| 14.9.2
|
Fat body, long bottle neck with spreading lip, large U-shaped handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.418 (with shorter foot and more relief decoration)
|
|
| 2004.8.4
|
Large skyphos fragment
|
|
| 2007.4.79
|
Part of large handle ?
|
|
| 2007.9.11
|
Four-sided, large curved ridge on outer surface, fragment depth much deeper at two edges than at remaining two.
|
|
| 2008.7.170
|
Rectangular fragment (with one large chip missing)
|
|
| 2016.5.3
|
Flaring mouth, wide elongated conical neck, separated from a large ovoid body by a moulded groove. Small round foot. Handle is missing.
|
|
| 2022.7.8.a
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.b
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.c
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.d
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.e
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.f
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.g
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.h
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.i
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.l
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.m
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 22.3.42
|
Open lamp with wide, shallow, circular body, with curved shoulder and a down turned rim. covered flat nozzle with a large oval wick hole. Horizontal band handle which follows the back of the body. Foot is shallow and slightly concave
|
|
| 23.11.31HH
|
Circular shield with raised rim and large domed central boss.
|
|
| 23.11.31NNNN
|
Single fragment consisting of the head and shoulders of a figure facing right. Wearing a large knobbed headdress which is decorated with tall vertical loops with a central line, over long styled hair
|
|
| 23.11.37
|
Miniature kantharos, with two large handles
|
|
| 26.2.25
|
Upper body sherd of East Greek pottery open vessel, probably a krater or a large bowl;
|
|
| 34.10.26
|
Fragment of head and neck of large figuring (female). Inside is completely hollow.
|
|
| 34.10.27
|
Standing male figure in a cloak with his legs crossed, leaning on a support to his right. Figurine is hollow and has large hole in the back. No relief sculpture on the reverse side.
|
|
| 34.8.11
|
Rounded, deep fat body with a small down turning discus and a large filling hole in the centre, small 'kick' at the bottom of the reservoir. Straight sided flat long nozzle with a slightly oval wick hole. Small foot with a slightly concave base.
|
|
| 45.6.66
|
Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences.
|
|
| 45.6.67
|
Circular rounded body with a small amount of discus which inverts into the reservoir. The filling hole is large and circular. The nozzle is long and is slightly upturned with a small circular wick hole and a splayed, slightly rounded tip. Shallow foot, slightly concave.
|
|
| 45.6.68
|
Small circular body with convex shoulder and reservoir meeting at the widest point to form an angular girth. Large filling hole in the center of the body, encircled by a small depression of the discus. Nozzle is flat with slightly curved sides. The tip of the nozzle is flat with rounded, but unequal sides with an oval wick hole. Small shallow circular foot in the center of the body.
|
|
| 45.6.69
|
Restricted lateral ellipsoid body, long convex shoulder shallow lower body. Large filling hole in the center of the body. Beginnings of a flat nozzle with concave side and a circular wick tube. Moderate straight sided foot with concave base, leading to a 'kick' on the internal side of the base.
|
|
| 47.2.3
|
Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
|
|
| 47.2.34
|
Standing mouldmade female, holding tambourine, with pointed headdress and large hands.
|
|
| 49.4.1
|
The mouth is conical, with a large aperture, the handle is banded and the foot is two-stepped and disk-shaped, with a small central concave dot underneath.
|
|
| 49.8.8
|
Trefoil lip; large handle with high sides making central channel curves up from rim, then down to top of body; bulbous body; small, flat base with central sunken disk
|
|
| 50.12.25
|
Fragment of large closed vessel
|
|
| 50.12.41
|
A slightly curved fragment of a large jar.
|
|
| 50.12.43
|
Fragment of large closed vessel.
|
|
| 50.4.12
|
Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove.
|
|
| 50.4.23
|
Circular deep body with a small convex shoulder. Discus is concave with a small filing hole off centre and a small protruding nodule also off centre; this is probably the remains of a suspension lug. Long flat nozzle with a rounded tip and a large wick hole off centre at the end. Base is flat and demarcated with a line.
|
|
| 50.5.2
|
Large bell krater with a downturned rim, two recurved handles on the upper part of the body, lower body sloping to a thick stem and a molded pedestal foot.
|
|
| 50.5.5
|
Large krater with wide, downturned rim that extends sharply from the top of the body; two upcurving handles high on the body, which narrows to a short, cylindrical stem; hollowed pedestal foot, ridged just below the top of the foot. The resting surface is concave and the underside undulates smoothly up to the bottom of the bowl.
|
|
| 51.7.11
|
A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot.
|
|
| 57.3.11
|
Fragment of a female head from large figurine, hollow inside.
|
|
| 61.6.1.13
|
Fragment of a large jar.
|
|
| 61.6.1.8
|
Ovaloid jug with a small mouth, a long neck flaring to a large body, and tapering again to a small, plain base; fat, rounded handle.
|
|
| 67.6.3
|
Hollow, large opening in back and hole in base. Back of figurine is left unformed.
|
|
| 78.12.1
|
Deep circular body, almost flat shoulder, leading to a deep concave discus with two small holes, the frontal one is slightly off centre. Very small rounded nozzle with a large circular wick hole. Vertical handle opposite the nozzle, flat base with no delineation.
|
|
| 78.12.12
|
Shallow circular body with large concave discus, filling hole is small and off centre on the discus. Medium nozzle has concave sided with a rounded tip, wick hole is circular and central at the end of the nozzle. Base is flat and delineated
|
|
| 78.12.13
|
Deep circular body , concave discus with a central filling hole. Medium, flat nozzle with concave sides, a splayed, rounded tip, large circular wick hole, just off centre. Flat circular delineated base.
|
|
| 78.12.14
|
Circular body with a gradual concave discus with a filling hole in the centre. Flat medium nozzle with concave sides and a rounded tip with a large circular wick hole in the centre. Small circular, unmarked base, very slightly concave.
|
|
| 78.12.16
|
Deep circular body with a rounded shoulder terminating in a large filling hole. Long rounded nozzle titling slightly upwards, irregular rounded tip and an oval wick hole. Large splayed foot. Small vertical lug on the right hand side.
|
|
| 78.12.5
|
Shallow circular body, slight shoulder leading to a large concave discus with a filling hole on the central axis, but further forward. Medium nozzle with concave sides leading to a rounded tip with a circular wick hole. Delineated base, slightly concave. Vertical band around the edge of the whole lamp, probably from joining.
|
|
| 78.12.6
|
Shallow circular body with slightly concave discus with small circular filling hole and a shallow circular base. Short flat nozzle with concave sides and a rounded tip, large circular wick hole.
|
|
| 78.12.9
|
Large, deep, circular body, small convex shoulder, concave discus with a small filling hole at the center. Medium flat nozzle (broken) concave sides with a small air hole at the base of the nozzle, the start of a rounded tip with a circular wick hole. Space for handle. Circular flat delineated base.
|
|
| 79.1.10
|
Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle.
|
|
| 79.1.11
|
Spreading circular body with long flat nozzle and large oval wick hole and rounded tip. Slight anomaly on the underside of the nozzle. Handle is missing. Flat base with no foot, wheel marks.
|
|
| 79.1.13
|
Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot.
|
|
| 79.1.14
|
large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
|
|
| 79.1.2
|
Deep circular body with a large circular filling hole in the centre of the discus. Flat long nozzle with a small circular wick hole and a rounded tip. Circular raised foot, slightly concave with a ring in the middle. "Kick" on the inside at the bottom of the reservoir.
|
|
| 79.1.3
|
Circular deep body with slightly concave discus, large filling hole and a shoulder lug on the right hand side. Flat nozzle, small oval wick hole. Shallow circular foot, slightly concave with a smaller circle within the foot.
|
|
| 79.1.4
|
Small Circular body with a convex shoulder and a small flat discus with a large filling hole. Small lug on right hand side with dent in the top, this however does not reach through to the bottom. Flat long nozzle, slightly concave sides with a splayed tip and an oval wick hole. Small circular concave foot.
|
|
| 79.1.5
|
Circular body with convex shoulder and a concave discus with small filling hole. Small raised protruding foot with flat base. Large vertical handle with one incised line along the length of it and a second band laying across the handle at the highest point, also with an incision along it. Long spout with irregular splayed tip, large oval wick hole. joining lines of the handle and the nozzle are apparent.
|
|
| 79.1.7
|
Shallow circular body. Flat nozzle with concave sides, large round wick hole and a rounded tip. Concave discus and wide ring base. Small filling hole, just off centre probably due to decoration.
|
|
| 79.1.9
|
Deep circular body, small concave shoulder leading to large filling hole. Flat long nozzle with concave sides, a splayed tip and an irregular oval shaped wick hole. Large circular straight sided foot with a concave base.
|
|
| 80.7.1
|
Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs.
|
|
| E.47.1
|
Circular body with small sunken discus with small filing hole, large raised sholder. Long flat nozzle with a splayed end and a curved tip and oval smoke hole. Small ring base.
|
|
| E.62.56
|
Poppy flask, with a fat body, long bottle neck with spreading lip, large handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.412, from Abydos (Base-ring I Ware)
|
|
| E.62.60
|
Large mouth, no neck, three handles for string, widest part is mid-way down the body, flat base.
|
|
| E.63.24
|
Wide necked jar with a large lip and a small neck.
|
|
| REDMG:1935.87.24
|
Convex and large. The vessel has an incurving rim, very convex outside and well marked off from rest of bowl. The transition from bowl to and from stem to foot is an unbroken curve.
|
|
| REDMG:1935.87.8
|
Convex and large
|
|
| REDMG:1947.13.1
|
Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
|
|
| REDMG:1951.132.1
|
Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface.
The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209).
|
|
| REDMG:1951.159.1
|
Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original).
|
|
| REDMG:1951.160.1
|
Large krater with everted mouth and downturned rim, two recurved horizontal round handles attached to the upper part of the cylindrical body, which narrows to ashort, broad stem that curves into a pedestal foot, with a recessed band above slightly tapering sides, hollowed within.
|
|
| REDMG:1953.25.104
|
Male head, with oval eyes, large nose and faint smile.
|
|
| REDMG:1953.25.14
|
Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
|
|
| REDMG:1953.25.77
|
Large circular, deep body, flat shoulder, slightly raised, concave discus with a small filling hole in the centre. the beginnings of two nozzles, both sided are concave with large decorative features protruding from either side. Base of handle remains with half of the hole left. Ring base, slightly concave.
|
|
| REDMG:1953.25.78
|
Circular shallow body, concave shoulder leading to a large filling hole. Beginnings of a band handle. Wide shallow nozzle tilts slightly upwards, large oval wick hole. flat unlimited base.
|
|
| REDMG:1953.25.79
|
Small Circular body, convex shoulder, rim of large central filling hole is concave. Large slightly raised nozzle, rounded tip with a large oval wick hole, slightly irregular underside to nozzle. Small straight sided circular foot with a flat base. Slight anomaly at the bottom of the reservoir in the centre.
|
|
| REDMG:1953.25.86
|
Fragment. Head of woman. Hair centrally parted, waves and ringlets hanging over and below ears. Stephane and veil. Neck with Venus rings. Large eyes.
|
|
| REDMG:1964.1601
|
Circular deep body with small shallow nozzle which is slightly up turned at the tip. Large oval wick hole, filing hole is wide and circular, there is no discus. Ribbon handle around the back of the lamp, attaching to the shoulder in two places. Small, slightly uneven foot with a flat base slighitly carrinated.
|
|
| REDMG:1964.1603.1
|
Circular deep body with lower body wider than the upper. Flat , slightly concave rim to a large circular filling hole. nozzle is long and flat with small oval wick hole at the tip and a small depression at the end of the tip. Base is flat and circular, wheel or wire marks still exist on the base. Band handle is attached across the back of the lamp.
|
|
| REDMG:1964.1604.1
|
Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression.
|
|
| REDMG:1964.1605.1
|
Small Circular body, convex shoulder, rim of large central filling hole is concave. Large flat nozzle, rounded tip with a large oval wick hole. Small slightly splayed circular foot. Slight anomaly at the bottom of the reservoir.
|
|
| REDMG:1964.1606
|
Small circular body with wick hole almost in the shoulder, just protruding slightly to form a lip. Large circular filling hole, small oval wick hole. raised circular foot with rough edge. At the bottom of the reservoir is a lump, probably from the patrix ?
|
|
| REDMG:1964.1607.1
|
Very small almost circular body, convex shoulder with large circular filling hole. Nozzle affects the circular shape of the body, almost forming a lip to the lamp, oval wick hole is pierced though lip and shoulder. Large circular foot, base is unturned and has wire cutting marks. Small kick in the base of the interior.
|
|
| REDMG:1964.1608.1
|
Small circular body, convex shoulder, concave rim leading to a large circular, central filling hole. Flat long nozzle with slightly down-turned oval wick hole and a rounded tip. Small circular strait sided foot with flat base.
|
|
| REDMG:1964.1609.1
|
Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
|
|
| REDMG:1964.1612.1
|
Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle is smooth and cylindrical with one side deeper than the other. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small slightly of centre foot is circular and has a concave base. Kick on the interior of the base.
|
|
| REDMG:1964.1613.1
|
Circular shallow body with rounded convex shoulder leading to a concave discus with two small filling/air holes along a central axis. Nozzle is of an average length with a rounded wick hole. large un-pierced pinched vertical handle, small circular, slightly concave demarcated base.
|
|
| REDMG:1964.1615.1
|
Circular deep body, convex shoulder, small circular concave discus with reasonably large central filling hole. Small rounded nozzle with a medium sized flat, circular wick hole, at base of nozzle there appears to be a small air hole. Flat vertical handle with circular piercing through it. Handle is high above the body and reaches down towards the base. Base is circular and flat, it is delineated by two moulded bands.
|
|
| REDMG:1964.1616.1
|
Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable.
|
|
| REDMG:1964.1617.1
|
Circular shallow body, concave shoulder with large circular filling hole. Flat, slightly upward tilting nozzle narrowing towards the rounded tip; large oval wick hole. Beginnings of a band handle. Base not outlined, very slightly concave.
|
|
| REDMG:1964.1618.1
|
Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle has concave sides, tip is splayed, large oval wick hole. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small foot is circular and has a concave base very small kick on the interior of the base.
|
|
| REDMG:1964.1619.1
|
Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base.
|
|
| REDMG:1964.1647
|
Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
|
|
| TEMP.2003.7.42
|
Large curved fragment
|
|
| temp.2022.7.4
|
terracotta jug with rounded body, flat base and large neck; the handle is from the upper part of the neck to the upper part of the body, between the neck and the body there is a groove. There are seven fragment of the neck inside the jar.
|
|