| 2008.7.119
|
Trapedoidal fragment, curves upwards from centre into a semi-circular peak.
|
|
| 2008.7.136
|
Rectangular fragment. Getle dip in the middle curving upwards either side to create a waved shape.
|
|
| 2008.7.138
|
Reactangular fragment, curves upwards towards rim.
|
|
| 2008.7.140
|
Trapezoidal fragment, curves upwards towards rim.
|
|
| 2008.7.153
|
Reactangular fragment, curves gently upwards at one end.
|
|
| 2008.7.157
|
Triangular fragment, curves gently upwards at one end.
|
|
| 2008.7.52
|
Triangular fragment, curves upwards towards the mouth.
|
|
| 2008.7.64
|
Rectangular fragment of rim, curves upwards.
|
|
| 2008.7.65
|
Trapezoidal Fragment, curves upwards.
|
|
| 23.11.31IIII
|
Female facing left, wearing a pointed headdress over long styled hair. One hand appears to be held up to the face. There is a thin spike projecting upwards at the back. The skirt is belted at the waist, and is patterned with vertical bands containing zigzags or chevrons which terminate at a shin-length curved hem. The left shin and foot appear angled back to the other foot, giving the figure the appearance of walking.
|
|
| 23.4.1
|
Stemless. Groove separating slightly flaring rim from body. Handles curve slightly upwards from the top of the body. Another groove at join between body and foot.
|
|
| 29.11.2
|
Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center.
Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments').
|
|
| 29.11.6
|
Two u-shaped horizontal handles placed slightly above the lip, slightly angled upwards. Deep body descending to a groove above the ring base.
|
|
| 37.11.8
|
The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base).
|
|
| 39.1.1
|
Vertical ring handles, spurred, start directly from rim and finish at the moulded rim around the body, and tilt slightly upwards. Moulded foot, all black, conical inside with narrow, slightly concave, resting surface.
|
|
| 47.2.4
|
Rheneia cup: stemless cup with riddled handles of ellipsoid cross-section that curve upwards and ring-shaped base.
|
|
| 47.2.7
|
Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside.
|
|
| 47.7.1
|
Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside.
|
|
| 48.12.1
|
Deep bowl; almost vertical sides; two rounded handles progress straight upwards from the middle of the body; slight groove before small foot; concave base
|
|
| 48.12.10
|
Long tall neck from the top of which handle loops up and then down to join edge of broad shoulder, curning slightly upwards. Straight body; sturdy, flat foot; concave base.
Cf. Smith 2003, BSA 98, p349, footnote 24, pl. 58 d-f (see also 'comments').
|
|
| 48.12.3
|
Tall, slightly out turned rim; small rounded horizontal handles at the beginning of the body, rising upwards, fairly deep body; thick conical footring; conical underside.
|
|
| 48.5.2
|
Mouth has thin rim and near vertical walls tapering down to neck; two upside down U-shaped handles start mid-neck and curve upwards before joining the shoulder; inverted ovoid body; near conical foot with mirrored concave base.
|
|
| 49.8.3
|
Very broad, up sloping rim; two handles start near the top of the body and curve vertically upwards; tall body with vertical sides curves down uninterrupted into stem; thick, flat foot with ridge at top; conical underside.
|
|
| 49.8.7
|
Ridge between shallow bowl and outurned rim; two cylindrical handles curve upwards from just below ridge; hole in base where stem was
|
|
| 50.3.1
|
Flat rim; shallow mouth; broad neck; two handles curve upwards from near the bottom of the neck to the top of the body; small ridge between neck and shoulder; body tapers into broad, thick, flat base; underside concave.
|
|
| 51.1.2
|
The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part.
|
|
| 51.1.3
|
Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base.
|
|
| 51.4.10
|
Thin, out-turned rim; rounded body; rounded handles curving upwards; flat bottom; tiny base
|
|
| 51.4.9
|
The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath.
Cf. Agora 12 part 2, no. 1117, pl. 38
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59
|
|
| 56.8.3
|
Deep body tapers sharply towards foot; circular handles curve slightly upwards without reaching the height of the rim; conical footring.
|
|
| 78.12.16
|
Deep circular body with a rounded shoulder terminating in a large filling hole. Long rounded nozzle titling slightly upwards, irregular rounded tip and an oval wick hole. Large splayed foot. Small vertical lug on the right hand side.
|
|
| E.23.30
|
Squat, gourd-like in shape with handle. Neck is long, the handle attaches to the top of the shoulder, follows the handle upwards for a centimetre and the bends back to reattach on the upper body. The body is spherical in shape, tapering to a small disc base.
|
|
| L.2016.3.31
|
Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
|
|
| REDMG:1935.87.14
|
Two shallow handles, facing upwards.
|
|
| REDMG:1935.87.3
|
Mouth has flat rim and flares upwards.
|
|
| REDMG:1935.87.6
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
|
|
| REDMG:1953.25.39
|
Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface
|
|
| REDMG:1953.25.40
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface.
|
|
| REDMG:1953.25.41
|
Flanged rim and tapering body, to which are attached horizontal triangular strap handles, slightly canted upwards. The body narrows sharply to short stem, slightly offset from the top of a moulded foot, with a vertical exterior surface and a conical indentation on the underside, and a narrow resting surface.
|
|
| REDMG:1953.25.78
|
Circular shallow body, concave shoulder leading to a large filling hole. Beginnings of a band handle. Wide shallow nozzle tilts slightly upwards, large oval wick hole. flat unlimited base.
|
|
| TEMP.2003.6.12
|
The handle is riddled, of ellipsoid cross-section, curving upwards, higher than the rim.
|
|
| TEMP.2003.6.6
|
Two-handled skyphos. The double, riddled handle is of ellipsoid cross-section and curves upwards (higher than the body).
|
|
| TEMP.2003.6.7
|
Two-handled skyphos. The handles are of ellipsoid cross-section, riddled and curving upwards (higher than the body). a) Part of the rim and body. c) Part of the body. d) One handle and part of the body. e) Part of the other handle. f) Tiny bit of the handle. g) Part of the handle and body.
|
|