| 13.10.4A-B
|
Two slightly concave disks, not joined (although they sit together well). The lid is thinner than the base with no significant rim, but a beveled edge. The mirror itself has a rim on the underside, and an offset edge on the upper part. These are clearly two parts of a Hellenistic mirror with lid, typical of Hellenistic cyprus. A pair of bronze plates could be locked together because one mirror had a low cylindrical rim into which the other, with a flanged edge, could be fitted. The inside mirror is decorated on the recessed side and polished on the flat side. The outside mirror is polished on the recessed side and sometimes decorated on the flat side. The two polished sides would then lie together, sometimes plated with silver (as in the case of an example in Amathus tomb 62, published in Excavations in Cyprus). For the Greek prototypes see See A. Schwarzmaier, Griechische Klappspiegel: Untersuchungen zu Typologie und Stil (Berlin 1997).
|
|
| 14.9.58
|
Conical with narrower neck at one end and widening to a lip at the other like a miniature vase. End with lip slopes inwards to a raised central circle.
|
|
| 2007.9.12
|
Three sided, one side considerably shorter than other two.
|
|
| 2007.9.5
|
One long, straightish edge, the other edge in a convex curve, over all forming the vague shape of a semi-circle.
|
|
| 2008.7.3
|
Rectangular fragment thicker at one end and curved sharply at the other. Possibly a handle fragment.
|
|
| 2018.6.2
|
Long cylindrical bar pointed at one end and flattened at the other
|
|
| 22.3.6
|
Corinthian type. Handles are circular and horizontal and opposite each other.
|
|
| 22.9.5
|
Sphere with base and one side handle still present. Only half intact with one side handle. Other handle and some other pieces with it but just fragments. Base of cup badly chipped. Underside of cup's base is inverted.
|
|
| 23.11.31IIII
|
Female facing left, wearing a pointed headdress over long styled hair. One hand appears to be held up to the face. There is a thin spike projecting upwards at the back. The skirt is belted at the waist, and is patterned with vertical bands containing zigzags or chevrons which terminate at a shin-length curved hem. The left shin and foot appear angled back to the other foot, giving the figure the appearance of walking.
|
|
| 23.11.31ZZ
|
Female facing right, wearing a long skirt marked with horizontal bands. The straight line of the back projects above the head. One arm is raised in front of the body, and the other is held at waist level.
|
|
| 27.4.5
|
Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence.
|
|
| 37.11.8
|
The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base).
|
|
| 45.6.33
|
Outturned rim; tall thin neck leading into broad shoulder with two lugs opposite each other; almost vertically-sided body; flat base surrounded by very slight ridge.
|
|
| 45.6.66
|
Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences.
|
|
| 47.2.21
|
Bell, with a rounded lower edge, narrowing sharply and then tapering slowly to a rounded shoulder, where it is attached to a round knob, hollowed on one side, thickened on the other, pierced with a hole; there is another hole in the top of the bell, just below the hollowed part of the knob. A hand-modeled striking ball is attached, with a thin piece of jute string, knotted through the top hole and lowered through the bottom hole.
|
|
| 59.10.11
|
Small metal figurine of South East Asian iconography. Figure sitting cross-legged with one hand touching the floor and the other resting on top of leg in a mudra gesture.
|
|
| 60.4.1
|
Orange rectangular box with two small circular specimen pots one with blue enamel flakes and the other with orange enamel flakes and three fragments of building material.
|
|
| 73.6.1
|
Black-figure pot fragment shaped triangularly. One side consists of a slightly curved singular line, whereas the other side comprises of two straight lines that connect with each other when meeting midway. One end is tipped where the two sides meet, while the other end is a straight line in shape.
|
|
| 73.6.5
|
Rectangular pot fragment with one side being more curved in shape, and the other consisting more of a straight line. One end is longer than the other owing to the curved side making it so.
|
|
| 78.12.8
|
Circular body, small convex shoulder with a slightly concave discus, two small holes on the discus, one on the central axis, the other just slightly off to the left. The nozzle is small and flat with a rounded tip and a circular wick hole, just off centre. Vertical handle extending towards the base at the back with a small hole though the centre. Demarcated base is flat except for a small depression.
|
|
| 79.1.14
|
large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
|
|
| 83.2.4
|
Horn shaped fragment, with smooth outside. Pointed one end and moderately flat on the other.
|
|
| 83.2.5
|
Horn shaped fragment, with smooth outside. Pointed one end and moderately flat on the other.
|
|
| E.23.33
|
Lip is unpronounced, long neck flares to shoulder/widest point, which then tapers to pointed foot. The rough handles are directly opposite each other on the widest point.
|
|
| E.62.22
|
Oblong in shape and is almost flat except at the ends of the teeth which taper. Double edged with narrow teeth, close fitting at one end and wider teeth with larger gaps at the other. There are 42 narrow teeth and 10 wide teeth.
|
|
| L.2011.1.25
|
Thick Disc, with one surface slightly wider then the other one.
|
|
| L.2016.3.21
|
Microlith tool, with flat ventral surface and two dorsal-grates on surface, one rounded and one straight. The short sides are serrated, the long sides are slightly rounded cut off (one uneven and convex, the other concave).
|
|
| REDMG:1953.25.1
|
Type B, formerly known as 'glaux' variety. Slightly incurved rim, below which is attached a one side a round horseshoe-shaped handle, canted slightly up to the level of the rim, and on the other side a ridged strap handle that rejoins just above the middle of the body; convex side walls; torus ring foot with slightly convex underside.
|
|
| REDMG:1964.1612.1
|
Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle is smooth and cylindrical with one side deeper than the other. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small slightly of centre foot is circular and has a concave base. Kick on the interior of the base.
|
|
| TEMP.2003.6.7
|
Two-handled skyphos. The handles are of ellipsoid cross-section, riddled and curving upwards (higher than the body). a) Part of the rim and body. c) Part of the body. d) One handle and part of the body. e) Part of the other handle. f) Tiny bit of the handle. g) Part of the handle and body.
|
|
| TEMP.2005.1.3
|
Round shape with triangular handles parallel to each other and a small circular base.
|
|