Ure Museum Database



Browse
There are 71 objects for which Shape_description contains → thick
13.10.21 Course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, then tapers inwards slightly to meet the body, the ring foot is short and quite wide.
13.10.8 Shallow but wide mortar with small lip and rim. Very thick body gradually leading to a small concave foot.
14.9.50 Fragment. Flat-topped projecting rim, flaring outwards. Clay is thick at the point where the rim begins to flare outwards.
2022.7.8.a a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.b a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.c a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.d a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.e a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.f a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.g a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.h a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.i a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.l a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.m a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
22.9.7 Broad concave rim; short neck flowing into bulbous body; crude, thick strap handle joins body from rim and shoulder; short foot; broad, flat base.
26.12.23 Miniature. Stem thick and solid. Handles narrow and pinched.
26.7.2 The handles are riddled, of ellipsoid cross-section and incurving. The stem is high and thick and the foot is disk-shaped, while the concave area of the base forms a conical center.
35.4.5 Wide overhung rim; handles come up to beneath the overhang in a right-angle shape; body tapers to small thin stem; very thick footring; underside recedes in almost conical shape.
45.10.1 High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
45.10.5 Shallow bowl with wide interior, short stem and thick footring.
45.6.31 Neck amphora with wide mouth; long, wide neck; two vertical handles from top of rim to middle of body; donut shaped body slopes into thick stem; small, flat foot; flat resting surface and slightly raised underside.
45.6.37 Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot.
45.6.41 Shallow cup with thick rim, no handles, and a small foot. Flat resting surface and conical base.
45.8.2 Wide flaring mouth with thick rim
48.12.3 Tall, slightly out turned rim; small rounded horizontal handles at the beginning of the body, rising upwards, fairly deep body; thick conical footring; conical underside.
49.8.10 Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
49.8.12 Flaring mouth, flat rim on the top; single strap handle curves down from top of neck to shoulder; body tapers to thick disk foot; flat base except for concave central circle. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p48, pl. 16 nos. 18.52 & especially 18.62 (feet missing so cannot be compared)
49.8.3 Very broad, up sloping rim; two handles start near the top of the body and curve vertically upwards; tall body with vertical sides curves down uninterrupted into stem; thick, flat foot with ridge at top; conical underside.
49.8.6 Trefoil lipped; thin neck; thick strap handle curves down from back of lip to lower body; half-sphere shaped body; flat base.
50.10.1 Coldstream (79) classes this amphora as part of the 'plump and ungainly group' of LG IIb amphorae whose potters modelled amphora bodies after those of pitchers (see J.M. Cook, BSA 42, 151). Flaring mouth with rounded, thickened rim; two vertical strap thick handles extend from the top of the decorative zone on the neck down to the bottom of the decorative zone on the shoulder; rounded body tapers to a ring foot. Flat underside
50.10.5 Incurving, rounded on the top rim; fairly deep bowl curves into thick low stem; two tiny grooves at join of stem and base; broad, flat foot; conical underside.
50.3.1 Flat rim; shallow mouth; broad neck; two handles curve upwards from near the bottom of the neck to the top of the body; small ridge between neck and shoulder; body tapers into broad, thick, flat base; underside concave.
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside.
50.4.4 Female mask (hollowed at back), with gaping mouth, hollowed eyes, hair arranged in thick ridges, at side of head and above brow (fringe).
50.4.8 Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder.
50.5.2 Large bell krater with a downturned rim, two recurved handles on the upper part of the body, lower body sloping to a thick stem and a molded pedestal foot.
50.5.3 Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot. Base convex underneath.
51.1.3 Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base.
51.7.11 A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot.
51.7.13 Small pseudo-panathenaic amphora with downturned rim (and skewed mouth), offset neck divided from the sloping shoulder by a ridge, vertical strap handles curving up from the bottom of the neck to the bottom of the shoulder, ovoid body tapering to a thick stem, and a curved pedestal foot that is highly concave on the interior.
51.7.16 Wide cup mouth with a reserved, flat rim. Two tripartite strap handles rise up from the neck and join the body at the shoulders. Ovoid body tapers to a thick disk foot, beneath a short (restored) stem. Base is concave
52.3.3 Broad flat rim; short thick neck; handles are comprised of two vertical bars joined at the rim by an overhanging horizontal bar with downward protrusions at either end; body tapers to conical footring; flat base.
61.6.1.5 Small bowl with a thick, uneven rim, concave sides, and small base.
61.6.4 Deep skyphos with thickened round rim, groove just below, straight walls of unusually deep body that narrows, with a sharp cuve at the bottom, to a short concave stem, and a thick disk foot, rounded on the exterior and angled on the interior, with a flat resting surface and a slightly concave underside. Two u-shaped handles, round in cross section, rise from the upper part of the body to the height of the rim.
71.6.3 Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot
78.12.18 'Cocked hat' lamp, shallow open lamp fashioned from a bowl with two sides folded in to provide a wick rest. The rim is thick and very pronounced leading on to a vertical sided shallow reservoir. the base is flat but there is no foot.
81.9.1 Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder.
E.2002.8.1 Pronounced thick lip, no neck, bulbous body tapering to a pointed base.
E.23.42.1-4 Group of four red beads, unattached but found together. Two are long and thin, one is a shallow but complete circle and the fourth is an incomplete circle and thick.
L.2011.1.23 Circular thick disc
L.2011.1.24 thick disk
L.2011.1.25 Thick Disc, with one surface slightly wider then the other one.
L.2011.1.40 thick disc
REDMG:1934.51.8 Nearly conical shallow bowl, with a slightly incurving rounded rim, slightly convex side walls, and a thick, small foot, with straight sides on the exterior, tapered on the interior; pointed underside. For shape cf. CVA France 6 (Ensenere) pl. 22 and Lamboglia (Atti di I congr. Intrem di Studi Liguri (1950) 39, forma 26.
REDMG:1947.13.1 Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209).
REDMG:1951.144.1 Central well, surrounded by a ridge, rising to broad rim with overhanging vertical lip, tapering slightly in; on the underside the plate curves to a short, thick stem that broadens to a moulded foot, concave and flaring on the exterior surface, hollowed on the interior, with a flat resting surface, pointed at centre of plate.
REDMG:1951.150.1 Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders.
REDMG:1951.159.1 Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
REDMG:1953.25.2 Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band.
REDMG:1953.25.33 Central well, surrounded by a ridge and groove; walls rising to broad rim, just beyond a groove on the upper surface, with overhanging vertical lip, tapering slightly out; on the underside the plate is slightly convex and joins a short, thick, angled ring foot, with a tapering resting surface and a slightly convex, pointed underside.
REDMG:1953.25.35 Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder.
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem.
REDMG:1964.1660 Thick rounded rim, slightly overhanging, above a baggy bowl that narrows sharply to a tapering, slightly concave pedestal foot, with a flat base. The interior of the bowl is concave at the centre. Some irregularities such as uneven edge of base.
REDMG:2003.92.1 Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
REDMG:2003.93.1 Squat wide body that tapers towards a ring base. The body is flat and angled in places. Single-reliefed handle joins the long tapering neck near the thick rim and shoulder.
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem.
TEMP.2022.6.2 course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, protunding edge; the base is smaller than the body and it is flat.
temp.2022.6.2 Apulian/ Messapian ceramic jug, course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth; protunding rim; base is smaller than the body and it is flat
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH