Ure Museum Database



Browse
There are 145 objects for which Shape_description contains → ring
11.10.15 With vertical ring handles. The whole of the body fluted horizontally. Side of foot ridged; underside concave with a narrow flat resting surface and a slight projection in the centre.
11.10.16 Miniature. Open mouth with slightly flared rim. Body with a wide neck, three grooves on lower body, two grooves on foot ring base conical with flat resting surface.
11.10.21 If the foot is restored correctly this is a variant of Ure's type K 2 (Ure 1927, 68), which is the most common Haemonian skyphos, as judged by the Agora material: cf. Agora 23, 60, esp. no. 1516, pl. 103 (with the same type of foot); ABV 565-71, 598-710 Slightly concave black rim; shallow bowl with flat underside; moulded ring foot, with concave inner surface.
13.10.16 Rounded rim; deep bowl; two small ribbon handles on rim; thin ring foot.
13.10.21 Course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, then tapers inwards slightly to meet the body, the ring foot is short and quite wide.
13.10.22 Fat Body, narrow neck leading to an out turned rim. One handle joins the shoulder of the vase to the neck directly beneath the rim. Low ring foot.
14.9.106 Small bowl, 'later and light', according to Gill 1986; shallow bowl with incurving rim and torus ring foot with concave inner face
2005.2.4 Ring foot, sloping on the interior, torus profile on the exterior.
2016.3.2 Ovoid body with convex shoulders and wide central filling hole. Body tapers directly into the nozzle with rounded tip, ovoid wick hole at centre and convex sides. Flat ring foot on the base.
2022.7.8.a a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.b a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.c a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.d a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.e a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.f a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.g a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.h a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.i a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.l a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
2022.7.8.m a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
22.9.3 Cone shaped body. Vertical ring handles, ribbon. Broad duf-bottomed cap, spreading foot. Shallow depression inside in bottom (cf. CVA pl.19.1,2).
26.12.31 Mouth flanged and bottom of body angular. Vertical ring handles, spurred. Bottom of vase somewhat angular. Finely moulded foot, side grooved, underside concial with resting surface.
26.2.3 Body sherd of Corinthian black-figured pottery ring aryballos; very worn;
26.2.37 Fragment of floor of North Ionian Late Wild Goat Style pottery plate with part of ring foot;
29.11.2 Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center. Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments').
29.11.6 Two u-shaped horizontal handles placed slightly above the lip, slightly angled upwards. Deep body descending to a groove above the ring base.
34.10.7 Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim.
34.8.15A Doughnut shaped ring stand with hole in the middle for small vase (34.8.15B)to rest on.
34.8.2 it is a small lekythos with a ring flat foot, rounded body, tubular and thin neck, cup mouth with slightly concave upper surface, there is one handle from the upper part of the body to the lower part of the cup mouth
37.11.5 Straight sided, fairly deep, rimless bowl; two horseshoe-shaped horizontal handles attached just below the thin rim; thin groove before base. Flaring ring foot.
37.7.4 Vertical ring handles, spurred, starting directly from rim. Moulded foot which is concave underneath with grooved resting surface.
39.1.1 Vertical ring handles, spurred, start directly from rim and finish at the moulded rim around the body, and tilt slightly upwards. Moulded foot, all black, conical inside with narrow, slightly concave, resting surface.
45.10.1 High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
45.10.7A-B Tripodic pyxis (three-legs) with a lid, of cylindrical shape. There is a flat, disc-shaped, plastic ring that joins the body with the feet.
45.6.26 Shallow with incurved rim, round body on a high stem and a ring in centre of stem. Convex foot with a central groove and flat resting surface except for central concave circle.
45.6.37 Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot.
45.6.66 Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences.
47.2.1 Type B, formerly known as 'Glaux'. Rounded, incurved rim, below which are two round handles, one horizontal and one vertical; tall bulbous body tapering towards torus ring foot.
47.2.12 Rounded, slightly incurved rim; shallow convex upper wall divided by a reserved groove from a sharply concave wall that runs continuously down to the foot, although only a single curve is perceived on the interior. Short torus ring foot, with a narrow reserved resting surface and a reserved medallion at the centre of the underside, circumscribed by a concentric ridge. Convex-concave profile.
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface.
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot.
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside.
47.2.8 Thickened, slightly everted rim, surmounts a wide shallow bowl; ring torus foot.
47.2.9 Small bowl, 'later and light', according to Gill. Cf. Reading 14.9.106 Shallow bowl with incurving rim, concave on inner face, torus ring foot, circular ridge in middle of underside before convex centre.
47.6.2A-B Powder pyxis (with slip-on lid); for another Sam Wide powder pyxis see London, British Museum E 814 (from Tanagra), showing Herakles at the fountain.T he lid is cylindrical with a plastic ring on the top. The body is conical and the base is a broad, disk-shaped, flat ring.
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside.
48.12.2 Deep bowl (corresponds to FS [='Furumark Shape'] 285). The shape seems somewhat less deep than most published deep bowls. The best comparison to be found is in Mountjoy 1999, 1.189 Argolid no. 447, from Asine, House I, room 46. Bowl of pinkish fabric with flaring lipless rim, concave sides, tapering in lower part to a high ring base (is it conical?). Two horizontal round handles are attached to the side walls.
48.5.1 Three knuckle-bone shaped handles with holes for suspension(?)Small ring foot.
49.8.10 Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
49.8.2 The two-stepped handle has its upper part in the shape of echinus, while the lower part is a smaller, plastic ring. The body is conical and the rim is incurving.
49.8.5 Broad, flat rim; short strap handle; body shaped rather like a bombylios, with moulded rings; small ring foot; concave base.
50.10.1 Coldstream (79) classes this amphora as part of the 'plump and ungainly group' of LG IIb amphorae whose potters modelled amphora bodies after those of pitchers (see J.M. Cook, BSA 42, 151). Flaring mouth with rounded, thickened rim; two vertical strap thick handles extend from the top of the decorative zone on the neck down to the bottom of the decorative zone on the shoulder; rounded body tapers to a ring foot. Flat underside
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side.
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside.
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
50.4.13 Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove.
50.4.14 Gill classes it as a kantharos of the 'Ampurias class'. Sessile kantharos with low handles. Sparkes 1968, 9, notes that the sessile kantharos with low handles is the most practical, albeit least elegant, of the fifth century kantharoi. Slightly outturned, rounded rim; tall, flaring wall, offset from shallow rounded bowl, divided from moulded ring foot by groove. Two vertical strap handles loop down from rim down to just above junction of wall and bowl.
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior).
50.4.24 Shallow circular body with convex shoulder and a small concave discus; small filling hole at centre. Nozzle is short and has a flat surface at the tip into which a wick hole has been made, slightly off centre. Small vertical ring handle at the back of the lamp. Base is demarcated but flat.
50.5.1 Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised.
50.5.3 Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot. Base convex underneath.
51.7.15 A small mouth, with flaring lip, on a short concave stem, is joined smoothly to a ring aryballos, rectangular in section, approximating a sharp-edged donut, with beveled edges on the inside. A short strap handle rises slightly from the rim and curves smoothly to adhere to the exterior surface of the aryballos. Ure 57: 'Rectangular in section, as is normal in Boeotia'; cf. P.N. Ure, Hesperia 15 (1946) 45-50. Small mouth and handle. Angular shape with side and edge flat
51.7.2 Lid: slightly convex top with circular groove (1.9 cm diam.) at the centre, overhanging a cylindrical body, with straight sides, terminating in a rounded rim at bottom. Pyxis: high cylindrical body with straight sides and simple rounded rim sits atop a flanged element, with rounded edges, that slopes sharply to a foot ring with tapered interior edge and rounded resting surface.
51.7.5 Bell mouth, flaring at the rim, with a convex upper surface, offset from a narrow neck, broadening and curving sharply into the ovoid body; strap handle rises from the top of the neck and joins the lower part of the shoulder; molded ring base, divded into two concave parts, divied by a ridge at the middle; convex underside.
51.7.8 Cup mouth with slightly concave upper surface, tubular neck offset from mouth and shoulder; ridged vertical strap handle loops up from top of neck and descends directly to the shoulder; squat body; broad torus ring foot.
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
55.1.1 Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body.
56.8.4 Shape 1; trefoil-lip joining at the back to a high curving vertical strap handle, which joins at the shoulder; ring base.
56.8.5 Conical, almost acorn shaped knob sits on rounded ring; lid curves down to a ridge; broad, flat edge
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove.
60.1.4A-B Pyxis: inverted rim slightly hanging over bulbous body; small, ring torus foot above a slight groove; convex underside Lid: Gently slopes up to stem and donut shaped knob.
60.1.5 Bell-shaped mouth with high outturned rim and broad, slightly convex lip;long neck widens to shoulder with smooth contour to ovoid body; vertical strap handle rising from top of neck and rejoining at bottom of shoulder; short ring foot.
62.10.1 Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim.
70.3.3 Ian McPhee describes it as a Kotyle rather than Skyphos type c (?). Tapering ring base, rounded at the bottom, from which the body rises in a sharp diagonal, curving sharply approximately at the halfway point, from which it rises near vertically and eventually flares slightly to a plain, rounded rim, just below which are attached two horse-shoe shaped handles, almost round in cross section.
71.6.3 Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot
79.1.10 Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle.
79.1.13 Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot.
79.1.14 large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
79.1.18 Rough oval shape, very flat body with a flat discus and filling hole in the centre. There is no nozzle, just an elongation of the discus with a small circular wick hole. Circular ring base.
79.1.2 Deep circular body with a large circular filling hole in the centre of the discus. Flat long nozzle with a small circular wick hole and a rounded tip. Circular raised foot, slightly concave with a ring in the middle. "Kick" on the inside at the bottom of the reservoir.
79.1.7 Shallow circular body. Flat nozzle with concave sides, large round wick hole and a rounded tip. Concave discus and wide ring base. Small filling hole, just off centre probably due to decoration.
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
81.9.1 Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder.
83.9.16.b black painted plate, with little pronounced edge, low ring foot, shallow plate
E.23.40.1-4 Three pieces unattached but found together. The panels are very thin and the ring does not meet beneath them but is attached either side.
E.23.46 Lightweight hair ring comprised of a circle that is incomplete, to allow hair to be put into the ring. The top and bottom slope into the central hole and the body widens so there is a ridge around centre.
E.47.1 Circular body with small sunken discus with small filing hole, large raised sholder. Long flat nozzle with a splayed end and a curved tip and oval smoke hole. Small ring base.
E.62.40 Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall.
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside.
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside.
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre.
REDMG:1935.87.32 Column krater. The handles have two bars of a cylindrical cross-section and adjoin in a square at the rim, having side-surfaces above the bars. The foot is in the shape of an inverted echinus, a cylindrical stand widening towards the bottom. There is also a plastic ring just below the lowest part of the body.
REDMG:1942.5.6.2 Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
REDMG:1947.13.1 Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
REDMG:1950.25.1 Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim.
REDMG:1951.113.3 Rounded rim, slightly incurving, below which are attached two nearly triangular horizontal strap handles and ring base, canted slightly up; rounded body broadens slightly and then narrows to an angled ring foot, curved on the resting surface, and offset from the slightly convex underside. Body broader than standard Apulian shape, so that it can't fit easily into the sequence of Gnathian skyphoi.
REDMG:1951.130.1 Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface.
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209).
REDMG:1951.133.1 Shallow ellipsoid bowl with rounded rim, underneath which are attached two horizontal round sections, curving up above the rim, rectangular in shape, and bent in at the tops. Deep angled ring foot, with a narrow, rounded resting surface, convex on the interior vertical surface, and flat on the underside.
REDMG:1951.142.1 Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside.
REDMG:1951.143.1 Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside.
REDMG:1951.146 Plain rim, concave sides, high ring foot; two horizontal round handles, canted slightly up, just below rim.
REDMG:1951.147.1 Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
REDMG:1951.151.1 According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
REDMG:1951.157.1 Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
REDMG:1951.158.1 Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside.
REDMG:1951.159.1 Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
REDMG:1953.25.1 Type B, formerly known as 'glaux' variety. Slightly incurved rim, below which is attached a one side a round horseshoe-shaped handle, canted slightly up to the level of the rim, and on the other side a ridged strap handle that rejoins just above the middle of the body; convex side walls; torus ring foot with slightly convex underside.
REDMG:1953.25.103 Moulded female figurine with extended arms, wearing headdress. Flat, roughly worked back. Arm position suggests she may have been a singer, forming parts of a ring and is now broken from her base.
REDMG:1953.25.13 Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
REDMG:1953.25.14 Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.16 Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group
REDMG:1953.25.17 Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
REDMG:1953.25.20 Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
REDMG:1953.25.3 Plain rim, slightly concave on the interior, below which are two horizontal round handles; tapering wall; angled ring foot, with convex resting surface.
REDMG:1953.25.33 Central well, surrounded by a ridge and groove; walls rising to broad rim, just beyond a groove on the upper surface, with overhanging vertical lip, tapering slightly out; on the underside the plate is slightly convex and joins a short, thick, angled ring foot, with a tapering resting surface and a slightly convex, pointed underside.
REDMG:1953.25.36 Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim.
REDMG:1953.25.4 Plain rim, below which are attached two horizontal round handles; curved sides, nearly vertical at the top and tapering more sharply towards the angled ring foot. Shape corresponds to Corinth black-glazed skyphoi, group iii, although the pattern on this skyphos is quite different.
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.48 Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.5 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot with convex resting surface. Semi-glazed skyphos, type ii: see Corinth 13, 125 fig. 13
REDMG:1953.25.51 Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.25.65 Flaring broad lip with flat upper surface and a short rim curving into a cylindrical neck above a moulded ring, from which descends the conical body, narrowing slightly to a flat base, with a slightly bevelled edge.
REDMG:1953.25.77 Large circular, deep body, flat shoulder, slightly raised, concave discus with a small filling hole in the centre. the beginnings of two nozzles, both sided are concave with large decorative features protruding from either side. Base of handle remains with half of the hole left. Ring base, slightly concave.
REDMG:1953.25.9 Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
REDMG:1958.111.1 Slightly flaring cup mouth, with a slightly convex upper surface; strap handle (lopsided) rises from the top of the neck and rejoins at the middle of the shoulder; cylindrical neck, broadening at the bottom, offset from the globular body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
REDMG:1958.117.1 Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination.
REDMG:1961.150.3 Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided.
REDMG:1964.1610.1 Ovoid body, convex shoulder, medium rounded filling hole in the centre at the highest point. Nozzle is part of the body and is the most acute angle, elongated oval wick hole piercing the body. Irregular flat lateral pinched handle, base is a slightly raised ring mirroring the ovoid shape of the body.
REDMG:1964.1611.1 Circular body with convex shoulder and small concave discus (filling hole is destroyed). Small deep nozzle rounded tip and sides, medium size circular wick hole. Small vertical handle with piercing, attached to the shoulder and to the body, extending towards the base. Single ring base.
REDMG:1964.1619.1 Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base.
REDMG:1964.1620 Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled.
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41.
REDMG:1964.1628 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot, concave on underside, with circular protruberance.
REDMG:1964.1631 Very thin walls, with rounded rim, just below which are attached horizontal handles. Walls slightly concave, divided from a spreading, lipped torus ring foot, with a pointed resting surface, by a pair of grooves. This example corresponds to Ure's Class II.C skyphos, particularly (ii) which includes reddish-purple bands just below the level of the handles, perhaps a band at the bottom of the body where it joins the ring foot, and concentric purple bands on the underside (or plain black or reserved undersides). See Ure 1927, 24.
REDMG:1964.1675.1 Rounded rim surrounded by a slight ridge from which rises the shoulder of a squat ovoid body, tapering to a short angled ring base, concave on central part of underside. On interior of rim five evenly spaced notches are gouged into the inside of the mouth.
REDMG:2003.92.1 Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
REDMG:2003.93.1 Squat wide body that tapers towards a ring base. The body is flat and angled in places. Single-reliefed handle joins the long tapering neck near the thick rim and shoulder.
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH