Ure Museum Database



Browse
There are 303 objects for which Shape_description contains → rounded
13.10.1 Rat-tanged dirk (sword blade used as a dagger or spearhead), with long thin blade, pointed at both ends, with sloping shoulders. A rib runs nearly the full length of the piece (flattened in the last 2 cm of the blade end). The middle of the rib, near the attachment end, is thin, rhomboidal in section, narrowing to pointed tip or tang which is turned up slightly at the end. Approximately 1/4 down the length of the blade the flange broadens, so that two flat sides spread from the centre rib. The blade end of the dirk has nearly straight sides, but tapers gently to a rounded tip. Catling's type 1d; near Åstrom's type I4. As Catling suggests (1964, 56) the rat-tailed weapon, the most characteristic of prehistoric Cypriote metal forms, occurs in so many sizes that it is impossible to classify them as swords, dirks, daggers, or even spearheads.
13.10.11.13 Rounded hexagonal
13.10.14 Flat rectangular votive plaque (top slightly rounded) with naked figure in relief.
13.10.16 Rounded rim; deep bowl; two small ribbon handles on rim; thin ring foot.
13.10.17 Barrel-shaped jug, deep-spreading lip, half has broken away. One handle, with a raised area along the middle. Clay on body rounded into a point in the middle of either side.
13.10.20 Rounded rim, pear shaped body, flat base
13.10.24 Cylindrical alabastron, with rounded base, tapering at both ends, more sharply to the mouth; the shape, dimensions, and proportions are comparable to that of Ure 13.10.23, which is, however, complete.
14.9.107 Projecting rim, sloping out on the upper edge, rounded at the outside, and curving on the exterior to the concave wall. Slightly convex underside and thickened base.
14.9.5 Broad necked amphora with wide mouth; two handles descending from rim to rounded body; small, flat base
2007.10.1.5 Rounded rectangle
2007.10.2.160 Square with rounded angles
2007.10.2.232 Rectangular with rounded edges
2007.10.2.241 Rectangular; Rounded edges
2007.9.1.100 Rounded rectangle
2007.9.1.101 Rounded rectangle
2007.9.1.96 Rounded rectangle
2007.9.2.12 Rounded rectangle
2007.9.2.35 Rounded rectangle.
2007.9.2.5 Rounded rectangle
2007.9.2.7 Rounded rectangle
2007.9.2.8 Rounded rectangle
2007.9.3.10 Rounded rectangle
2008.2.1.41 Rectangular; rounded edges
2008.7.130 Long rim fragment, slightly curving but steeply angular on exterior of fragment. Almost a long pyramid in shape, with a curved base.Small rounded handle on one broken edge.
2009.10.2.163 Rounded rectangle
2009.10.2.183 Rounded rectangle
2016.3.2 Ovoid body with convex shoulders and wide central filling hole. Body tapers directly into the nozzle with rounded tip, ovoid wick hole at centre and convex sides. Flat ring foot on the base.
2016.5.1 Projecting disc-shaped rim with rounded lip from which emerges a short tubular neck which curves into a globular body with a flat bottom. A narrow strap handle curves to the shoulder. The bottom of the vase has a small flat recess in the centre.
22.9.1 Pappas figurine consisting of a rectangular body, ovoid in cross-section, flaring at the base, with a concave resting surface. At the top of the body or trunk, two rudimentary 'arms' extend in triangular forms that terminate in rounded stumps; above, the neck rises in a cylinder from which (on the front) extends a protrusion that suggests a nose, above which is a flat piece of clay coiled back on itself, resting against a widening cylindrical 'polos' crown, which is concave at the top.
22.9.6 Rounded base.
23.11.10 Flat base, bulbous lower body to which are attached two horizontal strap handles, which rise slightly; flaring upper body and plain, rounded lip.
23.11.7 Flat base; rounded lower body to which are attached two small triangular handles, circular in cross-section, which rise slightly; sharply curved join to upper body, which flares broadly to a plain, rounded rim.
23.11.8 Flat base; bulbous lower body from which emerge two horizontal handles, circular in cross-section, which rise slightly; carinated at join to upper body which flares broadly to a plain, rounded rim.
25.6.7 Rounded handle with small flat part sticking out at part furthest from main pot
26.12.32 Stemless; rim very slightly offset; two rounded handles protrude from just below the rim in an oblong shape; groove separating body from very small foot
27.4.1 Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot.
27.4.5 Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence.
29.11.8 Flaring, slightly convex rim with rounded lip, smoothly joins a short, straight-sided cup that curves sharply to a slightly offset resting surface, slightly concave. A single strap handle curves arches between the walls of the basket on the inside.
34.10.11 Rounded body narrowing toward base. Small round handle. Spout protruding from the top. Lid with round knob handle.
34.10.15 Gourd-shaped vessel, with an elongated ovoid body tapering into a cylindrical handle that finally terminates in elongated, rounded tip. Pierced in the bottom of the ovoid part, and ca. 2 cm from the tip. Use as a rattle is indicated by the sound of a pebble inside.
34.10.6 Two rounded, horizontal handles at rim on opposite sides; deep, straight sided body; groove; small base
34.10.8 Short cylindrical knob, with grooved flat top, grooved profile, and conical stem broadening to the slightly domed top of the lid. At the midpoint of the lid, beyond a gentle groove and a ridge, the lid flares to a rounded edge, the underside of which narrows to a tapering straight sided walls that would have sat inside the vase to which it belonged (perhaps a stamnos). The underside of the lid is hollowed, rounded, and smooth.
34.8.11 Rounded, deep fat body with a small down turning discus and a large filling hole in the centre, small 'kick' at the bottom of the reservoir. Straight sided flat long nozzle with a slightly oval wick hole. Small foot with a slightly concave base.
34.8.2 it is a small lekythos with a ring flat foot, rounded body, tubular and thin neck, cup mouth with slightly concave upper surface, there is one handle from the upper part of the body to the lower part of the cup mouth
39.8.1 Stemless cup-skyphos with an offset lip terminating in a rounded everted rim; moulded foot comprised of concave element above convex element, interrupted by a ridge at the top.
45.6.29 Bell mouth with rounded upper rim and offset neck.
45.6.66 Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences.
45.6.67 Circular rounded body with a small amount of discus which inverts into the reservoir. The filling hole is large and circular. The nozzle is long and is slightly upturned with a small circular wick hole and a splayed, slightly rounded tip. Shallow foot, slightly concave.
45.6.68 Small circular body with convex shoulder and reservoir meeting at the widest point to form an angular girth. Large filling hole in the center of the body, encircled by a small depression of the discus. Nozzle is flat with slightly curved sides. The tip of the nozzle is flat with rounded, but unequal sides with an oval wick hole. Small shallow circular foot in the center of the body.
45.6.70 Circular shallow body with flat shoulder and a concave discus with small filling hole towards the right edge of the discus. Body shallower at the front end and the widest part of the body has a raised band around it. Short rounded nozzle and circular smoke hole. Vertical handle with a circular hole which runs down towards the base. Base demarcated but not raised and slightly off centre. There are two small shoulder lugs on opposing sides.
45.6.71 Circular body with a flat bad around the widest part. Slightly convex shoulder and a concave discus with a small irregular filling hole roughly in the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical handle extends towards base and has a small hole. Base is demarcated but not raised.
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle.
47.2.1 Type B, formerly known as 'Glaux'. Rounded, incurved rim, below which are two round handles, one horizontal and one vertical; tall bulbous body tapering towards torus ring foot.
47.2.10 Rounded, thickened, out turned rim, broader than base; convex wall descending directly to a flat base, grooved on the underside.
47.2.12 Rounded, slightly incurved rim; shallow convex upper wall divided by a reserved groove from a sharply concave wall that runs continuously down to the foot, although only a single curve is perceived on the interior. Short torus ring foot, with a narrow reserved resting surface and a reserved medallion at the centre of the underside, circumscribed by a concentric ridge. Convex-concave profile.
47.2.21 Bell, with a rounded lower edge, narrowing sharply and then tapering slowly to a rounded shoulder, where it is attached to a round knob, hollowed on one side, thickened on the other, pierced with a hole; there is another hole in the top of the bell, just below the hollowed part of the knob. A hand-modeled striking ball is attached, with a thin piece of jute string, knotted through the top hole and lowered through the bottom hole.
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface.
47.6.4 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in centre.
47.6.5 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in the centre.
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside.
48.12.1 Deep bowl; almost vertical sides; two rounded handles progress straight upwards from the middle of the body; slight groove before small foot; concave base
48.12.3 Tall, slightly out turned rim; small rounded horizontal handles at the beginning of the body, rising upwards, fairly deep body; thick conical footring; conical underside.
48.12.4 Broad, flat rim; short neck the length of which runs the handle with a hole for suspension; inverted oviod body; rounded base.
48.12.9 Projecting rounded rim with a lip that is flat on the upper surface; ribbed vertical strap handle extending 1/3 down the length of the vessel; slender neck widening to a cucumber shaped body. Flat concave base, the underside of which is outlined with a groove.
48.5.3 Tall jug with rounded rim, cylindrical neck, piriform body, and high arching loop handle that rises from the rim.
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body.
49.8.10 Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
49.8.4 Flat-bottomed aryballos. Broad, flat rim; tall thin neck; vertical strap handle; rounded body; small footring; slightly convex base.
50.10.1 Coldstream (79) classes this amphora as part of the 'plump and ungainly group' of LG IIb amphorae whose potters modelled amphora bodies after those of pitchers (see J.M. Cook, BSA 42, 151). Flaring mouth with rounded, thickened rim; two vertical strap thick handles extend from the top of the decorative zone on the neck down to the bottom of the decorative zone on the shoulder; rounded body tapers to a ring foot. Flat underside
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side.
50.10.5 Incurving, rounded on the top rim; fairly deep bowl curves into thick low stem; two tiny grooves at join of stem and base; broad, flat foot; conical underside.
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside.
50.4.13 Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove.
50.4.14 Gill classes it as a kantharos of the 'Ampurias class'. Sessile kantharos with low handles. Sparkes 1968, 9, notes that the sessile kantharos with low handles is the most practical, albeit least elegant, of the fifth century kantharoi. Slightly outturned, rounded rim; tall, flaring wall, offset from shallow rounded bowl, divided from moulded ring foot by groove. Two vertical strap handles loop down from rim down to just above junction of wall and bowl.
50.4.16 Plain, rounded, thickened rim; shallow cup; ridge at junction of bowl and stem; tall stem curving continuously to the upper surface of the foot, which has a slightly concave outer surface, and rises to a small underside. Classed by Gill as a 'plain rim' type; he further notes 'Acrocup type foot and fillet'.
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior).
50.4.23 Circular deep body with a small convex shoulder. Discus is concave with a small filing hole off centre and a small protruding nodule also off centre; this is probably the remains of a suspension lug. Long flat nozzle with a rounded tip and a large wick hole off centre at the end. Base is flat and demarcated with a line.
50.4.6 Flaring mouth with rounded rim on the top. Circular vertical handle rising over the rim, connecting the rim and the shoulder.
50.4.9 Trefoil lipped; rounded handle curves up from the rim to the upper part of the body; short neck curves sharply into shoulder and bulbous body; small footring; flat underside.
50.5.1 Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised.
50.5.3 Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot. Base convex underneath.
51.1.1 Flat outturned rim with rounded lip, sharply curving to nearly cylindrical bowl, slightly concave, which broadens and then tapers in the convex lower part to a disk foot, sloping on the upper part, rounded on the lower part, tapered on the interior, with flat resting surface and nearly flat underside. Just below the rim on one side are two holes for suspension.
51.1.3 Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base.
51.1.4 Slightly everted lip with rounded rim, on a deep plate that is convex at the upper part and then curves, with a near carination to become concave in the lower part, on a flat base that is beveled on the outer part. A single suspension hole is on the lip.
51.4.10 Thin, out-turned rim; rounded body; rounded handles curving upwards; flat bottom; tiny base
51.4.8 The rim is slightly flared and the neck is short; a strap vertical handle curves down from the rim to the shoulder; two smaller, round, horizontal handles protrude from the upper side of the rounded and pear shaped body; the foot is small and flaring; the base is convex
51.7.11 A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot.
51.7.12 Offset rim; origionally two handles of which only one remains, protruding horizontally from just below the rim; body initially rounded but then tapers fairly sharply to very narrow, raised footring; base flat
51.7.2 Lid: slightly convex top with circular groove (1.9 cm diam.) at the centre, overhanging a cylindrical body, with straight sides, terminating in a rounded rim at bottom. Pyxis: high cylindrical body with straight sides and simple rounded rim sits atop a flanged element, with rounded edges, that slopes sharply to a foot ring with tapered interior edge and rounded resting surface.
51.7.3 Flaring lip with rounded rim, sharply joined to ovoid body; single round, curved vertical handle rises up from alongside the lip and rejoins at the shoulder; lower part of body sharply joins to a short, flaring foot, concave on the underside, with a pointed underside.
51.7.7 Sessile kantharos, traditionally thought to be an imitation of the 'Saint-Valentin' class of ceramics (Beazley 1947, 219), although Robinson 1997 now says that it is derived from a metallic prototype. Quite standard among its class (Xenon Group kantharoi) in shape (and decoration). Rounded outturned rim, below which are attached two vertical strap handles, rejoined at a slight ledge between upper body and lower body; upper body near cylindrical, whereas lower body is a deep bowl; low flaring ring-foot, ridged on the exterior, with concave face on the interior continuously curving through the resting surface.
52.3.2 Flat rim; tall mouth sloping in towards thin neck; handle curves up from top of neck, then down to body; groove separates rounded body from flat foot
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side).
53.8.1 Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around.
53.8.2 Rounded rim; steep angled wall; slightly sloping floor continuously curving to the stemmed foot with a high trumpet-shaped base below moulding. Offset on interior at join of wall and floor. Base mostly flat but conical at the centre. Cf. Toronto, Royal Ontario Museum 918.3.72: Hayes 1984, 100 no. C67 (ill.)
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
55.1.1 Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body.
56.8.5 Conical, almost acorn shaped knob sits on rounded ring; lid curves down to a ridge; broad, flat edge
56.8.6 Rounded cup with sharply incurving rim and shallow bowl, on a short hollow stem which broadens to a disk foot with a grooved foot, and deeply concave underside.
58.2.1 Rounded mouth with downturned rim; thin neck curves continuously into rounded body; small foot with vertical sides.
58.2.2 Sloping rim; thin neck; inverted pear-shaped body tapering to a small rounded foot.
58.2.4 Wide rim with bevelled lip. Long wide neck leading to a short and rounded body, base protrudes from body but has been damaged (during firing process ?). The handle attaches to the top of the body and then again at the join of the rim and the neck. There is a fork shaped spur which follows the curve of the handle and rim and then continues above the main body of the jug.
60.1.2 Pagenstecher lekythos. (Restored rim); thin neck from the middle of which handle protrudes horizontally before sloping down to rounded body; broad foot; concave underside
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove.
60.8.1 Cup of Ionian type. Tall, slightly outturned rim; ridge between rim and deep body; two small, rounded handles emerge horizontally from the top of the body; conical footring; concave base.
60.8.2 Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section.
61.6.1.8 Ovaloid jug with a small mouth, a long neck flaring to a large body, and tapering again to a small, plain base; fat, rounded handle.
61.6.1.9 Deep; rounded groove between body and broad foot
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim.
61.6.4 Deep skyphos with thickened round rim, groove just below, straight walls of unusually deep body that narrows, with a sharp cuve at the bottom, to a short concave stem, and a thick disk foot, rounded on the exterior and angled on the interior, with a flat resting surface and a slightly concave underside. Two u-shaped handles, round in cross section, rise from the upper part of the body to the height of the rim.
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim.
62.10.1 Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim.
62.5.1 FS (='Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round handle, slightly concave sides that taper sharply below the handle to a raised base that is slightly concave on the underside.
64.7.1 Stemless (of a late type). Thin inturned rim; shallow bowl; one remaining rounded handle curves up slightly higher than the rim from just below the rim; round footring; flat underside with slight moulded circle on base.
68.12.2 Short cylindrical knob, flat-topped and double-recessed in centre. The short concave stem connects the cylinder to the short domed lid, in a continuous curve. Beyond a gouge the outer 1.8 cm of the lid becomes slightly concave and after two ridges terminates in a slightly rounded edge.The underside is hollowed just below the knob, and has a short flange intended to sits inside the rim of the pyxis to which it would have belonged.
68.12.3 Pomegranate shaped knob, with small hole in the recess at the top, smoothly attached to a short stem, slightly concave, that spreads to a short domed lid, which in turn spreads to a flat rim with sharp beveled edge, slightly thicker underside, smoothly turned to a tapered flange with a rounded edge. Hollowed, round, smooth underside.
70.3.2 Slightly everted rounded rim.
70.3.3 Ian McPhee describes it as a Kotyle rather than Skyphos type c (?). Tapering ring base, rounded at the bottom, from which the body rises in a sharp diagonal, curving sharply approximately at the halfway point, from which it rises near vertically and eventually flares slightly to a plain, rounded rim, just below which are attached two horse-shoe shaped handles, almost round in cross section.
71.12.1 Ovaloid shape. Slightly deep rounded mouth. Strap handle connecting the neck to the shoulder.
71.6.3 Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot
78.12.1 Deep circular body, almost flat shoulder, leading to a deep concave discus with two small holes, the frontal one is slightly off centre. Very small rounded nozzle with a large circular wick hole. Vertical handle opposite the nozzle, flat base with no delineation.
78.12.10 Circular body, flat moulded shoulder, small concave discus with a small filling in the front right hand side of the discus. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder, circular piercing through handle. Circular unmarked base, slightly concave.
78.12.11 Circular body, flat moulded shoulder, small concave discus with a small off center filling hole. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder. Circular delineated base, slightly concave.
78.12.12 Shallow circular body with large concave discus, filling hole is small and off centre on the discus. Medium nozzle has concave sided with a rounded tip, wick hole is circular and central at the end of the nozzle. Base is flat and delineated
78.12.13 Deep circular body , concave discus with a central filling hole. Medium, flat nozzle with concave sides, a splayed, rounded tip, large circular wick hole, just off centre. Flat circular delineated base.
78.12.14 Circular body with a gradual concave discus with a filling hole in the centre. Flat medium nozzle with concave sides and a rounded tip with a large circular wick hole in the centre. Small circular, unmarked base, very slightly concave.
78.12.15 Circular shallow body , small shoulder, concave discus with a small filling hole in the centre. Medium flat nozzle with concave sides and a rounded tip with circular wick hole in the centre. Circular delineated base, very slightly concave.
78.12.16 Deep circular body with a rounded shoulder terminating in a large filling hole. Long rounded nozzle titling slightly upwards, irregular rounded tip and an oval wick hole. Large splayed foot. Small vertical lug on the right hand side.
78.12.19 Shallow ovoid body, convex shoulder with a small depressed discus; three small holes in the discus. Nozzle is joined into the body shape and has a rounded tip with a medium oval wick hole. Small vertical handle opposite the nozzle. Base is unmarked but slightly concave.
78.12.20 Circular body, concave discus with a mall circular filling hole in the front, right portion of the discus. Long flat nozzle, rounded tip with small circular which hole. Base is defined by a single band and is slightly concave.
78.12.21 Shallow circular body , small convex shoulder, concave discus with a small filling hole in the centre. Flat nozzle with concave sides, rounded tip and circular wick hole. Circular delineated base, slightly concave.
78.12.22 Circular body, short flat spout with circular wick hole and rounded tip. Slightly sunken discus with filling hole on the same axis as the wick hole, but not in the centre of the discus. Demarcated base, slightly concave.
78.12.3 Circular body, small rounded nozzle with an oval wick hole, Small filing hole on the central axis but not in the centre of the discus. Small single volutes, concave moulded discus. Vertical handle with hole through. No foot, slightly concave base.
78.12.4 Shallow circular body (back deeper than the front), small convex shoulder, concave discus with a very small filling hole in the centre. Nozzle is flat with concave sides , a rounded tip and a circular wick hole that is just off centre. Base is demarcated and slightly concave.
78.12.5 Shallow circular body, slight shoulder leading to a large concave discus with a filling hole on the central axis, but further forward. Medium nozzle with concave sides leading to a rounded tip with a circular wick hole. Delineated base, slightly concave. Vertical band around the edge of the whole lamp, probably from joining.
78.12.6 Shallow circular body with slightly concave discus with small circular filling hole and a shallow circular base. Short flat nozzle with concave sides and a rounded tip, large circular wick hole.
78.12.7 Shallow circular body, small shoulder with concave discus with a small filling hole just off the centre of the discus. Medium nozzle, flat with concave sides, rounded tip and central circular wick hole. Base is unmarked, circular and slightly concave. Right hand stands slightly taller than the left.
78.12.8 Circular body, small convex shoulder with a slightly concave discus, two small holes on the discus, one on the central axis, the other just slightly off to the left. The nozzle is small and flat with a rounded tip and a circular wick hole, just off centre. Vertical handle extending towards the base at the back with a small hole though the centre. Demarcated base is flat except for a small depression.
78.12.9 Large, deep, circular body, small convex shoulder, concave discus with a small filling hole at the center. Medium flat nozzle (broken) concave sides with a small air hole at the base of the nozzle, the start of a rounded tip with a circular wick hole. Space for handle. Circular flat delineated base.
78.7.1 Deep skyphos; two rounded, horizontal handles emerging from just below the rim; tall, rounded foot
79.1.10 Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle.
79.1.11 Spreading circular body with long flat nozzle and large oval wick hole and rounded tip. Slight anomaly on the underside of the nozzle. Handle is missing. Flat base with no foot, wheel marks.
79.1.12 Circular shallow body, concave discus with a small circular filling hole in the center. Small demarcated base, slightly concave. Long nozzle with concave sides and a rounded tip with a circular wick hole in the center of the tip. Two lines run down either side of the nozzle at the termination of volutes.
79.1.13 Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot.
79.1.14 large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
79.1.16 Mainly circular body, nozzle is moulded with body disturbing the circular edge back half of body is deeper than the front. Shoulders are convex, discus is concave with a small circular filling hole in the centre. Long deep nozzle, sides follow smoothly on from the body, elongating the circular shape, slightly concave top marked with a ridge on either side, rounded tip and slightly irregular circular wick hole. Remains of small vertical handle attached to the shoulder. Small circular base, slightly concave not lineated.
79.1.2 Deep circular body with a large circular filling hole in the centre of the discus. Flat long nozzle with a small circular wick hole and a rounded tip. Circular raised foot, slightly concave with a ring in the middle. "Kick" on the inside at the bottom of the reservoir.
79.1.6 Circular body with slightly convex shoulder and a slightly concave discus, two holes of differing size are in the discus. The nozzle is small and rounded with an oval wick hole just off center. Vertical handle which reaches to the base which is demarcated with two concentric circles.
79.1.7 Shallow circular body. Flat nozzle with concave sides, large round wick hole and a rounded tip. Concave discus and wide ring base. Small filling hole, just off centre probably due to decoration.
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
81.9.1 Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder.
85.3.1 High, vertical sided neck joins sharply at shoulder with bulbous body; two-stepped base, bottom step rounded; concave base.
E.23.21 Rounded base and pronounced lip
E.23.24 Squat jar with rounded everted lip, short neck, and rounded base.
E.47.6.9 Undulating pie-crust mouth (probably hand molded). The body is globular and the base is rounded, with a small part flattened. The base presents the finger marks of the potter. It seems to have been suspended by a string around the neck (attached).
E.62.19 Hammer shaped handle with a slit where the mirror sat in the top. The top parts are curved over. The handle is rounded and wider at the end.
E.62.25 Long-necked vase, with fluted mouth and pronounced lip. Rounded body and base.
E.62.42 Long and thin, with rounded ends and flat base.
E.65.1 Wide flaring lip with rounded rim, narrowing to a short neck, broadening to an ovoid body, with a pointed base.
E.65.5 Almost circular, underside rounded, surface smooth and very slightly convex.
L.2011.1.13 Central circular knob, with a round tip and a sort of carination in the edge, hollow in the underneath; rounded rim, hollow inside, connected to the knob by a quite sloping lid.
L.2011.1.38 Front fragment of a lamp, with part of the central discus with filling-hole, part of the shoulders and nozzle. General shape rounded.
L.2011.1.50 Fragment of body of a vessel, with a part of rim, rounded. On the lower part, the body slightly narrows, with a slight carination. Fragment of a big open vessel.
L.2016.3.10 Miniature dimension. Round, outwards bulged ceramic disc, with very slightly everted, rounded rim and a moulded face at centre of the exterior. A small curved handle, running in a straight line, is attached to the rim and ends at the back side of the left forehead area and the right chin area.
L.2016.3.16 Characteristic wedge-shaped lithic flake with one short and two long sides, linked with a rounded edge. Triangular elevated dorsal surface and flat ventral surface.
L.2016.3.18 Trapezoid axe shape, with two concave long sides and thin, slightly rounded serrated blade. Tetragonal dorsal surface and flat, slightly concave ventral surface.
L.2016.3.19 Elongated microblade, serrated on one side and slightly rounded edge in section of bulbus. Triangular elevated dorsal surface and flat ventral surface.
L.2016.3.21 Microlith tool, with flat ventral surface and two dorsal-grates on surface, one rounded and one straight. The short sides are serrated, the long sides are slightly rounded cut off (one uneven and convex, the other concave).
L.2016.3.31 Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
L.2016.3.32 Small, relatively heavy metal horn; hollow inside. Moulded bulges line up along the curved body, probably to sketch the natural form, and lead to the rounded tip. Four holes surround the upper part of the horn (actually the end attached to the head). The horn ends with a flat rim.
L.2016.3.7 Heavy Alabaster lid with slightly uneven rounded knob, which leads to a short stem. The stem curves into the diagonal lid with rounded rim and short, broad flange, slightly narrowing to its bottom. The underside is concave at centre.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip.
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside.
REDMG:1934.51.8 Nearly conical shallow bowl, with a slightly incurving rounded rim, slightly convex side walls, and a thick, small foot, with straight sides on the exterior, tapered on the interior; pointed underside. For shape cf. CVA France 6 (Ensenere) pl. 22 and Lamboglia (Atti di I congr. Intrem di Studi Liguri (1950) 39, forma 26.
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside.
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre.
REDMG:1935.87.29 Stemless. Two handles, one either side from well below the rim are bent up at the ends. Shallow body descending to a groove and then a rounded footring.
REDMG:1935.87.6 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
REDMG:1942.5.6.1 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder.
REDMG:1950.25.1 Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim.
REDMG:1951.113.3 Rounded rim, slightly incurving, below which are attached two nearly triangular horizontal strap handles and ring base, canted slightly up; rounded body broadens slightly and then narrows to an angled ring foot, curved on the resting surface, and offset from the slightly convex underside. Body broader than standard Apulian shape, so that it can't fit easily into the sequence of Gnathian skyphoi.
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209).
REDMG:1951.133.1 Shallow ellipsoid bowl with rounded rim, underneath which are attached two horizontal round sections, curving up above the rim, rectangular in shape, and bent in at the tops. Deep angled ring foot, with a narrow, rounded resting surface, convex on the interior vertical surface, and flat on the underside.
REDMG:1951.134.1 Plain rounded rim, body nearly vertical at top and curving into a deep bowl, which narrows to a short stem attached to a disk foot with a rounded resting surface, small underside pointed at centre. Two horseshoe-shaped horizontal round handles, attached slightly below the rim.
REDMG:1951.135.1-2 Pyxis: Flanged rim widening to sharply curved shoulder, rounded below, and tapering to a flat base; round horizontal handles on either side pressed up against rim to form lugs. Lid: cylindrical knob attached to a disk.
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim.
REDMG:1951.138.1 Moulded rounded (‘mushroom’) knob, topped by beveled disk with inset circle, conical indentation on upper surface, surrounded by a groove; cylindrical stem offset from a to a slightly diagonal lid, with a moulded flange on the underside, concave at centre.
REDMG:1951.139.1 Moulded knob, topped by a slightly rounded element with inset circle and conical indentation, on upper surface; lower part of knob curves into a nearly cylindrical stem offset from a diagonal lid, with a tapered lip, with a plain rim.
REDMG:1951.141 Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
REDMG:1951.142.1 Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside.
REDMG:1951.147.1 Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
REDMG:1951.151.1 According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
REDMG:1951.153.1 Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail.
REDMG:1951.154 Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom.
REDMG:1951.155 Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base.
REDMG:1951.157.1 Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
REDMG:1951.161.1 Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body.
REDMG:1951.1707 Everted rounded rim, from the back of which extends a round vertical handle that reaches to the middle of the biconical body with a flat, rough base.
REDMG:1951.1708 Everted rounded rim, from the back of which rises a round vertical handle that joins the body at the middle of the slightly baggy body with a flat, rough base.
REDMG:1951.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1951.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior.
REDMG:1951.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior.
REDMG:1951.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior.
REDMG:1951.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior.
REDMG:1953.25.14 Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
REDMG:1953.25.16 Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group
REDMG:1953.25.2 Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band.
REDMG:1953.25.26 Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside.
REDMG:1953.25.27 Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap handle rises from the top of the neck and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside.
REDMG:1953.25.32 Kalathos-shaped body, with a flaring rounded rim, to the top of which are attached the looped ends of a pair of strap handles, concave on their exterior surfaces; the tubular ends of the loops rejoin the middle of each handle, and below the bottom of each handle, attached at the bottom of the cup, is a spur. Below a carination, the bottom of the cup narrows to a nearly cylindrical stem, ridged at the center, below which it widens, and smoothly curves into the top of a moulded foot, with three ridges, of increasing diameter, on the exterior surface. Within the narrow resting surface is a concave underside, with a conical hollow at centre.
REDMG:1953.25.34 The vessel presents a rounded belly with a very narrow neck, which ends in a flat rim with a inner lip that would prevent the liquid from falling.
REDMG:1953.25.35 Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder.
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim.
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface
REDMG:1953.25.40 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface.
REDMG:1953.25.43 Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
REDMG:1953.25.44 Flaring rim, with concave profile, joining bulging body at a carination, below which are attached two u-shaped horizontal handles, rounded in section, canted slightly up; below handles body curves sharply towards stem, broken off.
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.49 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.25.55 Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted).
REDMG:1953.25.57 Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
REDMG:1953.25.59 Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.60 Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
REDMG:1953.25.66 Two thin vertical strap handles arch up from the top of a cylindrical neck, slightly offset at the bottom, and rejoin at the middle of a sloping shoulder; shoulder curves sharply into a conical body, slightly rounded at the bottom where it joins a short stem flaring to a disk foot, hollowed at the bottom.
REDMG:1953.25.67 Nearly flat lid, with rounded rim, curving into a deep thin flange, whereby lid would have sat probably within the pyxis; button knob at centre.
REDMG:1953.25.68 Sloping lid above slightly tapered flange with a rounded rim; flat-topped knob, with sloping sides, at centre.
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim.
REDMG:1953.25.75 Incurving rounded rim; interior surface curves smoothly; exterior upper part offset from a lower concave element, curving out at the bottom to flat base, marked by a ridge on the exterior; nipple surrounded by a grooved circle at centre of underside.
REDMG:1953.25.79 Small Circular body, convex shoulder, rim of large central filling hole is concave. Large slightly raised nozzle, rounded tip with a large oval wick hole, slightly irregular underside to nozzle. Small straight sided circular foot with a flat base. Slight anomaly at the bottom of the reservoir in the centre.
REDMG:1953.25.9 Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem.
REDMG:1958.113.1 Ovoid aryballos, with a rounded mouth (now broken), small round vertical handle reaching from just below the mouth to the bottom of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, bossed on the underside.
REDMG:1958.117.1 Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination.
REDMG:1958.16.1 Bowl with rounded body and no base. Wishbone handle and inward rim.
REDMG:1958.23.1 Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
REDMG:1961.150.1 Spreading lip, flat, with rounded rim, above tall, cylindrical neck, with ridge at center, just above attachment of l-shaped strap-handle, joining at centre of shoulder; squat piriform body, nearly flat base, ridge at exterior, groove just within.
REDMG:1961.150.2 Slightly flaring body with a rounded base. Tall narrow neck and beak spout. Base is uneven and therefore the vessel leans to one side.
REDMG:1961.150.3 Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided.
REDMG:1961.199.3 Continuously curving sides: flaring rim, rounded on the upper surface, broad cylindrical neck, nearly diagonal shoulders, ovoid body narrowing to a pinched stem, flaring base, flat (although rough and thus unstable) on the underside.
REDMG:1961.199.4 Cylindrical neck, narrowing (pinched) towards the body, piriform body, tapering more gently below, rounded above the flat base.
REDMG:1964.1154.1 Outturned rounded rim , narrowing to a nearly cylindrical body (broadens slightly below) that narrows sharply to a short, nearly cylindrical stem, attached to a pedestal foot, hollow within, slightly angled on the upper surface, nearly vertical on the sides, flaring to a slighted everted base, with a rounded resting surface
REDMG:1964.1605.1 Small Circular body, convex shoulder, rim of large central filling hole is concave. Large flat nozzle, rounded tip with a large oval wick hole. Small slightly splayed circular foot. Slight anomaly at the bottom of the reservoir.
REDMG:1964.1608.1 Small circular body, convex shoulder, concave rim leading to a large circular, central filling hole. Flat long nozzle with slightly down-turned oval wick hole and a rounded tip. Small circular strait sided foot with flat base.
REDMG:1964.1609.1 Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
REDMG:1964.1610.1 Ovoid body, convex shoulder, medium rounded filling hole in the centre at the highest point. Nozzle is part of the body and is the most acute angle, elongated oval wick hole piercing the body. Irregular flat lateral pinched handle, base is a slightly raised ring mirroring the ovoid shape of the body.
REDMG:1964.1611.1 Circular body with convex shoulder and small concave discus (filling hole is destroyed). Small deep nozzle rounded tip and sides, medium size circular wick hole. Small vertical handle with piercing, attached to the shoulder and to the body, extending towards the base. Single ring base.
REDMG:1964.1613.1 Circular shallow body with rounded convex shoulder leading to a concave discus with two small filling/air holes along a central axis. Nozzle is of an average length with a rounded wick hole. large un-pierced pinched vertical handle, small circular, slightly concave demarcated base.
REDMG:1964.1614.1 Deep circular body, nearly straight convex shoulder and a deep concave discus with a small filling hole at the centre. Nozzle was flat and had a small round wick hole and probably a rounded tip. high vertical handle reaching down towards the base, circular piercing through the handle. Circular base is demarcated with a single line and is very slightly concave.
REDMG:1964.1615.1 Circular deep body, convex shoulder, small circular concave discus with reasonably large central filling hole. Small rounded nozzle with a medium sized flat, circular wick hole, at base of nozzle there appears to be a small air hole. Flat vertical handle with circular piercing through it. Handle is high above the body and reaches down towards the base. Base is circular and flat, it is delineated by two moulded bands.
REDMG:1964.1616.1 Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
REDMG:1964.1617.1 Circular shallow body, concave shoulder with large circular filling hole. Flat, slightly upward tilting nozzle narrowing towards the rounded tip; large oval wick hole. Beginnings of a band handle. Base not outlined, very slightly concave.
REDMG:1964.1622 Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside.
REDMG:1964.1624 Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base.
REDMG:1964.1630 Very small kotyle, with rounded rim, convex sides tapering to a short disk foot, with a flat underside; two triangular round handles attached vertically, just below the rim and rising slightly, just above the height of the body.
REDMG:1964.1631 Very thin walls, with rounded rim, just below which are attached horizontal handles. Walls slightly concave, divided from a spreading, lipped torus ring foot, with a pointed resting surface, by a pair of grooves. This example corresponds to Ure's Class II.C skyphos, particularly (ii) which includes reddish-purple bands just below the level of the handles, perhaps a band at the bottom of the body where it joins the ring foot, and concentric purple bands on the underside (or plain black or reserved undersides). See Ure 1927, 24.
REDMG:1964.1647 Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
REDMG:1964.1648 Projecting rim, with rounded lip and with slightly concave mouth, from which emerges a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap handle that curves down to the middle of the shoulder; globular body with a flat bottom.
REDMG:1964.1660 Thick rounded rim, slightly overhanging, above a baggy bowl that narrows sharply to a tapering, slightly concave pedestal foot, with a flat base. The interior of the bowl is concave at the centre. Some irregularities such as uneven edge of base.
REDMG:1964.1661 Everted rounded rim with flat upper surface, tapering to a narrow neck that broadens to a piriform body, conical in the lower part, on a tall, slightly flaring foot, with a flat resting surface and conical depression with a nipple at the center.
REDMG:1964.1663 Rounded, slightly raised rim; two pinched round horizontal handles, round in section, rise at a diagonal from the sloping shoulders which curve gently down to a small raised base, concave on the underside.
REDMG:1964.1669 Rounded everted rim; sides comprised of two concave parts, the upper one larger; flat base.
REDMG:1964.1670 Rounded everted rim; sides comprise two concave parts, the upper one larger; groove inside mouth, approximately 1.0 cm below rim; flat but uneven base with comb or wire marks.
REDMG:1964.1671 Rounded everted rim; sides divided into two concave parts, the upper one larger; flat base with comb or wire marks.
REDMG:1964.1672 Rounded everted and very uneven rim; sides comprise two concave parts, the upper one larger; flat base with comb or wire marks.
REDMG:1964.1673 Rounded everted rim tapering to nearly cylindrical sides; flat base.
REDMG:1964.1675.1 Rounded rim surrounded by a slight ridge from which rises the shoulder of a squat ovoid body, tapering to a short angled ring base, concave on central part of underside. On interior of rim five evenly spaced notches are gouged into the inside of the mouth.
REDMG:1964.1677.1 Rounded rim, nearly flat sides taper to a flat base.
REDMG:1964.1678 Rounded, slightly outturned concave rim; two horizontal round handles, pi-shaped, applied to the outside of the rim, with tops pressed down across the top; shallow bowl; flat base with wire comb or wire marks.
REDMG:1964.1691 Rounded sides that serve as rim, with flat sunken surface at centre; concave on underside.
REDMG:1964.1699.1 Everted rounded rim which tapers to a short neck and then broadens to a body with nearly vertical sides, slightly tapering to a flat base; round vertical handle, twisted, extends from the rim to the shoulder.
REDMG:1964.1707.1 Everted thickened and rounded rim, from the back of which extends a round vertical handle that joins the body at the middle of the biconical body with a flat, rough base.
REDMG:1964.1710.1 Probably had a wishbone handle. Typical Late Cypriot I shape. Rounded base.
REDMG:1964.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1964.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior.
REDMG:1964.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior.
REDMG:1964.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior.
REDMG:1964.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior.
REDMG:1997.209.2 Bulbous vase, with rounded outturned rim, a tall cylindrical neck tapering down and then broadening to a baggy body with a narrow, flat base. Striations on the exterior indicate where the vase was scraped by the pottery during creation.
REDMG:1997.209.3 Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
REDMG:1998.153.4 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks.
REDMG:2003.92.1 Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem.
REDMG:2004.97.1 Plain rounded rim; tapering walls, slightly concave, broaden slightly at the bottom of the bowl, which is moulded with two carinations; diagonal profile to bottom of bowl; tall cylindrical stem, slightly bulging at the middle, curves out to a flat disk foot, with rounded sides, but an indeterminate bottom. Two vertical strap handles swing up from the rim and rejoin the vase at the lower carination, where they comprise a smooth curve with the bottom of the bowl.
TEMP.2005.1.7 Round but flattened body with a short, wide neck and flat, rounded base. Potentially once had a handle.
TEMP.2005.1.8 Rounded, flattened body with a short and wide neck. One side of the neck protrudes out further, indicating a handle?
TEMP.2012.11.29 rounded bowl
TEMP.2022.6.1 belly jar: ovoid body with a short neck and protunding edge, with a rounded base.
Temp.2022.7.1 it is a oinochoe (a jar used for cooking or for the storage of water or foods). Body rounded, domed to 1/3 of the height, short neck, the rim is circular and made to pour the liquid, small handle.
temp.2014.12.1 the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, a pouring spout and a bigger filling aperture; a single handle from the middle of the neck to the upper part of the body.
temp.2014.12.2 oinochoe with rounded body, circular mouth and flat base. Single handle from the mouth to the half-belly: small groove at the end of the neck.
temp.2022.6.1 belly jar, ovoid body with a short neck and protunding rime with a rounded base
temp.2022.7.1 it is a oinochoe (a jar used for cooking or for the storage of liquid or food). Body rounded, domed to 1/3 of the height, short neck, the rim is circular and made to pour the liquids; flat base and one small handle
temp.2022.7.2 narrow-necked ampoule, without handle, the neck is long and thin, rounded body and flat base.
temp.2022.7.3 the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, rounded neck to insert the oil, a pouring spout in the upper body to pour the olive oil; solid handle from the middle of the neck to the upper part of the body.
temp.2022.7.4 terracotta jug with rounded body, flat base and large neck; the handle is from the upper part of the neck to the upper part of the body, between the neck and the body there is a groove. There are seven fragment of the neck inside the jar.
temp.2022.7.5 amphora with rounded body, wider in the upper part; flat base, two symmetrical handles, the neck is smaller than the body and is partially broken; there is a groove between the neck and the body
temp.2022.7.6 wine jug with rounded body, wider at the middle of the body, with flat base and one handle from the upper part of the neck to the upper part of the body; there is a groove which divides the body from the neck; the rim of the neck is circular and made to pour the liquid
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH