| 13.10.17
|
Barrel-shaped jug, deep-spreading lip, half has broken away. One handle, with a raised area along the middle. Clay on body rounded into a point in the middle of either side.
|
|
| 13.10.2
|
Nearly rectangular piece, lentoid in section, narrowing gradually on all sides, raised more prominently on one side, which has a ridge down the centre of the lower part.
|
|
| 13.10.28
|
Seated female figurine of Kourotrophos holding child on lap, with raised head. Seated on chair with flat back.
|
|
| 13.10.3
|
Nearly rectangular piece, bilaterally symmetrical, with a raised rib down the centre, two parallel rivets, one on either side, at the shoulder, just above the tang (where the blade may have been socketed into a wooden handle. The thickness is uniform for most of the length of the dagger. )
|
|
| 14.9.58
|
Conical with narrower neck at one end and widening to a lip at the other like a miniature vase. End with lip slopes inwards to a raised central circle.
|
|
| 22.3.40
|
Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base.
Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia')
|
|
| 23.11.1
|
Bowl with incurving rim, diagonal profile in lower body, and raised base. Previously described as lamp of kothon type.
|
|
| 23.11.31HH
|
Circular shield with raised rim and large domed central boss.
|
|
| 23.11.31ZZ
|
Female facing right, wearing a long skirt marked with horizontal bands. The straight line of the back projects above the head. One arm is raised in front of the body, and the other is held at waist level.
|
|
| 26.4.1A-B
|
Lid: central 'pagoda-like' knob. Pyxis: feet are grooved horizontally; raised base is slightly convex.
|
|
| 35.4.4
|
Trefoil lip oinochoe, with a handle of ellipsoid cross-section that is raised higher than the lip. The body is spherical and the short foot is conical. Gill's shape 5c.
|
|
| 45.6.31
|
Neck amphora with wide mouth; long, wide neck; two vertical handles from top of rim to middle of body; donut shaped body slopes into thick stem; small, flat foot; flat resting surface and slightly raised underside.
|
|
| 45.6.70
|
Circular shallow body with flat shoulder and a concave discus with small filling hole towards the right edge of the discus. Body shallower at the front end and the widest part of the body has a raised band around it. Short rounded nozzle and circular smoke hole. Vertical handle with a circular hole which runs down towards the base. Base demarcated but not raised and slightly off centre. There are two small shoulder lugs on opposing sides.
|
|
| 45.6.71
|
Circular body with a flat bad around the widest part. Slightly convex shoulder and a concave discus with a small irregular filling hole roughly in the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical handle extends towards base and has a small hole. Base is demarcated but not raised.
|
|
| 49.1.2
|
A slim alabastron with a small mouth and a projecting rim, an offset neck, lugs on either side of the body near the neck, and a raised three-stepped foot that is slightly concave on the underside.
|
|
| 50.4.25
|
Circular body, concave discus with a circular filling hole to the frontal left hand side. Flat nozzle with concave sides and single ended volutes, the tip is splayed and ends in an obtuse angle, the wick hole is circular. There is a base demarcated but not raised, the base is slightly concave.
|
|
| 50.4.5
|
Type 7a. Cut-away neck, with a vertical strap handle attached to the lowest part, rejoining the body at the bottom of the shoulder; cylindrical neck sharply joining sloping shoulder, which curves into the ovoid upper body, tapering into a cylindrical lower body; raised base; reserved on the interior, underside and resting surface.
|
|
| 50.5.1
|
Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised.
|
|
| 51.7.12
|
Offset rim; origionally two handles of which only one remains, protruding horizontally from just below the rim; body initially rounded but then tapers fairly sharply to very narrow, raised footring; base flat
|
|
| 53.8.1
|
Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around.
|
|
| 54.2.2
|
Everted lip; thin, tapering neck; strap handle curves down from rim to spherical, bulbous body; slightly raised flat foot.
|
|
| 58.2.3A
|
Pyxis: Hemispherical bowl with raised base. Matching lid is 58.2.3B
|
|
| 62.5.1
|
FS (='Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round handle, slightly concave sides that taper sharply below the handle to a raised base that is slightly concave on the underside.
|
|
| 79.1.2
|
Deep circular body with a large circular filling hole in the centre of the discus. Flat long nozzle with a small circular wick hole and a rounded tip. Circular raised foot, slightly concave with a ring in the middle. "Kick" on the inside at the bottom of the reservoir.
|
|
| 79.1.5
|
Circular body with convex shoulder and a concave discus with small filling hole. Small raised protruding foot with flat base. Large vertical handle with one incised line along the length of it and a second band laying across the handle at the highest point, also with an incision along it. Long spout with irregular splayed tip, large oval wick hole. joining lines of the handle and the nozzle are apparent.
|
|
| E.23.27
|
Broad shouldered jar with thin lip, broad neck, and body that tapers down to a conoidic foot which is slightly raised from the rest of the body.
|
|
| E.47.1
|
Circular body with small sunken discus with small filing hole, large raised sholder. Long flat nozzle with a splayed end and a curved tip and oval smoke hole. Small ring base.
|
|
| E.62.40
|
Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall.
|
|
| L.2016.3.14
|
Female dancer, slightly turned to her left in a likewise slight step position. Her right arm slopes down, her left arm is raised and she is looking to her left hand, which is bent backwards. A hole in mentioned hand gives rise to the suspicion that she is holding an (missing) object. There is another hole at her left heel.
|
|
| L.2016.3.31
|
Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
|
|
| REDMG:1934.26.1
|
Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside.
|
|
| REDMG:1935.87.11
|
The base is raised to provide a foot on which to support the weight of the cup.
|
|
| REDMG:1951.132.1
|
Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface.
The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209).
|
|
| REDMG:1951.145
|
Cylindrical lid with inset flat top and raised edge, stepping down in three ridges, broader than the width of the walls; slightly tapering walls terminating in offset flanged rim.
|
|
| REDMG:1951.152
|
Moulded grooved rim, with a flat overhanging lip, atop a thin, nearly cylindrical neck, attached to an ovoid body, ridged at the top; raised base, with thin reseting surface and slightly pointed underside.
|
|
| REDMG:1953.25.2
|
Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band.
|
|
| REDMG:1953.25.28
|
Narrow neck (mostly missing), broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving in to a short stem, attached to a small pedestal foot with a raised base; small nipple at the centre of the underside.
|
|
| REDMG:1953.25.29
|
Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving sharply into a short stem, attached to a small pedestal foot, tapering down, with a slightly raised base; small nipple at the centre of the underside.
|
|
| REDMG:1953.25.38
|
Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim.
|
|
| REDMG:1953.25.52
|
Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside.
|
|
| REDMG:1953.25.57
|
Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
|
|
| REDMG:1953.25.61
|
Moulded mouth, flares to tall rim, which narrows to a tall, cylindrical neck; neck curves gently into a sloping shoulder, grooved near the join to the body, which broadens slightly and then tapers, with slightly concave sides, to a slightly raised base, grooved on the resting surface, flat on the sunken underside.
|
|
| REDMG:1953.25.62
|
Broad mouth with thickened downturned rim. Slender neck sloping to a nearly horizontal shoulder, from which emerge two lug handles, just below a moulded band; finely ribbed body that tapers to a short raised base.
|
|
| REDMG:1953.25.64
|
Narrow neck, nearly flat shoulder, curving to a broad body, tapering slightly down, to a slightly raised base, concave at the centre; two pinched triangular round handles rise from the edge of the shoulder, on opposite sides of the bottle.
|
|
| REDMG:1953.25.76
|
Shallow bowl with incurved rim; raised base, with grooved resting surface.
|
|
| REDMG:1953.25.77
|
Large circular, deep body, flat shoulder, slightly raised, concave discus with a small filling hole in the centre. the beginnings of two nozzles, both sided are concave with large decorative features protruding from either side. Base of handle remains with half of the hole left. Ring base, slightly concave.
|
|
| REDMG:1953.25.79
|
Small Circular body, convex shoulder, rim of large central filling hole is concave. Large slightly raised nozzle, rounded tip with a large oval wick hole, slightly irregular underside to nozzle. Small straight sided circular foot with a flat base. Slight anomaly at the bottom of the reservoir in the centre.
|
|
| REDMG:1953.25.9
|
Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
|
|
| REDMG:1958.113.1
|
Ovoid aryballos, with a rounded mouth (now broken), small round vertical handle reaching from just below the mouth to the bottom of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, bossed on the underside.
|
|
| REDMG:1961.199.1
|
Very narrow neck, from which loops up a small, narrow strap handle, which rejoins at the middle of the broad shoulder. The shoulder curves into a bulbous body, grooved just above a slightly raised base. The underside is slightly concave at its centre. Some circular ridges (comb ot wire marks) remain on the underside.
|
|
| REDMG:1964.1606
|
Small circular body with wick hole almost in the shoulder, just protruding slightly to form a lip. Large circular filling hole, small oval wick hole. raised circular foot with rough edge. At the bottom of the reservoir is a lump, probably from the patrix ?
|
|
| REDMG:1964.1609.1
|
Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
|
|
| REDMG:1964.1610.1
|
Ovoid body, convex shoulder, medium rounded filling hole in the centre at the highest point. Nozzle is part of the body and is the most acute angle, elongated oval wick hole piercing the body. Irregular flat lateral pinched handle, base is a slightly raised ring mirroring the ovoid shape of the body.
|
|
| REDMG:1964.1616.1
|
Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
|
|
| REDMG:1964.1619.1
|
Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base.
|
|
| REDMG:1964.1622
|
Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside.
|
|
| REDMG:1964.1625
|
Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside.
|
|
| REDMG:1964.1632.1
|
Deep skyphos. Thin rim, slightly averted, below which u-shaped round horizontal handles are attached, and rise slightly to just above the height of the walls. The sides, tapering down, are slightly convex at the top and concave below, terminating in a groove, just above the short raised base with a flat underside, grooved on the outside.
|
|
| REDMG:1964.1647
|
Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
|
|
| REDMG:1964.1663
|
Rounded, slightly raised rim; two pinched round horizontal handles, round in section, rise at a diagonal from the sloping shoulders which curve gently down to a small raised base, concave on the underside.
|
|
| REDMG:1964.1667.1
|
Ovoid, slightly baggy body; raised base with concave underside.
|
|
| REDMG:1997.209.3
|
Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
|
|