| 13.10.3
|
Nearly rectangular piece, bilaterally symmetrical, with a raised rib down the centre, two parallel rivets, one on either side, at the shoulder, just above the tang (where the blade may have been socketed into a wooden handle. The thickness is uniform for most of the length of the dagger. )
|
|
| 2006.12.91
|
Small vessel like a flat bottomed alabastron, unlikely to have been functional
|
|
| 2006.12.93
|
Very small open vessel with single handle, another handle has been broken off. Size suggests unlikely to have been functional.
|
|
| 2006.12.94
|
Very small veseel or lid of some sort, unlikely to have been functional. Two small handle like protrusions.
|
|
| 2006.12.95
|
Shaped like a very small aryballos, but seems unlikely to have been functional.
|
|
| 2006.12.96
|
Very small vessel like a flat bottomed alabastron, probably too small to have been functional
|
|
| 2006.12.98
|
Very small vessel, unlikely to have been functional
|
|
| 2006.12.99
|
Very small vessel, unlikely to have been functional. Flat bottomed
|
|
| 2007.4.50
|
Fragment from rim, possibly used to have handle attached
|
|
| 2018.6.1
|
A writing tablet, with bored holes that evidence the hinge whereby it was once attached, with a cord, to a second tablet. It was once inlaid with a wax surface, within a rectangular frame, on which the writer would have scratched words with a stylus. The wax has worn away or been removed from our tablet, whereupon each side was painted white, on which ancient Greek words were written.
|
|
| 2022.7.8.a
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.b
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.c
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.d
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.e
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.f
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.g
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.h
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.i
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.l
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 2022.7.8.m
|
a column krater is a large, open-mouthed bowl used for mixing wine with water. There are only eleven fragments of this krater, three of them are from the base, the base is thick and wide, made with one big ring and two smaller rings, the body (even if absent) would have been with a round belly; two fragments are from the mouth of the krater, thick and wide rim with flat top
|
|
| 23.11.31E
|
Profile figure facing left wearing a helmet and holding a shield with bike spokes formation. Appears to have once held a spear. Two prominent wide legs emerge from underneath the shield. Lead is an off-colour brown-grey.
|
|
| 25.4.2
|
Four-handled. Kylix style, stemmed and hollow inside stem. Handles round. At halfway points between handles are two more sets of handles but these have broken off.
|
|
| 26.7.13
|
Rhomboid in section at the base, and curving towards the point; three protrusions at the base would have been used to secure the arrowhead to the shaft.
|
|
| 29.5.5
|
Handles move straight out horizontal to the body and both have small horns either side.
|
|
| 34.10.8
|
Short cylindrical knob, with grooved flat top, grooved profile, and conical stem broadening to the slightly domed top of the lid. At the midpoint of the lid, beyond a gentle groove and a ridge, the lid flares to a rounded edge, the underside of which narrows to a tapering straight sided walls that would have sat inside the vase to which it belonged (perhaps a stamnos). The underside of the lid is hollowed, rounded, and smooth.
|
|
| 45.6.34
|
Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi).
|
|
| 47.2.27
|
Cylindrical figure of a warrior. Pointed helmet, moulded face with long beard. Arms across chest, right carries shield, may have also held a spear, although now damaged.
|
|
| 48.4.1
|
Two holes for suspension have been pierced below the flat rim.
|
|
| 49.8.1
|
Unusual form; neck and body are identical to a shape 8M oinochoe (mug) in Boston, Museum of Fine Arts 22.632 (Padgett 1993, 211 no. 142, ill.), as if a fancier rim, handle, and lower part of the foot have been added to this piece.
|
|
| 50.5.1
|
Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised.
|
|
| 59.2.2-3
|
Two white stone (possibly steatite) scarabs in a small glass specimen jar with cork top. Both examples have incised beetle features including clypeus and legs. Undersides both engraved with hieroglyphs and have longitudinal holes for threading.
|
|
| 68.12.2
|
Short cylindrical knob, flat-topped and double-recessed in centre. The short concave stem connects the cylinder to the short domed lid, in a continuous curve. Beyond a gouge the outer 1.8 cm of the lid becomes slightly concave and after two ridges terminates in a slightly rounded edge.The underside is hollowed just below the knob, and has a short flange intended to sits inside the rim of the pyxis to which it would have belonged.
|
|
| 77.5.1.1-17
|
Seventeen fragments from the same Nikosthenic amphora. 1) Should be rejoined to 2. Part of the body. There is white plaster on both surfaces . 2) Should be rejoined to 1. Part of the body. There are traces of plaster on both sides and adhesives. 3) Part of the body. White plaster and adhesives on both sides. 4) Part of the body. White plaster on both sides and adhesives. 5) Should be rejoined to 6. Part of the body. Adhesives. 6) Should be rejoined to 5. Part of the body. Exterior: There are areas that have been chipped off and few bits that have been pitted off. Interior: There is a layer of white plaster. 7) Could be rejoined to 8? Part of the body. There are bits that have been pitted off on the exterior and the interior is covered with plaster and adhesives. 8) Could be rejoined to 7? Part of the body. White plaster and adhesives on the interior and traces of plaster on the exterior, where there are also bits that have been pitted off. 9) Should be rejoined to 10. Part of the body. White plaster on both surfaces. 10) Should be rejoined to 9. Part of the body. The interior is covered with white plaster and there are traces of it on the exterior. 11) Should be rejoined to 12. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 12) Should be rejoined to 11. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 13) Should be rejoined to 14. Part of the neck. There are traces of white plaster on the interior. Many bits have been pitted off from boith surfaces. 14) Should be rejoined to 13 and 15. Part of the neck. There are traces of plaster and adhesives on both sides, as well as many bits that have been pitted off. 15) Should be rejoined to 14. Part of the neck. There are traces of white plaster on both surfaces, as well as adhesives. There are few scratches on the exterior and several bits that have been pitted off, especially from the interior. 16) Part of the body. Adhesives and traces of white plaster. There are areas on the exterior, where the colour appears to have been peeled off and some pitting off. 17) Bit of white plaster-part of rim? and covered with adhesives.
|
|
| E.23.45
|
Small tweezers with a loop on one end, originally loose in the hinge for hanging. Tweezers are made from three pieces, a central straight but shorter section and two longer but curved inwards sections which would have been the pieces that would have bent together to hold the hair or splinter.
|
|
| E.47.6.9
|
Undulating pie-crust mouth (probably hand molded). The body is globular and the base is rounded, with a small part flattened. The base presents the finger marks of the potter. It seems to have been suspended by a string around the neck (attached).
|
|
| E.65.11
|
Not perfectly round but still circular. Widest from side to side. Has a rectangular extension at base so that the object would have sat in the handle. Flat and thin with slightly sloped edges to avoid making them sharp.
|
|
| E.65.6
|
Long, thin ornament from a coffin lid: the centre appears to have a kind of knot carved into it with three ridges on either side of this.
|
|
| REDMG:1935.87.32
|
Column krater. The handles have two bars of a cylindrical cross-section and adjoin in a square at the rim, having side-surfaces above the bars. The foot is in the shape of an inverted echinus, a cylindrical stand widening towards the bottom. There is also a plastic ring just below the lowest part of the body.
|
|
| REDMG:1935.87.6
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
|
|
| REDMG:1953.25.103
|
Moulded female figurine with extended arms, wearing headdress. Flat, roughly worked back. Arm position suggests she may have been a singer, forming parts of a ring and is now broken from her base.
|
|
| REDMG:1953.25.40
|
Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface.
|
|
| REDMG:1953.25.67
|
Nearly flat lid, with rounded rim, curving into a deep thin flange, whereby lid would have sat probably within the pyxis; button knob at centre.
|
|
| TEMP.2005.1.5
|
Neck and top section of the body. Top appears to have squared area; perhaps where a handle was connected.
|
|
| temp.2014.12.1
|
the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, a pouring spout and a bigger filling aperture; a single handle from the middle of the neck to the upper part of the body.
|
|
| temp.2022.7.3
|
the shape is similar to an askos (a jar used to pour wine or olive oil but askoi generally have a pouring spout wider and parallel to the handle, and they are very often zoomorphic), this is a cruet for daily use. Rounded body jar with flat base, rounded neck to insert the oil, a pouring spout in the upper body to pour the olive oil; solid handle from the middle of the neck to the upper part of the body.
|
|