| 14.9.106
|
Small bowl, 'later and light', according to Gill 1986; shallow bowl with incurving rim and torus ring foot with concave inner face
|
|
| 2005.2.4
|
Ring foot, sloping on the interior, torus profile on the exterior.
|
|
| 29.11.2
|
Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center.
Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments').
|
|
| 45.6.18
|
Flared mouth with flat on the top rim. Single strap handle curves from top of shoulder down to top of body. Small torus flat base, divided from the body with a groove.
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p40, lip type j
|
|
| 45.6.37
|
Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot.
|
|
| 47.2.1
|
Type B, formerly known as 'Glaux'. Rounded, incurved rim, below which are two round handles, one horizontal and one vertical; tall bulbous body tapering towards torus ring foot.
|
|
| 47.2.12
|
Rounded, slightly incurved rim; shallow convex upper wall divided by a reserved groove from a sharply concave wall that runs continuously down to the foot, although only a single curve is perceived on the interior. Short torus ring foot, with a narrow reserved resting surface and a reserved medallion at the centre of the underside, circumscribed by a concentric ridge. Convex-concave profile.
|
|
| 47.2.3
|
Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
|
|
| 47.2.6
|
Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot.
|
|
| 47.2.8
|
Thickened, slightly everted rim, surmounts a wide shallow bowl; ring torus foot.
|
|
| 47.2.9
|
Small bowl, 'later and light', according to Gill. Cf. Reading 14.9.106
Shallow bowl with incurving rim, concave on inner face, torus ring foot, circular ridge in middle of underside before convex centre.
|
|
| 50.4.10
|
Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside.
|
|
| 50.4.12
|
Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
|
|
| 50.4.13
|
Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove.
|
|
| 50.4.15
|
Rim curved slightly outwards. Inclining neck of roughly equal depth and diameter as bowl. Small vertical handles curving from rim to mid-section. Convex bowl. Torus (tyre shaped) foot with no stem.
|
|
| 51.4.9
|
The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath.
Cf. Agora 12 part 2, no. 1117, pl. 38
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59
|
|
| 51.7.8
|
Cup mouth with slightly concave upper surface, tubular neck offset from mouth and shoulder; ridged vertical strap handle loops up from top of neck and descends directly to the shoulder; squat body; broad torus ring foot.
|
|
| 55.1.1
|
Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body.
|
|
| 56.8.2
|
Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug.
|
|
| 60.1.3
|
Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove.
|
|
| 60.1.4A-B
|
Pyxis: inverted rim slightly hanging over bulbous body; small, ring torus foot above a slight groove; convex underside
Lid: Gently slopes up to stem and donut shaped knob.
|
|
| 60.8.2
|
Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot
|
|
| 71.6.3
|
Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot
|
|
| L.2011.1.1
|
Quite cylindrical handle, extending from the rim to the shoulder, slightly rising over the rim. Ridge between rim and neck. Cylindrical neck; torus rim (convex).
|
|
| REDMG:1926.99.60
|
Cup mouth, cylindrical neck, to which inside of handle is attached and rises, rejoining at the shoulder; body with straight sides descending from carination at bottom of shoulder; lower body curves in to join molded pedestal foot, with slightly sloping upper surface, scotia above torus on vertical surface, and flat underside.
|
|
| REDMG:1953.25.1
|
Type B, formerly known as 'glaux' variety. Slightly incurved rim, below which is attached a one side a round horseshoe-shaped handle, canted slightly up to the level of the rim, and on the other side a ridged strap handle that rejoins just above the middle of the body; convex side walls; torus ring foot with slightly convex underside.
|
|
| REDMG:1953.25.22
|
Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre.
|
|
| REDMG:1953.25.45
|
Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
|
|
| REDMG:1953.25.46
|
Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
|
|
| REDMG:1953.25.47
|
Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
|
|
| REDMG:1953.25.54
|
Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
|
|
| REDMG:1964.1631
|
Very thin walls, with rounded rim, just below which are attached horizontal handles. Walls slightly concave, divided from a spreading, lipped torus ring foot, with a pointed resting surface, by a pair of grooves. This example corresponds to Ure's Class II.C skyphos, particularly (ii) which includes reddish-purple bands just below the level of the handles, perhaps a band at the bottom of the body where it joins the ring foot, and concentric purple bands on the underside (or plain black or reserved undersides). See Ure 1927, 24.
|
|