| 2016.3.1
|
Round body, convex shoulders and concave discus with a regular → filling ← hole, roughly at the lower end of the discus; short round nozzle, leadin |
|
| 2016.3.2
|
Ovoid body with convex shoulders and wide central → filling ← hole. Body tapers directly into the nozzle with rounded tip, ovoid wick |
|
| 26.7.8
|
lower part. Projected rim with a very small discus area leading to an irregular → filling ← hole. Long nozzle with a wide, flat, oval wick hole. Applied strip handl |
|
| 34.8.11
|
Rounded, deep fat body with a small down turning discus and a large → filling ← hole in the centre, small 'kick' at the bottom of the reservoir. Straigh |
|
| 45.6.66
|
Circular deep body with small lip leading to a large → filling ← hole. At the centre of the reservoir is a central circular hollow which |
|
| 45.6.67
|
ounded body with a small amount of discus which inverts into the reservoir. The → filling ← hole is large and circular. The nozzle is long and is slightly upturned |
|
| 45.6.68
|
ulder and reservoir meeting at the widest point to form an angular girth. Large → filling ← hole in the center of the body, encircled by a small depression of the d |
|
| 45.6.69
|
stricted lateral ellipsoid body, long convex shoulder shallow lower body. Large → filling ← hole in the center of the body. Beginnings of a flat nozzle with concave |
|
| 45.6.70
|
Circular shallow body with flat shoulder and a concave discus with small → filling ← hole towards the right edge of the discus. Body shallower at the front e |
|
| 45.6.71
|
dest part. Slightly convex shoulder and a concave discus with a small irregular → filling ← hole roughly in the centre. Short nozzle with a rounded tip and circular |
|
| 50.4.24
|
Shallow circular body with convex shoulder and a small concave discus; small → filling ← hole at centre. Nozzle is short and has a flat surface at the tip into w |
|
| 50.4.25
|
Circular body, concave discus with a circular → filling ← hole to the frontal left hand side. Flat nozzle with concave sides and s |
|
| 78.12.10
|
Circular body, flat moulded shoulder, small concave discus with a small → filling ← in the front right hand side of the discus. Short flat nozzle, rounded t |
|
| 78.12.11
|
cular body, flat moulded shoulder, small concave discus with a small off center → filling ← hole. Short flat nozzle, rounded tip with a slightly irregular wick hole |
|
| 78.12.12
|
Shallow circular body with large concave discus, → filling ← hole is small and off centre on the discus. Medium nozzle has concave si |
|
| 78.12.13
|
Deep circular body , concave discus with a central → filling ← hole. Medium, flat nozzle with concave sides, a splayed, rounded tip, la |
|
| 78.12.14
|
Circular body with a gradual concave discus with a → filling ← hole in the centre. Flat medium nozzle with concave sides and a rounded |
|
| 78.12.15
|
Circular shallow body , small shoulder, concave discus with a small → filling ← hole in the centre. Medium flat nozzle with concave sides and a rounded |
|
| 78.12.16
|
Deep circular body with a rounded shoulder terminating in a large → filling ← hole. Long rounded nozzle titling slightly upwards, irregular rounded ti |
|
| 78.12.20
|
Circular body, concave discus with a mall circular → filling ← hole in the front, right portion of the discus. Long flat nozzle, rounde |
|
| 78.12.21
|
Shallow circular body , small convex shoulder, concave discus with a small → filling ← hole in the centre. Flat nozzle with concave sides, rounded tip and circ |
|
| 78.12.22
|
flat spout with circular wick hole and rounded tip. Slightly sunken discus with → filling ← hole on the same axis as the wick hole, but not in the centre of the dis |
|
| 78.12.4
|
deeper than the front), small convex shoulder, concave discus with a very small → filling ← hole in the centre. Nozzle is flat with concave sides , a rounded tip an |
|
| 78.12.5
|
Shallow circular body, slight shoulder leading to a large concave discus with a → filling ← hole on the central axis, but further forward. Medium nozzle with concav |
|
| 78.12.6
|
Shallow circular body with slightly concave discus with small circular → filling ← hole and a shallow circular base. Short flat nozzle with concave sides a |
|
| 78.12.7
|
Shallow circular body, small shoulder with concave discus with a small → filling ← hole just off the centre of the discus. Medium nozzle, flat with concave |
|
| 78.12.9
|
Large, deep, circular body, small convex shoulder, concave discus with a small → filling ← hole at the center. Medium flat nozzle (broken) concave sides with a sma |
|
| 79.1.1
|
Deep Circular body, concave discus with a wide → filling ← hole. Flat nozzle with an oval wick hole. Small pierced lug on the right |
|
| 79.1.10
|
Circular shallow body, concave discus with a small → filling ← hole in the centre. Long flat nozzle with concave sided which meet the t |
|
| 79.1.12
|
Circular shallow body, concave discus with a small circular → filling ← hole in the center. Small demarcated base, slightly concave. Long nozzle |
|
| 79.1.14
|
ns all the way around the wick hole in a continuous form. The wick hole and the → filling ← hole are the same size and are in line with each other, there is also wh |
|
| 79.1.16
|
r than the front. Shoulders are convex, discus is concave with a small circular → filling ← hole in the centre. Long deep nozzle, sides follow smoothly on from the |
|
| 79.1.18
|
Rough oval shape, very flat body with a flat discus and → filling ← hole in the centre. There is no nozzle, just an elongation of the discus |
|
| 79.1.2
|
Deep circular body with a large circular → filling ← hole in the centre of the discus. Flat long nozzle with a small circular |
|
| 79.1.3
|
Circular deep body with slightly concave discus, large → filling ← hole and a shoulder lug on the right hand side. Flat nozzle, small oval |
|
| 79.1.4
|
Small Circular body with a convex shoulder and a small flat discus with a large → filling ← hole. Small lug on right hand side with dent in the top, this however do |
|
| 79.1.5
|
Circular body with convex shoulder and a concave discus with small → filling ← hole. Small raised protruding foot with flat base. Large vertical handle |
|
| 79.1.7
|
rge round wick hole and a rounded tip. Concave discus and wide ring base. Small → filling ← hole, just off centre probably due to decoration.
|
|
| 79.1.8
|
rcular body with a convex shoulder and a small concave discus with an irregular → filling ← hole at the centre. Nozzle is slightly arched and splayed at the tip wit |
|
| 79.1.9
|
Deep circular body, small concave shoulder leading to large → filling ← hole. Flat long nozzle with concave sides, a splayed tip and an irregula |
|
| REDMG:1953.25.77
|
ircular, deep body, flat shoulder, slightly raised, concave discus with a small → filling ← hole in the centre. the beginnings of two nozzles, both sided are concav |
|
| REDMG:1953.25.78
|
Circular shallow body, concave shoulder leading to a large → filling ← hole. Beginnings of a band handle. Wide shallow nozzle tilts slightly up |
|
| REDMG:1953.25.79
|
Small Circular body, convex shoulder, rim of large central → filling ← hole is concave. Large slightly raised nozzle, rounded tip with a large |
|
| REDMG:1964.1603.1
|
ower body wider than the upper. Flat , slightly concave rim to a large circular → filling ← hole. nozzle is long and flat with small oval wick hole at the tip and a |
|
| REDMG:1964.1604.1
|
Circular body with small convex shoulder leading to a large circular → filling ← hole. Nozzle is straight sided with a slightly dipped tip, level top and |
|
| REDMG:1964.1605.1
|
Small Circular body, convex shoulder, rim of large central → filling ← hole is concave. Large flat nozzle, rounded tip with a large oval wick h |
|
| REDMG:1964.1606
|
almost in the shoulder, just protruding slightly to form a lip. Large circular → filling ← hole, small oval wick hole. raised circular foot with rough edge. At th |
|
| REDMG:1964.1607.1
|
Very small almost circular body, convex shoulder with large circular → filling ← hole. Nozzle affects the circular shape of the body, almost forming a li |
|
| REDMG:1964.1608.1
|
ircular body, convex shoulder, concave rim leading to a large circular, central → filling ← hole. Flat long nozzle with slightly down-turned oval wick hole and a ro |
|
| REDMG:1964.1609.1
|
the shape. Flat shoulder, raised rim of discus and slightly sunken discus with → filling ← hole just off the central axis to the front right. Small straight sided |
|
| REDMG:1964.1610.1
|
Ovoid body, convex shoulder, medium rounded → filling ← hole in the centre at the highest point. Nozzle is part of the body and |
|
| REDMG:1964.1611.1
|
Circular body with convex shoulder and small concave discus (→ filling ← hole is destroyed). Small deep nozzle rounded tip and sides, medium size |
|
| REDMG:1964.1612.1
|
Main body; circular with long nozzle, low girth, rim of large circular → filling ← hole is stepped down from the shoulder. Nozzle is smooth and cylindrical |
|
| REDMG:1964.1614.1
|
ar body, nearly straight convex shoulder and a deep concave discus with a small → filling ← hole at the centre. Nozzle was flat and had a small round wick hole and |
|
| REDMG:1964.1615.1
|
, convex shoulder, small circular concave discus with reasonably large central → filling ← hole. Small rounded nozzle with a medium sized flat, circular wick hole, |
|
| REDMG:1964.1616.1
|
the shape. Flat shoulder, raised rim of discus and slightly sunken discus with → filling ← hole just off the central axis to the front right. Small straight sided |
|
| REDMG:1964.1617.1
|
Circular shallow body, concave shoulder with large circular → filling ← hole. Flat, slightly upward tilting nozzle narrowing towards the rounded |
|
| REDMG:1964.1618.1
|
Main body; circular with long nozzle, low girth, rim of large circular → filling ← hole is stepped down from the shoulder. Nozzle has concave sides, tip is |
|
| temp.2014.12.1
|
et for daily use. Rounded body jar with flat base, a pouring spout and a bigger → filling ← aperture; a single handle from the middle of the neck to the upper part |
|