| 26.7.2
|
The handles are riddled, of ellipsoid cross-section and incurving. The stem is high and thick and the foot is disk-shaped, while the concave area of the base forms a conical center.
|
|
| 28.9.1
|
Mouth flares out and rim is flat. High vertical handle joined to rim with surs either side. Body has two horizontal handles. Base has central convex circle.
|
|
| 34.10.7
|
Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim.
|
|
| 34.8.12
|
The lid is three-stepped, with a flat disk-shaped surface on top of which there are two, concentric, conical areas and the handle, which is pear-shaped, with a button-like ending. The body is amphi-conical? But the upper surface is rounder and of a smaller diameter. The stem is slim and high, the foot is three-stepped and its bottom is a larger ring-shaped surface. Underneath, the surface is concave and conical.
|
|
| 38.4.1
|
Two high handles, one on each side; moulded ridge at base of design; thin foot is black on the underside which is conical.
|
|
| 45.10.1
|
High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
|
|
| 45.6.26
|
Shallow with incurved rim, round body on a high stem and a ring in centre of stem. Convex foot with a central groove and flat resting surface except for central concave circle.
|
|
| 45.6.34
|
Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi).
|
|
| 48.12.2
|
Deep bowl (corresponds to FS [='Furumark Shape'] 285). The shape seems somewhat less deep than most published deep bowls. The best comparison to be found is in Mountjoy 1999, 1.189 Argolid no. 447, from Asine, House I, room 46. Bowl of pinkish fabric with flaring lipless rim, concave sides, tapering in lower part to a high ring base (is it conical?). Two horizontal round handles are attached to the side walls.
|
|
| 48.5.3
|
Tall jug with rounded rim, cylindrical neck, piriform body, and high arching loop handle that rises from the rim.
|
|
| 49.8.8
|
Trefoil lip; large handle with high sides making central channel curves up from rim, then down to top of body; bulbous body; small, flat base with central sunken disk
|
|
| 50.4.8
|
Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder.
|
|
| 50.5.5
|
Large krater with wide, downturned rim that extends sharply from the top of the body; two upcurving handles high on the body, which narrows to a short, cylindrical stem; hollowed pedestal foot, ridged just below the top of the foot. The resting surface is concave and the underside undulates smoothly up to the bottom of the bowl.
|
|
| 51.7.1
|
Trefoil lipped; high handle with ridge down middle curves up from the shoulder considerably higher than the rim; neck progresses smoothly to body, as body does to foot; foot is stepped with the side reserved; underneath is ruddled and concave with convex centre.
|
|
| 51.7.11
|
A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot.
|
|
| 51.7.2
|
Lid: slightly convex top with circular groove (1.9 cm diam.) at the centre, overhanging a cylindrical body, with straight sides, terminating in a rounded rim at bottom. Pyxis: high cylindrical body with straight sides and simple rounded rim sits atop a flanged element, with rounded edges, that slopes sharply to a foot ring with tapered interior edge and rounded resting surface.
|
|
| 53.8.2
|
Rounded rim; steep angled wall; slightly sloping floor continuously curving to the stemmed foot with a high trumpet-shaped base below moulding. Offset on interior at join of wall and floor. Base mostly flat but conical at the centre. Cf. Toronto, Royal Ontario Museum 918.3.72: Hayes 1984, 100 no. C67 (ill.)
|
|
| 56.8.2
|
Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug.
|
|
| 56.8.4
|
Shape 1; trefoil-lip joining at the back to a high curving vertical strap handle, which joins at the shoulder; ring base.
|
|
| 60.1.5
|
Bell-shaped mouth with high outturned rim and broad, slightly convex lip;long neck widens to shoulder with smooth contour to ovoid body; vertical strap handle rising from top of neck and rejoining at bottom of shoulder; short ring foot.
|
|
| 62.10.1
|
Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim.
|
|
| 85.3.1
|
High, vertical sided neck joins sharply at shoulder with bulbous body; two-stepped base, bottom step rounded; concave base.
|
|
| REDMG:1934.53.4
|
Broad flaring lip, convex on the upper surface, with a downturned rim, offset from a concave shallow bowl; hollow high stem offset from plate but spreading at the bottom into a disk foot, hollowed on the interior.
|
|
| REDMG:1934.53.5
|
Belly-handled jar. High outturned rim narrowing to a short neck; ovoid body, in the centre of which are attached two vertical round handles, canted; flat base, slightly concave. Cf. larger examples of this shape are in Toronto, Royal Ontario Museum 918.3.77 (Hayes 1984, 47, no. B29, ill.) and Orvieto, Querce inv. 398 (Camporeale 1970, 126 no. 136, fig. 59, pl. 32b).
|
|
| REDMG:1942.5.6.2
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1951.146
|
Plain rim, concave sides, high ring foot; two horizontal round handles, canted slightly up, just below rim.
|
|
| REDMG:1951.147.1
|
Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
|
|
| REDMG:1951.157.1
|
Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
|
|
| REDMG:1953.25.13
|
Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
|
|
| REDMG:1953.25.14
|
Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
|
|
| REDMG:1953.25.15
|
Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
|
|
| REDMG:1953.25.17
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1953.25.20
|
Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
|
|
| REDMG:1953.25.30
|
White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
|
|
| REDMG:1953.25.48
|
Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.50
|
Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1953.25.59
|
Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
|
|
| REDMG:1958.113.1
|
Ovoid aryballos, with a rounded mouth (now broken), small round vertical handle reaching from just below the mouth to the bottom of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, bossed on the underside.
|
|
| REDMG:1958.117.1
|
Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination.
|
|
| REDMG:1964.1612.1
|
Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle is smooth and cylindrical with one side deeper than the other. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small slightly of centre foot is circular and has a concave base. Kick on the interior of the base.
|
|
| REDMG:1964.1614.1
|
Deep circular body, nearly straight convex shoulder and a deep concave discus with a small filling hole at the centre. Nozzle was flat and had a small round wick hole and probably a rounded tip. high vertical handle reaching down towards the base, circular piercing through the handle. Circular base is demarcated with a single line and is very slightly concave.
|
|
| REDMG:1964.1615.1
|
Circular deep body, convex shoulder, small circular concave discus with reasonably large central filling hole. Small rounded nozzle with a medium sized flat, circular wick hole, at base of nozzle there appears to be a small air hole. Flat vertical handle with circular piercing through it. Handle is high above the body and reaches down towards the base. Base is circular and flat, it is delineated by two moulded bands.
|
|
| REDMG:1964.1618.1
|
Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle has concave sides, tip is splayed, large oval wick hole. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small foot is circular and has a concave base very small kick on the interior of the base.
|
|
| REDMG:1964.1620
|
Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled.
|
|
| REDMG:1964.1624
|
Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base.
|
|
| REDMG:1964.1625
|
Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside.
|
|
| REDMG:1964.1647
|
Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
|
|
| REDMG:1997.209.3
|
Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
|
|