Ure Museum Database



Browse
There are 42 objects for which Shape_description contains → three
11.10.16 Miniature. Open mouth with slightly flared rim. Body with a wide neck, three grooves on lower body, two grooves on foot ring base conical with flat resting surface.
14.9.89 One of three joining fragments (with 14.9.90-91) preserving part of the rim.
2006.12.108 Fragment of lid ? of vessel with three spurts over edge; presumably there was once a fourth.
2007.9.12 Three sided, one side considerably shorter than other two.
2008.7.27 Four-sided fragment; three straight, one curved.
2022.7.8.a a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.b a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.c a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.d a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.e a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.f a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.g a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.h a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.i a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.l a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.m a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
22.3.20 Moulded overhanging rim in three sections, reaching to the point of attachment of the handle on the front of the fragment.
25.8.5 The handle is in three tiers, with a point at the tip.
26.12.27 Body narrows slightly towards top. At the bottom of the body there is a wider ledge attached to which there are three moulded lion paws as feet.
26.2.5 Rim and body sherd (three joining but not mended fragments) of East Greek (North Ionian) pottery rosette bowl;
26.7.13 Rhomboid in section at the base, and curving towards the point; three protrusions at the base would have been used to secure the arrowhead to the shaft.
27.4.5 Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence.
35.5.12-14 Three fragments
35.5.27-29 Fragments, 1 consisting of seven pieces joined, 2 of two, 3 of three, probably all from one cup.
35.5.34A-Q Eighteen fragments of one piece, some fragments joined (a and f each comprised of three fragments joined together, i comprised of two fragments joined.
48.5.1 Three knuckle-bone shaped handles with holes for suspension(?)Small ring foot.
51.4.11 Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join.
60.4.1 Orange rectangular box with two small circular specimen pots one with blue enamel flakes and the other with orange enamel flakes and three fragments of building material.
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section.
78.12.19 Shallow ovoid body, convex shoulder with a small depressed discus; three small holes in the discus. Nozzle is joined into the body shape and has a rounded tip with a medium oval wick hole. Small vertical handle opposite the nozzle. Base is unmarked but slightly concave.
79.1.14 large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
E.23.38 Coffin lid ornament: backbone of Osiris. The object is a cross shape. The horizontal piece of the cross is a square with three horizontal lines carved across it. This is placed about nine-tenths of the way up the vertical piece. Just below the horizontal square are three finer carved lines.
E.23.40.1-4 Three pieces unattached but found together. The panels are very thin and the ring does not meet beneath them but is attached either side.
E.23.45 Small tweezers with a loop on one end, originally loose in the hinge for hanging. Tweezers are made from three pieces, a central straight but shorter section and two longer but curved inwards sections which would have been the pieces that would have bent together to hold the hair or splinter.
E.62.40 Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall.
E.62.60 Large mouth, no neck, three handles for string, widest part is mid-way down the body, flat base.
E.65.6 Long, thin ornament from a coffin lid: the centre appears to have a kind of knot carved into it with three ridges on either side of this.
REDMG:1951.131.1 Slim alabastron with narrow mouth, projecting rim, slightly convex on the upper surface, and beveled at the edge, flat on the underside; tall, slightly concave neck, offset from a tall ovoid body, with two small lug handles on the upper 1/4 of the body; molded pedestal foot is comprised of a tapering upper element broadening into a disk foot, with a diagonal outer surface, with three ridges, a flat resting surface, and a conical indentation on the underside.
REDMG:1951.145 Cylindrical lid with inset flat top and raised edge, stepping down in three ridges, broader than the width of the walls; slightly tapering walls terminating in offset flanged rim.
REDMG:1953.25.32 Kalathos-shaped body, with a flaring rounded rim, to the top of which are attached the looped ends of a pair of strap handles, concave on their exterior surfaces; the tubular ends of the loops rejoin the middle of each handle, and below the bottom of each handle, attached at the bottom of the cup, is a spur. Below a carination, the bottom of the cup narrows to a nearly cylindrical stem, ridged at the center, below which it widens, and smoothly curves into the top of a moulded foot, with three ridges, of increasing diameter, on the exterior surface. Within the narrow resting surface is a concave underside, with a conical hollow at centre.
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim.
TEMP.2007. 2.69 Three conjoined ceramic cords
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH