder; narrow strap handle extends from the middle of the neck to the bottom of the shoulder, just above a carination, from which descends the nearly straight side walls; body narrow sharply at the bottom to a short stem attached to a tall moulded base, which tapers down.
|
|
| REDMG:1964.1154.1
|
Outturned rounded rim , narrowing to a nearly cylindrical body (broadens slightly below) that narrows sharply to a short, nearly cylindrical stem, attached to a pedestal foot, hollow within, slightly angled on the upper surface, nearly vertical on the sides, flaring to a slighted everted base, with a rounded resting surface
|
|
| REDMG:1964.1620
|
Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled.
|
|
| REDMG:1964.1660
|
Thick rounded rim, slightly overhanging, above a baggy bowl that narrows sharply to a tapering, slightly concave pedestal foot, with a flat base. The interior of the bowl is concave at the centre. Some irregularities such as uneven edge of base.
|
|
| REDMG:1964.1674
|
Flat rim on everted lip, slightly concave on the interior; nearly straight sides which taper sharply to a flat base; (lug) handles.
|
|
| REDMG:1964.1676
|
Everted rim, slightly concave on the interior, concave walls broadening to a carination from which the sides taper sharply to a flat base.
|
|
| REDMG:1964.1697.1
|
Fat body that tapers gradually and then sharply towards the foot. Very heavy, dense material. Body is widest at shoulder and thinnest at base.
|
|
| REDMG:1998.153.4
|
Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks.
|
|