| 11.10.16
|
Miniature. Open mouth with slightly flared rim. Body with a wide neck, three grooves on lower body, two grooves on foot ring base conical with flat resting surface.
|
|
| 13.10.10
|
Fragment. Neck and handle of vase.
|
|
| 13.10.12
|
Body almost cylindrical, pointed at bottom. Short neck, trefoil lip, handle that joins the shoulder an the lip.
|
|
| 13.10.13
|
Shallow bowl; wide neck with inward rim; flat wide base.
|
|
| 13.10.21
|
Course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, then tapers inwards slightly to meet the body, the ring foot is short and quite wide.
|
|
| 13.10.22
|
Fat Body, narrow neck leading to an out turned rim. One handle joins the shoulder of the vase to the neck directly beneath the rim. Low ring foot.
|
|
| 13.10.23
|
Elongated ovoid body, tapering at the bottom to a convex but nearly flat base and at the top, more gradually, to a very short neck with concave sides, then a broad rim, slightly concave on upper and lower sides, with a narrow mouth; two lugs (with wavy ridges), parallel to eachother, on either side of the vase, approximately 1/3 below the rim.
|
|
| 13.10.25
|
Broad, flat, rim; short neck; long body, widening towards base; almost conical base with small circular indentation in centre
|
|
| 13.10.33
|
Female head, broken at neck, with oval eyes, prominent ears and slight smile.
|
|
| 13.10.7
|
Flared rim; tall neck; two ear-lug handles protruding from base of neck in right-angle shape; almost spherical body and base
|
|
| 13.10.9
|
Slightly tapered body, straight neck, elongated lip.
|
|
| 14.9.2
|
Fat body, long bottle neck with spreading lip, large U-shaped handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.418 (with shorter foot and more relief decoration)
|
|
| 14.9.46
|
Fragment of stirrup jar consisting of handles and false neck.
|
|
| 14.9.58
|
Conical with narrower neck at one end and widening to a lip at the other like a miniature vase. End with lip slopes inwards to a raised central circle.
|
|
| 14.9.6
|
Tankard (?) or one-handled jug (?) fragment, preserving section of lip, neck and upper body.
|
|
| 14.9.76
|
Fragment; Body sherd of Clazomenian black-figured pottery neck amphora
|
|
| 14.9.77
|
Body sherd of Clazomenian black-figure pottery neck amphora;
|
|
| 2005.3.27
|
Fragment of lekythoi - part of neck, mouth and rim preserved
|
|
| 2005.6.1
|
Fragment; shoulder, neck and mouth section of aryballos
|
|
| 2006.12.109
|
Fragment of rim and neck of vessel
|
|
| 2006.12.15
|
Ridge inside fragment and change in decoration suggests fragment is from neck of vessel
|
|
| 2006.12.17
|
Fragment of rim with part of neck
|
|
| 2007.2.132
|
Fragment with a small lip, potentially the neck of a vessel.
|
|
| 2007.2.161
|
The shape suggests this is the neck of a vessel.
|
|
| 2007.2.73
|
Neck of a vessel.
|
|
| 2007.2.88
|
Neck of vessel
|
|
| 2007.4.202
|
Curved fragment with neck of vessel
|
|
| 2007.4.85
|
Curve of fragment suggests neck of vessel
|
|
| 2008.7.101
|
Part of neck, handle, shoulder, body
|
|
| 2008.7.132
|
Appears to be shoulder (neck) of pot. Lug protrudes from fragment with hole piercing it horizontally.
|
|
| 2008.7.36
|
Irregularly shaped rim fragment; from rim down to just past the join of neck and shoulder.
|
|
| 2008.7.54
|
Hexagonal fragment from possibly neck of a pot as the exterior top of the fragment curves out into what could be a lip; exterior base of fragment also begins to curve outwards; horizontal curvature to the fragment
|
|
| 2016.5.1
|
Projecting disc-shaped rim with rounded lip from which emerges a short tubular neck which curves into a globular body with a flat bottom. A narrow strap handle curves to the shoulder. The bottom of the vase has a small flat recess in the centre.
|
|
| 2016.5.3
|
Flaring mouth, wide elongated conical neck, separated from a large ovoid body by a moulded groove. Small round foot. Handle is missing.
|
|
| 2016.5.4
|
Ovoidal body with round base. The shoulders are carved with vestigial tiny lugs handles. Short neck. Half section of the neck is broken off.
|
|
| 2022.6.3
|
Mouth and neck and one handle of amphora
|
|
| 22.11.1
|
Globular body with spout to one side. In centre at top is a 'false' neck with a round covering (attached but meant to look like a false lid) attached to two handles which come down to shoulder, one either side. Very small foot, flat and reserved base.
|
|
| 22.9.1
|
Pappas figurine consisting of a rectangular body, ovoid in cross-section, flaring at the base, with a concave resting surface. At the top of the body or trunk, two rudimentary 'arms' extend in triangular forms that terminate in rounded stumps; above, the neck rises in a cylinder from which (on the front) extends a protrusion that suggests a nose, above which is a flat piece of clay coiled back on itself, resting against a widening cylindrical 'polos' crown, which is concave at the top.
|
|
| 22.9.7
|
Broad concave rim; short neck flowing into bulbous body; crude, thick strap handle joins body from rim and shoulder; short foot; broad, flat base.
|
|
| 23.11.31V
|
Warrior facing right, with crested helmet and round shield decorated with "bicycle-spoke" design. There is an also area of square grid-marking on the neck, below the back of the helmet.
|
|
| 25.8.6
|
Handle is small and joined from shoulder to neck. Shallow cup mouth.
|
|
| 26.2.100
|
Neck sherd of Attic West Slope black-glazed pottery amphora;
|
|
| 26.2.4
|
Fragment of mouth, neck, body, and handle of Corinthian black-figured pottery ring-aryballos;
|
|
| 26.2.44
|
Shoulder sherd of North Ionian Late Wild Goat Style pottery closed vessel, amphora or oinochoe, with part of neck;
|
|
| 26.2.56
|
Rim, neck and shoulder sherd of North Ionian Late Wild Goat Style black-figured pottery column-krater;
|
|
| 26.2.78
|
Neck and shoulder sherd of East Greek pottery open vessel, possibly a krater;
|
|
| 26.2.88
|
Rim and mouth sherd of Corinthian, probably black-figured, pottery globular aryballos with part of neck;
|
|
| 27.10.1
|
Shape A (BSA xlii, p.15). Neck and handles modern, undecorated. Body almost spherical, base flat.
|
|
| 28.6.5
|
Neck extends up from the side of the piece, approximately one quarter of the way round from the handle, flaring into mouth.
|
|
| 29.11.2
|
Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center.
Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments').
|
|
| 34.10.13
|
Squat lekythos. Flared mouth with flat rim. Thin neck with single curved handle attached at top and finishing at shoulder. Ridge separates the neck from the shoulder.
Cf. Agora 12 part 2, no. 1138, pl. 38
|
|
| 34.10.2
|
Round ('ball aryballos'). Wide flat rim to mouth with thin neck. Single handle.
|
|
| 34.10.26
|
Fragment of head and neck of large figuring (female). Inside is completely hollow.
|
|
| 34.10.9
|
Hellenistic jug with twisted rope handle. Handle extends from shoulder to where grooves are at the top of the neck.
|
|
| 34.2.2
|
Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body.
|
|
| 34.8.10
|
Long slender neck flaring into mouth; small ovaloid body; groove above small foot; two semicircular, vertical handles attached to top of shoulder
|
|
| 34.8.15B
|
Squat neck with lip, round in body, round bottom (sits on stand 34.8.15A).
|
|
| 34.8.2
|
it is a small lekythos with a ring flat foot, rounded body, tubular and thin neck, cup mouth with slightly concave upper surface, there is one handle from the upper part of the body to the lower part of the cup mouth
|
|
| 35.4.2
|
The handle is small and joined from the shoulder to the neck below the mouth and the body is ellipsoid.
|
|
| 37.11.7
|
Flaring mouth and wide neck separated from body by a moulded groove. Single curved handle starting at groove and bending to lip. Small foot, base slightly concave.
|
|
| 38.12.1
|
Squat lekythos. Flared mouth. Ridge at top and base of neck.
|
|
| 38.4.5
|
Hand-made, body is wider towards the base, base is flatened. Neck and handle are missing. Small flat lug (mini handle) on either side of the missing handle.
|
|
| 38.4.7
|
One vertical and two horizontal handles. Mouth tapers to long, wide neck. Vertical handle from top of shoulder almost to top of neck.
|
|
| 44.1.2
|
'Little lion' shape. Ure 1927, 54: 'Rhitsona Class P'; Haspels ABL 107: 'Little Lion Group'. Shallow mouth. Thin neck. Very thin disk foot. Base concave.
|
|
| 45.10.1
|
High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
|
|
| 45.10.14.1
|
Neck amphora
|
|
| 45.10.14.2
|
Neck amphora
|
|
| 45.10.22
|
Neck amphora
|
|
| 45.10.27
|
Fragment of the neck of a lekythos
|
|
| 45.6.16
|
Flared cup mouth. Strap Handle descending from top of neck to sloping shoulder. Base has a central concave section.
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p49 shape class
K, pl. 15 no. 80.249
|
|
| 45.6.17
|
Flared mouth with flat lip. Handle starts halfway down neck, curves up and then down to join shoulder. Long, narrow body. Broad foot. Central concave section on base.
|
|
| 45.6.29
|
Bell mouth with rounded upper rim and offset neck.
|
|
| 45.6.30
|
Molded, overhanging rim with a lower flange, curving into a thin neck which gradually widens to an ovoid body; molded foot, concave on the underside.
For shape cf. bottles found at Metaponto that are similar (in shape and decoration) catalogued by L. Burn in Carter 1998, 2.632-633, especially T 192-6. Cf. also Padova, Museo Civico Archeologico inv. 1746-C: Zampieri 1996, 203-204 no. 58 (ill.).
|
|
| 45.6.31
|
Neck amphora with wide mouth; long, wide neck; two vertical handles from top of rim to middle of body; donut shaped body slopes into thick stem; small, flat foot; flat resting surface and slightly raised underside.
|
|
| 45.6.33
|
Outturned rim; tall thin neck leading into broad shoulder with two lugs opposite each other; almost vertically-sided body; flat base surrounded by very slight ridge.
|
|
| 45.6.34
|
Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi).
|
|
| 45.6.37
|
Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot.
|
|
| 45.6.56
|
"tear-bottle" - outturned rim; long thin neck; inverted ovoid body tapers to long thin stem and outturned foot mirroring rim and neck; small, flat base.
|
|
| 45.9.2
|
Flat-lipped conical mouth, vertical strap handle rising from the bottom of the neck and reattached at the top of the 'ankle' on the body, which is in the shape of a left foot wearing a sandal. The base is a flat surface, separated from the sole by an incised line.
|
|
| 46.9.1
|
'Little lion' shape. Shallow, flaring mouth; thin neck from the top of which a single strap thin handle curves down to the flat shoulder; slight ridge between neck and shoulder; body tapers down to disk foot; base flat with central concave circle.
Cf. Agora 12 part 2, no. 1115, pl. 38
|
|
| 48.12.10
|
Long tall neck from the top of which handle loops up and then down to join edge of broad shoulder, curning slightly upwards. Straight body; sturdy, flat foot; concave base.
Cf. Smith 2003, BSA 98, p349, footnote 24, pl. 58 d-f (see also 'comments').
|
|
| 48.12.13
|
Short straight tapering neck; shoulder meets the body at a corner point; two small handles are attached to the upper body; the body is bulbous and has no foot.
|
|
| 48.12.4
|
Broad, flat rim; short neck the length of which runs the handle with a hole for suspension; inverted oviod body; rounded base.
|
|
| 48.12.5
|
Vertical strap handle curves up from rim and joins shoulder, rising slightly over the rim; trefoil lip; long cylindrical neck; half-sphere body; flat base
|
|
| 48.12.6
|
Disk-shaped mouth with flat rim; cylindrical neck; flat strap handle reaches from rim down to middle of shoulder; body is a slightly flattened ball, round on the bottom.
|
|
| 48.12.7
|
Flaring neck; upper part of body slopes sharply out to junction with bottom of single curved vertical circular handle. Widest part of body is towards base making a 'squat' shape. Flat base.
|
|
| 48.12.9
|
Projecting rounded rim with a lip that is flat on the upper surface; ribbed vertical strap handle extending 1/3 down the length of the vessel; slender neck widening to a cucumber shaped body. Flat concave base, the underside of which is outlined with a groove.
|
|
| 48.5.2
|
Mouth has thin rim and near vertical walls tapering down to neck; two upside down U-shaped handles start mid-neck and curve upwards before joining the shoulder; inverted ovoid body; near conical foot with mirrored concave base.
|
|
| 48.5.3
|
Tall jug with rounded rim, cylindrical neck, piriform body, and high arching loop handle that rises from the rim.
|
|
| 49.1.2
|
A slim alabastron with a small mouth and a projecting rim, an offset neck, lugs on either side of the body near the neck, and a raised three-stepped foot that is slightly concave on the underside.
|
|
| 49.8.1
|
Unusual form; neck and body are identical to a shape 8M oinochoe (mug) in Boston, Museum of Fine Arts 22.632 (Padgett 1993, 211 no. 142, ill.), as if a fancier rim, handle, and lower part of the foot have been added to this piece.
|
|
| 49.8.10
|
Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
|
|
| 49.8.12
|
Flaring mouth, flat rim on the top; single strap handle curves down from top of neck to shoulder; body tapers to thick disk foot; flat base except for concave central circle.
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p48, pl. 16 nos. 18.52 & especially 18.62 (feet missing so cannot be compared)
|
|
| 49.8.4
|
Flat-bottomed aryballos. Broad, flat rim; tall thin neck; vertical strap handle; rounded body; small footring; slightly convex base.
|
|
| 49.8.6
|
Trefoil lipped; thin neck; thick strap handle curves down from back of lip to lower body; half-sphere shaped body; flat base.
|
|
| 49.8.9
|
Scale aryballos (pointed/piriform). The vessel has a flat, wide, disk-shaped rim, a banded handle and a slim, cylindrical neck. The body is ovaloid (inverted egg) and the base is ring-shaped.
|
|
| 50.10.1
|
Coldstream (79) classes this amphora as part of the 'plump and ungainly group' of LG IIb amphorae whose potters modelled amphora bodies after those of pitchers (see J.M. Cook, BSA 42, 151).
Flaring mouth with rounded, thickened rim; two vertical strap thick handles extend from the top of the decorative zone on the neck down to the bottom of the decorative zone on the shoulder; rounded body tapers to a ring foot. Flat underside
|
|
| 50.12.12
|
Fragment of neck
|
|
| 50.3.1
|
Flat rim; shallow mouth; broad neck; two handles curve upwards from near the bottom of the neck to the top of the body; small ridge between neck and shoulder; body tapers into broad, thick, flat base; underside concave.
|
|
| 50.4.15
|
Rim curved slightly outwards. Inclining neck of roughly equal depth and diameter as bowl. Small vertical handles curving from rim to mid-section. Convex bowl. Torus (tyre shaped) foot with no stem.
|
|
| 50.4.20
|
Outward facing lip on a rim folded into a grape leaf shape, shape continues down neck. Neck joins a plain convex shoulder. Tapering lower body joining slightly taurus foot with slightly concave base. Curved vertical handle attached to the lip and the shoulder
|
|
| 50.4.5
|
Type 7a. Cut-away neck, with a vertical strap handle attached to the lowest part, rejoining the body at the bottom of the shoulder; cylindrical neck sharply joining sloping shoulder, which curves into the ovoid upper body, tapering into a cylindrical lower body; raised base; reserved on the interior, underside and resting surface.
|
|
| 50.4.7
|
Small dimensions. Flaring mouth. Tall cylindrical neck, strap hanlde connecting the lower part of the neck with the shoulder. Almost flat shoulder.
|
|
| 50.4.8
|
Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder.
|
|
| 50.4.9
|
Trefoil lipped; rounded handle curves up from the rim to the upper part of the body; short neck curves sharply into shoulder and bulbous body; small footring; flat underside.
|
|
| 50.5.1
|
Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised.
|
|
| 50.5.3
|
Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot.
Base convex underneath.
|
|
| 51.1.3
|
Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base.
|
|
| 51.4.1
|
Fragment of the rim and neck, around the surface of the handle.
|
|
| 51.4.11
|
Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join.
|
|
| 51.4.2
|
Fragment of the rim, neck and body (preserved only on the right termination).
|
|
| 51.4.3
|
Fragment from a the rim (very little preserved), neck and body of a column krater.
|
|
| 51.4.4
|
Fragment (two parts, joined together) of the rim, neck and body.
|
|
| 51.4.8
|
The rim is slightly flared and the neck is short; a strap vertical handle curves down from the rim to the shoulder; two smaller, round, horizontal handles protrude from the upper side of the rounded and pear shaped body; the foot is small and flaring; the base is convex
|
|
| 51.7.1
|
Trefoil lipped; high handle with ridge down middle curves up from the shoulder considerably higher than the rim; neck progresses smoothly to body, as body does to foot; foot is stepped with the side reserved; underneath is ruddled and concave with convex centre.
|
|
| 51.7.13
|
Small pseudo-panathenaic amphora with downturned rim (and skewed mouth), offset neck divided from the sloping shoulder by a ridge, vertical strap handles curving up from the bottom of the neck to the bottom of the shoulder, ovoid body tapering to a thick stem, and a curved pedestal foot that is highly concave on the interior.
|
|
| 51.7.16
|
Wide cup mouth with a reserved, flat rim. Two tripartite strap handles rise up from the neck and join the body at the shoulders. Ovoid body tapers to a thick disk foot, beneath a short (restored) stem. Base is concave
|
|
| 51.7.5
|
Bell mouth, flaring at the rim, with a convex upper surface, offset from a narrow neck, broadening and curving sharply into the ovoid body; strap handle rises from the top of the neck and joins the lower part of the shoulder; molded ring base, divded into two concave parts, divied by a ridge at the middle; convex underside.
|
|
| 51.7.8
|
Cup mouth with slightly concave upper surface, tubular neck offset from mouth and shoulder; ridged vertical strap handle loops up from top of neck and descends directly to the shoulder; squat body; broad torus ring foot.
|
|
| 52.3.1
|
Wide mouth with flat, reserved rim. Two strap handles, one on each side, curve up from top of neck then down to shoulder. Body is inverted pear shape, tapering to very small foot with groove in middle.Ring on the junction of the body and the foot. Underside almost conical up to small, central, convex circle
|
|
| 52.3.2
|
Flat rim; tall mouth sloping in towards thin neck; handle curves up from top of neck, then down to body; groove separates rounded body from flat foot
|
|
| 52.3.3
|
Broad flat rim; short thick neck; handles are comprised of two vertical bars joined at the rim by an overhanging horizontal bar with downward protrusions at either end; body tapers to conical footring; flat base.
|
|
| 54.2.2
|
Everted lip; thin, tapering neck; strap handle curves down from rim to spherical, bulbous body; slightly raised flat foot.
|
|
| 55.1.1
|
Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body.
|
|
| 56.8.1
|
Rim is flat and the neck blends into shoulder. Body descends into a thin groove before a sloping foot.
|
|
| 58.2.1
|
Rounded mouth with downturned rim; thin neck curves continuously into rounded body; small foot with vertical sides.
|
|
| 58.2.2
|
Sloping rim; thin neck; inverted pear-shaped body tapering to a small rounded foot.
|
|
| 58.2.4
|
Wide rim with bevelled lip. Long wide neck leading to a short and rounded body, base protrudes from body but has been damaged (during firing process ?). The handle attaches to the top of the body and then again at the join of the rim and the neck. There is a fork shaped spur which follows the curve of the handle and rim and then continues above the main body of the jug.
|
|
| 58.2.5
|
Round body somewhat pointed at the base. Cut-away neck spout (derived from Anatolian precursors). Handle attaches to the middle of the spout and then rejoins the jug on the shoulder.
|
|
| 59.2.4
|
Carnelian arrowhead-shaped bead or amulet with suspension hole through the neck.
|
|
| 60.1.2
|
Pagenstecher lekythos. (Restored rim); thin neck from the middle of which handle protrudes horizontally before sloping down to rounded body; broad foot; concave underside
|
|
| 60.1.5
|
Bell-shaped mouth with high outturned rim and broad, slightly convex lip;long neck widens to shoulder with smooth contour to ovoid body; vertical strap handle rising from top of neck and rejoining at bottom of shoulder; short ring foot.
|
|
| 60.8.2
|
Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot
|
|
| 61.6.1.8
|
Ovaloid jug with a small mouth, a long neck flaring to a large body, and tapering again to a small, plain base; fat, rounded handle.
|
|
| 67.6.1
|
A plaster cast head of a Lapith from a metope (South 6) of the Parthenon.Broken off at the middle of the neck; the face bears a gouge on the left cheek and most of the nose is broken off.
|
|
| 67.7.2
|
Outturned rim; long, thin, roughly rendered neck; inverted oviod body tapering smoothly into thin stem slightly shorter than neck; flares out to flat base.
|
|
| 69.7.1
|
Foot-shaped aryballos; Dohan Morrow's Group II, 'network sandals' (Dohan Morrow 1985, 6-9) or Ducat's type B foot-shaped vases (Ducat 1966, 182-84).
Foot-shaped aryballos with a broad rim, short vertical strap handle, squared, offset neck; the body of the vase in the shape of a left foot, including ankle, with relief decoration that gives the effect of a sandal enclosing it, and a flat, reserved base.
|
|
| 71.12.1
|
Ovaloid shape. Slightly deep rounded mouth. Strap handle connecting the neck to the shoulder.
|
|
| 73.9.29
|
Part of the body and neck of a vase.
|
|
| 76.6.1
|
Trefoil lipped. Oval shaped body with single handle from mouth to back, with a curled over section at end. Flat base. Small round neck.
|
|
| 77.5.1.1-17
|
Seventeen fragments from the same Nikosthenic amphora. 1) Should be rejoined to 2. Part of the body. There is white plaster on both surfaces . 2) Should be rejoined to 1. Part of the body. There are traces of plaster on both sides and adhesives. 3) Part of the body. White plaster and adhesives on both sides. 4) Part of the body. White plaster on both sides and adhesives. 5) Should be rejoined to 6. Part of the body. Adhesives. 6) Should be rejoined to 5. Part of the body. Exterior: There are areas that have been chipped off and few bits that have been pitted off. Interior: There is a layer of white plaster. 7) Could be rejoined to 8? Part of the body. There are bits that have been pitted off on the exterior and the interior is covered with plaster and adhesives. 8) Could be rejoined to 7? Part of the body. White plaster and adhesives on the interior and traces of plaster on the exterior, where there are also bits that have been pitted off. 9) Should be rejoined to 10. Part of the body. White plaster on both surfaces. 10) Should be rejoined to 9. Part of the body. The interior is covered with white plaster and there are traces of it on the exterior. 11) Should be rejoined to 12. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 12) Should be rejoined to 11. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 13) Should be rejoined to 14. Part of the neck. There are traces of white plaster on the interior. Many bits have been pitted off from boith surfaces. 14) Should be rejoined to 13 and 15. Part of the neck. There are traces of plaster and adhesives on both sides, as well as many bits that have been pitted off. 15) Should be rejoined to 14. Part of the neck. There are traces of white plaster on both surfaces, as well as adhesives. There are few scratches on the exterior and several bits that have been pitted off, especially from the interior. 16) Part of the body. Adhesives and traces of white plaster. There are areas on the exterior, where the colour appears to have been peeled off and some pitting off. 17) Bit of white plaster-part of rim? and covered with adhesives.
|
|
| 81.9.1
|
Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder.
|
|
| 85.3.1
|
High, vertical sided neck joins sharply at shoulder with bulbous body; two-stepped base, bottom step rounded; concave base.
|
|
| 85.3.2
|
Wide, concave rim; short strap handle from bottom of lip to shoulder; thin short neck curves uninterrupted into bulbous body; slightly concave underside.
|
|
| 91.11.1
|
Tall bottle with wide flanged lip; very long and narrow neck; stout conical shaped body with flat resting surface and slightly concave base.
|
|
| E.2002.8.1
|
Pronounced thick lip, no neck, bulbous body tapering to a pointed base.
|
|
| E.23.19
|
Tall pointed jar with flattened, narrow base. Wide mouth with narrow lip and wide neck. Lugs at either side, perforated with thread holes.
|
|
| E.23.20
|
Tall jar with a wide mouth, long neck and small flat base.
|
|
| E.23.22
|
Tumbler shaped cup, mouth is wide with no neck. Tapering to a pronounced, flat step-like foot.
|
|
| E.23.23
|
Pear shaped jar with a pronounced lip, short neck, and pointed base, widest point has a ridge which is uneven.
|
|
| E.23.24
|
Squat jar with rounded everted lip, short neck, and rounded base.
|
|
| E.23.25
|
Slightly everted lip, wide neck, bulbous body, and everted pedestal foot with concave base.
|
|
| E.23.26
|
Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body.
|
|
| E.23.27
|
Broad shouldered jar with thin lip, broad neck, and body that tapers down to a conoidic foot which is slightly raised from the rest of the body.
|
|
| E.23.30
|
Squat, gourd-like in shape with handle. Neck is long, the handle attaches to the top of the shoulder, follows the handle upwards for a centimetre and the bends back to reattach on the upper body. The body is spherical in shape, tapering to a small disc base.
|
|
| E.23.31
|
Pronounced lip, short neck, rotund body which tapers to a flat base.
|
|
| E.23.32
|
Undulating lip, long neck, bulbous shoulder tapering to a pointed base. Two opposing handles emerge on the sholder just below the band decoration.
|
|
| E.23.33
|
Lip is unpronounced, long neck flares to shoulder/widest point, which then tapers to pointed foot. The rough handles are directly opposite each other on the widest point.
|
|
| E.23.36
|
Round vase, no neck, open mouth.
|
|
| E.47.6.9
|
Undulating pie-crust mouth (probably hand molded). The body is globular and the base is rounded, with a small part flattened. The base presents the finger marks of the potter. It seems to have been suspended by a string around the neck (attached).
|
|
| E.62.30
|
Small vase, with pronounced lip and neck. Shoulders are widest point tapering to a flat base.
|
|
| E.62.34
|
Part of jug and basin set (basin missing). Flat base, wide shoulders, tall neck (ca. 6 cm), with striated lip and wide mouth.
|
|
| E.62.44
|
Lid is oval with a central circular knob and traces of an incised band on top. (Lid is missing!) Body has a flat rim, same shape and size as lid so they sit together, but with a central circular opening. Thin neck leading to shoulders. Four oblong feet at each 'corner' and the base between is flat. Flat rim on top of body is reserved. The inside is a cylindrical well, not matching the contours or shape of the outside. Heavy object.
|
|
| E.62.50
|
The mouth is wide with no neck. The body is bulbous tapering to a flat base.
|
|
| E.62.55
|
There is no neck and the body tapers to a flat base. The two handles are directly opposite one another on the mouth.
|
|
| E.62.56
|
Poppy flask, with a fat body, long bottle neck with spreading lip, large handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.412, from Abydos (Base-ring I Ware)
|
|
| E.62.60
|
Large mouth, no neck, three handles for string, widest part is mid-way down the body, flat base.
|
|
| E.62.61
|
Small vase, probably for make-up purposes. Pronounced flat lip, no neck, flaring to a flat base.
|
|
| E.63.23
|
Thin lip, narrow neck, curved shoulders and pointed base.
|
|
| E.63.24
|
Wide necked jar with a large lip and a small neck.
|
|
| E.63.27
|
A small lip tapering to a narrow mouth. The neck is long leading straight down to globular body the widest point of which is the shoulder. The body tapers to a flat base.
|
|
| E.63.28
|
The lip is narrow, no neck and a weak shoulder. The body flares to the widest point in the lower half of the jar just above the foot. The widest point tapers to the foot, which is approximately 1cm in height with a flat base.
|
|
| E.63.6
|
Small blue figure of the god Ptah (Specifically Ptah-Sokar, a combination of the creator god Ptah and the falcon headed god of the dead Sokar). The ponytail of the figure is looped in such a way that it would enable threading. The figure is squat and is naked aside from some neck decoration and a loin cloth. The figure stands on a flat oval base.
|
|
| E.65.1
|
Wide flaring lip with rounded rim, narrowing to a short neck, broadening to an ovoid body, with a pointed base.
|
|
| L.2011.1.1
|
Quite cylindrical handle, extending from the rim to the shoulder, slightly rising over the rim. Ridge between rim and neck. Cylindrical neck; torus rim (convex).
|
|
| L.2011.1.26
|
Fragmented neck with remnants of a handle. Bulbous neck, wider near the outturned rim.
|
|
| L.2011.1.51
|
Fragment of rim and one handle, evidence of the connection of the second handle. Vertical short handle with the right side more protruding, extended from the lower part of the rim to the shoulder. Short cylindrical neck, flaring in a quite horizontal shoulder.
|
|
| L.2016.3.11
|
Flask made of thin glass. Long, narrow neck leads to an ovoid body with concave base.
|
|
| L.2016.3.31
|
Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
|
|
| L.2016.3.8
|
Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
|
|
| REDMG:1926.99.50
|
Flaring broad lip, quite short, above a short neck which curves into a globular body, round bottomed.
|
|
| REDMG:1926.99.52
|
Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip.
|
|
| REDMG:1926.99.54
|
Chimney mouth (missing), offset slightly from a tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle arches up from just below the mouth and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is slightly convex; the slightly concave underside has a conical indentation at centre.
|
|
| REDMG:1926.99.60
|
Cup mouth, cylindrical neck, to which inside of handle is attached and rises, rejoining at the shoulder; body with straight sides descending from carination at bottom of shoulder; lower body curves in to join molded pedestal foot, with slightly sloping upper surface, scotia above torus on vertical surface, and flat underside.
|
|
| REDMG:1934.53.5
|
Belly-handled jar. High outturned rim narrowing to a short neck; ovoid body, in the centre of which are attached two vertical round handles, canted; flat base, slightly concave. Cf. larger examples of this shape are in Toronto, Royal Ontario Museum 918.3.77 (Hayes 1984, 47, no. B29, ill.) and Orvieto, Querce inv. 398 (Camporeale 1970, 126 no. 136, fig. 59, pl. 32b).
|
|
| REDMG:1935.87.1
|
Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside.
|
|
| REDMG:1935.87.2
|
Two tall handles, which each extend from the neck to the top of the shoulderr; resting surface slopes slightly; base hollow.
|
|
| REDMG:1935.87.21
|
Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
|
|
| REDMG:1935.87.25
|
Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre.
|
|
| REDMG:1942.5.6.1
|
Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder.
|
|
| REDMG:1942.5.6.2
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1947.13.1
|
Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
|
|
| REDMG:1950.25.1
|
Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim.
|
|
| REDMG:1951.130.1
|
Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface.
|
|
| REDMG:1951.131.1
|
Slim alabastron with narrow mouth, projecting rim, slightly convex on the upper surface, and beveled at the edge, flat on the underside; tall, slightly concave neck, offset from a tall ovoid body, with two small lug handles on the upper 1/4 of the body; molded pedestal foot is comprised of a tapering upper element broadening into a disk foot, with a diagonal outer surface, with three ridges, a flat resting surface, and a conical indentation on the underside.
|
|
| REDMG:1951.140.1
|
Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder.
|
|
| REDMG:1951.142.1
|
Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside.
|
|
| REDMG:1951.143.1
|
Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside.
|
|
| REDMG:1951.147.1
|
Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
|
|
| REDMG:1951.148
|
Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot.
|
|
| REDMG:1951.150.1
|
Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders.
|
|
| REDMG:1951.151.1
|
According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
|
|
| REDMG:1951.152
|
Moulded grooved rim, with a flat overhanging lip, atop a thin, nearly cylindrical neck, attached to an ovoid body, ridged at the top; raised base, with thin reseting surface and slightly pointed underside.
|
|
| REDMG:1951.153.1
|
Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail.
|
|
| REDMG:1951.154
|
Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom.
|
|
| REDMG:1951.155
|
Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base.
|
|
| REDMG:1951.156.1
|
Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem.
|
|
| REDMG:1951.157.1
|
Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
|
|
| REDMG:1951.158.1
|
Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside.
|
|
| REDMG:1951.159.1
|
Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
|
|
| REDMG:1953.25.13
|
Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
|
|
| REDMG:1953.25.14
|
Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
|
|
| REDMG:1953.25.15
|
Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
|
|
| REDMG:1953.25.16
|
Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group
|
|
| REDMG:1953.25.17
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1953.25.20
|
Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
|
|
| REDMG:1953.25.22
|
Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre.
|
|
| REDMG:1953.25.23
|
Chimney mouth (missing), offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is concave above convex; the flat base has a conical indentation at centre.
|
|
| REDMG:1953.25.25
|
Tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering gently towards the base, which is attached to a moulded pedestal foot, tapering down, with a profile that is slightly convex; the underside has a conical indentation at centre.
|
|
| REDMG:1953.25.26
|
Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside.
|
|
| REDMG:1953.25.27
|
Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap handle rises from the top of the neck and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside.
|
|
| REDMG:1953.25.28
|
Narrow neck (mostly missing), broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving in to a short stem, attached to a small pedestal foot with a raised base; small nipple at the centre of the underside.
|
|
| REDMG:1953.25.29
|
Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving sharply into a short stem, attached to a small pedestal foot, tapering down, with a slightly raised base; small nipple at the centre of the underside.
|
|
| REDMG:1953.25.30
|
White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
|
|
| REDMG:1953.25.34
|
The vessel presents a rounded belly with a very narrow neck, which ends in a flat rim with a inner lip that would prevent the liquid from falling.
|
|
| REDMG:1953.25.35
|
Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder.
|
|
| REDMG:1953.25.36
|
Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
|
|
| REDMG:1953.25.43
|
Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
|
|
| REDMG:1953.25.48
|
Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.49
|
Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
|
|
| REDMG:1953.25.50
|
Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.51
|
Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
|
|
| REDMG:1953.25.52
|
Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside.
|
|
| REDMG:1953.25.53
|
Incurving rim with concave lip, narrowing to a short neck at the top of which is attached a small vertical strap handle that extends the the shoulder; wall curves continuously from neck, widening to an ovoid body atop a disk foot; underside concave with a slight circular protruberance at centre. Tapering 'cucumber', survival of the Late Corinthian Archaic type (see Corinth 13, 140-41, fig. 15), but with a disk foot. E.g. Corinth T1317: Corinth 13, 222 no. 277-4, pl. 37. Cf. also Rhitsona 50.273.
|
|
| REDMG:1953.25.54
|
Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
|
|
| REDMG:1953.25.55
|
Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted).
|
|
| REDMG:1953.25.57
|
Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
|
|
| REDMG:1953.25.59
|
Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.60
|
Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
|
|
| REDMG:1953.25.61
|
Moulded mouth, flares to tall rim, which narrows to a tall, cylindrical neck; neck curves gently into a sloping shoulder, grooved near the join to the body, which broadens slightly and then tapers, with slightly concave sides, to a slightly raised base, grooved on the resting surface, flat on the sunken underside.
|
|
| REDMG:1953.25.62
|
Broad mouth with thickened downturned rim. Slender neck sloping to a nearly horizontal shoulder, from which emerge two lug handles, just below a moulded band; finely ribbed body that tapers to a short raised base.
|
|
| REDMG:1953.25.64
|
Narrow neck, nearly flat shoulder, curving to a broad body, tapering slightly down, to a slightly raised base, concave at the centre; two pinched triangular round handles rise from the edge of the shoulder, on opposite sides of the bottle.
|
|
| REDMG:1953.25.65
|
Flaring broad lip with flat upper surface and a short rim curving into a cylindrical neck above a moulded ring, from which descends the conical body, narrowing slightly to a flat base, with a slightly bevelled edge.
|
|
| REDMG:1953.25.66
|
Two thin vertical strap handles arch up from the top of a cylindrical neck, slightly offset at the bottom, and rejoin at the middle of a sloping shoulder; shoulder curves sharply into a conical body, slightly rounded at the bottom where it joins a short stem flaring to a disk foot, hollowed at the bottom.
|
|
| REDMG:1953.25.86
|
Fragment. Head of woman. Hair centrally parted, waves and ringlets hanging over and below ears. Stephane and veil. Neck with Venus rings. Large eyes.
|
|
| REDMG:1953.25.99
|
Standing female figure, drapery knotted round hips, leaving one leg bare, and falling on left shoulder. Back plain, with hole for suspension. On right side, amphora with ridged neck.
|
|
| REDMG:1958.111.1
|
Slightly flaring cup mouth, with a slightly convex upper surface; strap handle (lopsided) rises from the top of the neck and rejoins at the middle of the shoulder; cylindrical neck, broadening at the bottom, offset from the globular body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside.
|
|
| REDMG:1958.112.1
|
Cup mouth with flat rim, tall cylindrical neck, slightly widening at the top, curving into a diagonal shoulder, below which (from a carination) the body tapers slightly, and then curves sharply to join a tall moulded base, with straight sides, slightly concave on the underside, with a cylindrical depression; a vertical strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination.
|
|
| REDMG:1958.19.1
|
Jug with tall narrow tapering neck, beak spout, and bulbous body. Vertical strap handle joins the base of the neck near the spout and a thrid where the neck and body are joined.
|
|
| REDMG:1958.23.1
|
Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
|
|
| REDMG:1958.33.1
|
Jug with bulbous body with delineated flat base. Single strap handle joins the upper body to the centre of the long neck with a funnel-shaped mouth ending with an everted rim.
|
|
| REDMG:1961.150.1
|
Spreading lip, flat, with rounded rim, above tall, cylindrical neck, with ridge at center, just above attachment of l-shaped strap-handle, joining at centre of shoulder; squat piriform body, nearly flat base, ridge at exterior, groove just within.
|
|
| REDMG:1961.150.2
|
Slightly flaring body with a rounded base. Tall narrow neck and beak spout. Base is uneven and therefore the vessel leans to one side.
|
|
| REDMG:1961.150.3
|
Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided.
|
|
| REDMG:1961.199.1
|
Very narrow neck, from which loops up a small, narrow strap handle, which rejoins at the middle of the broad shoulder. The shoulder curves into a bulbous body, grooved just above a slightly raised base. The underside is slightly concave at its centre. Some circular ridges (comb ot wire marks) remain on the underside.
|
|
| REDMG:1961.199.3
|
Continuously curving sides: flaring rim, rounded on the upper surface, broad cylindrical neck, nearly diagonal shoulders, ovoid body narrowing to a pinched stem, flaring base, flat (although rough and thus unstable) on the underside.
|
|
| REDMG:1961.199.4
|
Cylindrical neck, narrowing (pinched) towards the body, piriform body, tapering more gently below, rounded above the flat base.
|
|
| REDMG:1962.184.33.21
|
Cup mouth on cylindrical neck, slightly narrowing and then curving to a slightly diagonal shoulder; narrow strap handle extends from the middle of the neck to the bottom of the shoulder, just above a carination, from which descends the nearly straight side walls; body narrow sharply at the bottom to a short stem attached to a tall moulded base, which tapers down.
|
|
| REDMG:1964.1159.1
|
Horse and rider. Rider is comparatively smaller to horse and holding round the neck of the horse.
|
|
| REDMG:1964.1620
|
Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled.
|
|
| REDMG:1964.1622
|
Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside.
|
|
| REDMG:1964.1624
|
Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base.
|
|
| REDMG:1964.1625
|
Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside.
|
|
| REDMG:1964.1647
|
Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
|
|
| REDMG:1964.1648
|
Projecting rim, with rounded lip and with slightly concave mouth, from which emerges a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap handle that curves down to the middle of the shoulder; globular body with a flat bottom.
|
|
| REDMG:1964.1649
|
White-ground lekythos, group iii. Tall cylindrical neck broadening to a diagonal shoulder. Vertical strap handle rises from top of neck to bottom of the shoulder, where it broadens. Below the handle attachment a carination marks the join with the straight body, which narrows at the base to a molded pedestal foot with a slightly concave outer edge, convex underside, indented in the centre.
|
|
| REDMG:1964.1661
|
Everted rounded rim with flat upper surface, tapering to a narrow neck that broadens to a piriform body, conical in the lower part, on a tall, slightly flaring foot, with a flat resting surface and conical depression with a nipple at the center.
|
|
| REDMG:1964.1666.1
|
Round, curled over mouth with thin, long neck. Squat body. Base is slightly concave.
|
|
| REDMG:1964.1668.1
|
Unguent Jar. Miniature amphora with an everted rim, long and narrow neck, and foot with a concave base. Handles on either side and completely attached to the upper body.
|
|
| REDMG:1964.1699.1
|
Everted rounded rim which tapers to a short neck and then broadens to a body with nearly vertical sides, slightly tapering to a flat base; round vertical handle, twisted, extends from the rim to the shoulder.
|
|
| REDMG:1997.209.2
|
Bulbous vase, with rounded outturned rim, a tall cylindrical neck tapering down and then broadening to a baggy body with a narrow, flat base. Striations on the exterior indicate where the vase was scraped by the pottery during creation.
|
|
| REDMG:1997.209.3
|
Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
|
|
| REDMG:1998.153.4
|
Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks.
|
|
| REDMG:2003.84.1
|
Amphora with a wide neck tapering towards an outward rim. Two handles attached horizontally to the shoulder. Wide body tapers towards the delineated, slightly concave base.
|
|
| REDMG:2003.92.1
|
Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
|
|
| REDMG:2003.93.1
|
Squat wide body that tapers towards a ring base. The body is flat and angled in places. Single-reliefed handle joins the long tapering neck near the thick rim and shoulder.
|
|
| REDMG:2004.95.1
|
Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside.
|
|
| REDMG:2004.98.1
|
Cup mouth, with a slightly convex upper surface; tall cylindrical neck, from which rises a thin vertical strap handle, that rejoins the diagonal shoulder just above the carination; straight sides, taper gently towards the base, to which is attached a molded pedestal foot, slightly concave on the underside, with a cylindrical depression at centre.
|
|
| T.2012.11.28
|
Neck of a column krater.
|
|
| TEMP.2005.1.4
|
Body and base uniform in widths with a flat op/opening of same width. Small indentations at neck and between body and base of vase.
|
|
| TEMP.2005.1.5
|
Neck and top section of the body. Top appears to have squared area; perhaps where a handle was connected.
|
|
| TEMP.2005.1.6
|
Short body with long thin neck.
|
|
| TEMP.2005.1.7
|
Round but flattened body with a short, wide neck and flat, rounded base. Potentially once had a handle.
|
|
| TEMP.2005.1.8
|
Rounded, flattened body with a short and wide neck. One side of the neck protrudes out further, indicating a handle?
|
|
| TEMP.2007.2.45
|
Fragment of a mouth and neck
|
|
| TEMP.2012.11.33
|
Neck fragment
|
|
| TEMP.2022.6.1
|
belly jar: ovoid body with a short neck and protunding edge, with a rounded base.
|
|
| TEMP.2022.6.2
|
course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, protunding edge; the base is smaller than the body and it is flat.
|
|
| Temp.2022.7.1
|
it is a oinochoe (a jar used for cooking or for the storage of water or foods). Body rounded, domed to 1/3 of the height, short neck, the rim is circular and made to pour the liquid, small handle.
|
|
| temp.2014.12.1
|
the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, a pouring spout and a bigger filling aperture; a single handle from the middle of the neck to the upper part of the body.
|
|
| temp.2014.12.2
|
oinochoe with rounded body, circular mouth and flat base. Single handle from the mouth to the half-belly: small groove at the end of the neck.
|
|
| temp.2022.6.1
|
belly jar, ovoid body with a short neck and protunding rime with a rounded base
|
|
| temp.2022.6.2
|
Apulian/ Messapian ceramic jug, course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth; protunding rim; base is smaller than the body and it is flat
|
|
| temp.2022.7.1
|
it is a oinochoe (a jar used for cooking or for the storage of liquid or food). Body rounded, domed to 1/3 of the height, short neck, the rim is circular and made to pour the liquids; flat base and one small handle
|
|
| temp.2022.7.2
|
narrow-necked ampoule, without handle, the neck is long and thin, rounded body and flat base.
|
|
| temp.2022.7.3
|
the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, rounded neck to insert the oil, a pouring spout in the upper body to pour the olive oil; solid handle from the middle of the neck to the upper part of the body.
|
|
| temp.2022.7.4
|
terracotta jug with rounded body, flat base and large neck; the handle is from the upper part of the neck to the upper part of the body, between the neck and the body there is a groove. There are seven fragment of the neck inside the jar.
|
|
| temp.2022.7.5
|
amphora with rounded body, wider in the upper part; flat base, two symmetrical handles, the neck is smaller than the body and is partially broken; there is a groove between the neck and the body
|
|
| temp.2022.7.6
|
wine jug with rounded body, wider at the middle of the body, with flat base and one handle from the upper part of the neck to the upper part of the body; there is a groove which divides the body from the neck; the rim of the neck is circular and made to pour the liquid
|
|
| temp.2022.7.7
|
small spherical jug with flat base, small neck and one handle
|
|