Ure Museum Database



Browse
There are 40 objects for which Shape_description contains → knob
26.4.1A-B Lid: central 'pagoda-like' knob. Pyxis: feet are grooved horizontally; raised base is slightly convex.
26.4.3 Minature. Lid has tall knob.
27.3.2 Bottom flat and unpainted with rough knob in centre.
30.11.3 Tall, acorn shaped knob; gently sloping lid with vertical rim; underside impressed with faint spiral.
34.10.11 Rounded body narrowing toward base. Small round handle. Spout protruding from the top. Lid with round knob handle.
34.10.12 Top closed, perforated with two concentric rings of holes (six inner, nine outer) around pointed knob.
34.10.8 Short cylindrical knob, with grooved flat top, grooved profile, and conical stem broadening to the slightly domed top of the lid. At the midpoint of the lid, beyond a gentle groove and a ridge, the lid flares to a rounded edge, the underside of which narrows to a tapering straight sided walls that would have sat inside the vase to which it belonged (perhaps a stamnos). The underside of the lid is hollowed, rounded, and smooth.
45.10.4 Central, circular knob handle, with flat top and inset rim.
45.6.20 Round knob, fragment from lid of lekanis or pyxis, with stem. Knob formed of flat top, with inset circle, depressed centre; profile in two parts, convex on upper part, flat and vertical below; flat underside, offset from short cylindrical stem.
45.6.22 Groove around base of knob, but knob is missing.
46.5.1A-B Matching lid with knob. The body has lugs on shoulder close to handle and projections on the tops of handles.
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle.
47.2.21 Bell, with a rounded lower edge, narrowing sharply and then tapering slowly to a rounded shoulder, where it is attached to a round knob, hollowed on one side, thickened on the other, pierced with a hole; there is another hole in the top of the bell, just below the hollowed part of the knob. A hand-modeled striking ball is attached, with a thin piece of jute string, knotted through the top hole and lowered through the bottom hole.
56.8.5 Conical, almost acorn shaped knob sits on rounded ring; lid curves down to a ridge; broad, flat edge
58.2.3B Lid: flat rim, domed interior, surmounted by cylindrical knob with two ridges and concave upper surface. Belongs to pyxis, 58.2.3A
60.1.4A-B Pyxis: inverted rim slightly hanging over bulbous body; small, ring torus foot above a slight groove; convex underside Lid: Gently slopes up to stem and donut shaped knob.
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section.
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim.
68.12.2 Short cylindrical knob, flat-topped and double-recessed in centre. The short concave stem connects the cylinder to the short domed lid, in a continuous curve. Beyond a gouge the outer 1.8 cm of the lid becomes slightly concave and after two ridges terminates in a slightly rounded edge.The underside is hollowed just below the knob, and has a short flange intended to sits inside the rim of the pyxis to which it would have belonged.
68.12.3 Pomegranate shaped knob, with small hole in the recess at the top, smoothly attached to a short stem, slightly concave, that spreads to a short domed lid, which in turn spreads to a flat rim with sharp beveled edge, slightly thicker underside, smoothly turned to a tapered flange with a rounded edge. Hollowed, round, smooth underside.
73.10.1 Tall knob, circular in section, flat at top except for a grooved section; knob which narrows then widens to a carination towards the bottom, and narrows again to the join with the concave lid. Flanged rim.
E.62.40 Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall.
E.62.44 Lid is oval with a central circular knob and traces of an incised band on top. (Lid is missing!) Body has a flat rim, same shape and size as lid so they sit together, but with a central circular opening. Thin neck leading to shoulders. Four oblong feet at each 'corner' and the base between is flat. Flat rim on top of body is reserved. The inside is a cylindrical well, not matching the contours or shape of the outside. Heavy object.
L.2011.1.10 Circular pot fragment, maybe a knob, broken at the junction with the lid.
L.2011.1.13 Central circular knob, with a round tip and a sort of carination in the edge, hollow in the underneath; rounded rim, hollow inside, connected to the knob by a quite sloping lid.
L.2011.1.46 Flat circular knob, with a circular dip in the centre of the tip. In the underneath small flange.
L.2011.1.47 Knob and the upper part of the lid. No stem, ridge in the upper part of the knob, flat tip. Hollow in the underneath.
L.2011.1.49 Lid fragment, with a flat circular knob, a cylindrical stem, and steep lid.
L.2016.3.7 Heavy Alabaster lid with slightly uneven rounded knob, which leads to a short stem. The stem curves into the diagonal lid with rounded rim and short, broad flange, slightly narrowing to its bottom. The underside is concave at centre.
REDMG:1951.135.1-2 Pyxis: Flanged rim widening to sharply curved shoulder, rounded below, and tapering to a flat base; round horizontal handles on either side pressed up against rim to form lugs. Lid: cylindrical knob attached to a disk.
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim.
REDMG:1951.137.1 Moulded knob, topped by beveled element with inset circle on upper surface; concave stem, attached to a nearly flat lid, with a moulded flange on the underside, slightly concave at centre.
REDMG:1951.138.1 Moulded rounded (‘mushroom’) knob, topped by beveled disk with inset circle, conical indentation on upper surface, surrounded by a groove; cylindrical stem offset from a to a slightly diagonal lid, with a moulded flange on the underside, concave at centre.
REDMG:1951.139.1 Moulded knob, topped by a slightly rounded element with inset circle and conical indentation, on upper surface; lower part of knob curves into a nearly cylindrical stem offset from a diagonal lid, with a tapered lip, with a plain rim.
REDMG:1953.25.18 Flat disc molded into tricorn lid, with small cylindrical knob at centre.
REDMG:1953.25.19 Trefoil lid with a small knob.
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim.
REDMG:1953.25.67 Nearly flat lid, with rounded rim, curving into a deep thin flange, whereby lid would have sat probably within the pyxis; button knob at centre.
REDMG:1953.25.68 Sloping lid above slightly tapered flange with a rounded rim; flat-topped knob, with sloping sides, at centre.
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim.
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH