13.10.10
|
Fragment. Neck and → handle ← of vase.
|
|
13.10.12
|
Body almost cylindrical, pointed at bottom. Short neck, trefoil lip, → handle ← that joins the shoulder an the lip.
|
|
13.10.17
|
Barrel-shaped jug, deep-spreading lip, half has broken away. One → handle ←, with a raised area along the middle. Clay on body rounded into a point i |
|
13.10.21
|
Course jug with fat body, thick rim. The single → handle ← reaches from the neck beneath the rim to the shoulder of the jug. The ne |
|
13.10.22
|
Fat Body, narrow neck leading to an out turned rim. One → handle ← joins the shoulder of the vase to the neck directly beneath the rim. Low |
|
13.10.3
|
lder, just above the tang (where the blade may have been socketed into a wooden → handle ←. The thickness is uniform for most of the length of the dagger. )
|
|
14.9.1
|
Deep bowl with slightly pinched in, uneven rim; wishbone → handle ←; body tapers to flat base. Typical Late Middle II-Cypriot I shape (perhap |
|
14.9.2
|
Fat body, long bottle neck with spreading lip, large U-shaped → handle ←. Two moulded rings round neck at junction with → handle ←. Foot conical. Cf. |
|
14.9.3
|
Alabastron-shaped jug with one → handle ← that joins the rim to the upper body and a delineated flat base.
|
|
14.9.52
|
Two fragments forming an irregular shaped piece from → handle ← zone of three-→ handle ←d jar, with the stump of broken → handle ←.
|
|
14.9.64
|
Rectangular with base of → handle ← sticking out near top.
|
|
14.9.74
|
Fragment; Body sherd of Chian Wild Goat Style pottery chalice with → handle ← root;
|
|
2003.6.19
|
Single fragment from near the attachment of a → handle ←.
|
|
2005.3.35
|
Fragment of bird kylix rim and → handle ←
|
|
2005.3.36
|
Fragment of a bird kylix → handle ← and rim
|
|
2006.12.101
|
Small vessel with two very small → handle ← like protrusions
|
|
2006.12.103
|
4 small protrusions, roughly evenly spaced. 2 seem to be from a broken → handle ←.
|
|
2006.12.104
|
Fragment of small vessel with base, body and one → handle ←.
|
|
2006.12.105
|
Fragment of rim with part of a → handle ←
|
|
2006.12.112
|
Fragment of base or stand of vessel, with → handle ← attached
|
|
2006.12.113
|
Fragment with part of → handle ←
|
|
2006.12.115
|
Fragment with part of broken → handle ←
|
|
2006.12.122
|
Fragment with stub of → handle ←
|
|
2006.12.125
|
Fragment possibly of → handle ←; long thin shap which branches into two thinner broken, curved projection |
|
2006.12.16
|
Fragment of → handle ←
|
|
2006.12.18
|
Fragment of rim; with → handle ← previously attached
|
|
2006.12.19
|
Fragment of → handle ←
|
|
2006.12.20
|
Fragment of rim or lid with part of → handle ←
|
|
2006.12.32
|
Two bumps possibly from broken → handle ←
|
|
2006.12.66
|
Fragment with → handle ← attached
|
|
2006.12.67
|
Fragment with → handle ←
|
|
2006.12.7
|
Fragment of rim, possibly with broken off → handle ←
|
|
2006.12.93
|
Very small open vessel with single → handle ←, another → handle ← has been broken off. Size suggests unlikely to have been |
|
2006.12.94
|
y small veseel or lid of some sort, unlikely to have been functional. Two small → handle ← like protrusions.
|
|
2006.12.97
|
Small, shallow vessel with → handle ←, possibly originally had a second → handle ← that has since been lost.
|
|
2007.2.11
|
Base of a → handle ←.
|
|
2007.2.153
|
→ handle ← of vessel
|
|
2007.2.160
|
→ handle ← of Vessel.
|
|
2007.2.84
|
→ handle ← of Vessel.
|
|
2007.4.103
|
Fragment of → handle ←
|
|
2007.4.106
|
Fragment is possibly part of a → handle ←
|
|
2007.4.108
|
Small vessel with → handle ←, could be lid of some sort
|
|
2007.4.116
|
Fragment of rim with part of → handle ← attached
|
|
2007.4.117
|
Shape suggests fragment of rim with part of → handle ← still attached
|
|
2007.4.124
|
Fragment with part of broken → handle ←
|
|
2007.4.132
|
Fragment from → handle ←
|
|
2007.4.148
|
Fragment of → handle ←
|
|
2007.4.15
|
Perhaps a → handle ←
|
|
2007.4.166
|
Shard of a pot → handle ←: curved
|
|
2007.4.17
|
Perhaps from a → handle ←, or rim.
|
|
2007.4.175
|
Curved pot shard- part of → handle ← coming off
|
|
2007.4.181
|
Curved pot shard with a → handle ←
|
|
2007.4.197
|
Fragment of corded → handle ←
|
|
2007.4.201
|
Fragment with small part of rim and broken → handle ← attached
|
|
2007.4.215
|
Fragment from side of pot, but with very end of → handle ← attached
|
|
2007.4.25
|
Fragment of → handle ←
|
|
2007.4.26
|
Fragment from → handle ←
|
|
2007.4.34
|
Fragment, possibly → handle ←
|
|
2007.4.42
|
Fragment from → handle ←
|
|
2007.4.44
|
Fragment from → handle ←
|
|
2007.4.50
|
Fragment from rim, possibly used to have → handle ← attached
|
|
2007.4.52
|
Fragment from base of → handle ←
|
|
2007.4.71
|
Fragment of → handle ← with bit of rim
|
|
2007.4.74
|
Fragment with part of → handle ←
|
|
2007.4.79
|
Part of large → handle ← ?
|
|
2007.4.81
|
Fragment with part of → handle ←
|
|
2007.4.82
|
Fragment of → handle ←
|
|
2007.4.83
|
Fragment of a → handle ←
|
|
2007.4.88
|
Fragment of → handle ←
|
|
2007.4.94
|
Axe head like shape, could be broken off → handle ←
|
|
2008.7.1
|
U-shaped strap → handle ← attached to a rim fragment
|
|
2008.7.101
|
Part of neck, → handle ←, shoulder, body
|
|
2008.7.116
|
Hexagonal shaped fragment with remnants of rim; remnants of → handle ← base on exterior
|
|
2008.7.121
|
Triangular shaped → handle ← fragment
|
|
2008.7.123
|
Trapzoidal fragment with a small pierced cylindrical → handle ← on the rim (for string?)
|
|
2008.7.130
|
r of fragment. Almost a long pyramid in shape, with a curved base.Small rounded → handle ← on one broken edge.
|
|
2008.7.135
|
Rim fragment with → handle ←; exterior has a → handle ← with a hole through it, possibly to put string thr |
|
2008.7.158
|
Trapezoidal curved → handle ← fragment.
|
|
2008.7.160
|
→ handle ← fragment
|
|
2008.7.29
|
Narrow thin → handle ← fragment.
|
|
2008.7.3
|
angular fragment thicker at one end and curved sharply at the other. Possibly a → handle ← fragment.
|
|
2008.7.35
|
has broken off near the transition from shoulder to body. Possible point where → handle ← was attached
|
|
2008.7.42
|
→ handle ← fragment from possibly near the base of → handle ←
|
|
2008.7.99
|
Gently curving rectangular → handle ← fragment.
|
|
2008.9.35
|
Long narrow → handle ← fragment. Potentially part of the same vessel as fragments: 2008.9.48, 20 |
|
2009.7.99
|
Gently curving rectangular → handle ← fragment.
|
|
2016.3.1
|
xly to the base, and round tip with ovoidal wick hole at centre. Vertical round → handle ←, raising up at rear part of the shoulder.
|
|
2016.5.1
|
bular neck which curves into a globular body with a flat bottom. A narrow strap → handle ← curves to the shoulder. The bottom of the vase has a small flat recess in |
|
2016.5.3
|
Flaring mouth, wide elongated conical neck, separated from a large ovoid |
|
2022.6.3
|
Mouth and neck and one → handle ← of amphora
|
|
22.3.20
|
d overhanging rim in three sections, reaching to the point of attachment of the → handle ← on the front of the fragment.
|
|
22.3.36
|
Fragment part of a pot, likely from the → handle ← near the rim.
|
|
22.3.40
|
turned molded rim, from which projects the horizontal element of a ridged strap → handle ← that curves back in and descends to the shoulder. Body drops sharply from |
|
22.3.42
|
n turned rim. covered flat nozzle with a large oval wick hole. Horizontal band → handle ← which follows the back of the body. Foot is shallow and slightly concave
|
|
22.9.14
|
→ handle ← of vase/jug
|
|
22.9.5
|
Sphere with base and one side → handle ← still present. Only half intact with one side → handle ←. Other → handle ← and s |
|
22.9.7
|
Broad concave rim; short neck flowing into bulbous body; crude, thick strap → handle ← joins body from rim and shoulder; short foot; broad, flat base.
|
|
23.11.40
|
Miniature jug, with one → handle ←
|
|
23.11.41
|
Miniature jug with a broad rim, bulbous body, flat base and no → handle ←
|
|
25.6.3
|
Chimney mouth with flat rim; single curved → handle ←; base has central concave section; foot double stepped.
|
|
25.6.7
|
Rounded → handle ← with small flat part sticking out at part furthest from main pot
|
|
25.8.5
|
The → handle ← is in three tiers, with a point at the tip.
|
|
25.8.6
|
→ handle ← is small and joined from shoulder to neck. Shallow cup mouth.
|
|
25.9.3
|
The rim is wide and sloping, the → handle ← is double, of ellipsoid cross-section and forms an intense curve against |
|
26.12.13
|
Trefoil lip from which a → handle ← curves down to the top of the bulbous body. Deep groove separates body fr |
|
26.12.14
|
Trefoil lip. Strap → handle ← curves down from rim to shoulder. Bulbous body. Resting surface slightly |
|
26.12.19
|
Single curved → handle ←. Foot in two degrees, top; base has central concave section.
|
|
26.12.26
|
Trefoil lip oinochoe with a banded → handle ← that bears a ribbed back. The body is ovaloid and the foot is conical wit |
|
26.12.8
|
Piriform, with a small → handle ←.
|
|
26.2.10
|
Body sherd with trace of → handle ← root of South Ionian pottery cup, possibly an Ionian little-master cup;
|
|
26.2.12
|
Rim sherd of South Ionian pottery cup with everted rim and part of → handle ← root;
|
|
26.2.14
|
Rim and shoulder sherd of East Greek (North Ionian?) pottery cup with part of → handle ← root;
|
|
26.2.15
|
Rim sherd of South Ionian pottery cup with everted rim and part of → handle ← root;
|
|
26.2.4
|
Fragment of mouth, neck, body, and → handle ← of Corinthian black-figured pottery ring-aryballos;
|
|
26.2.50
|
wild Goat Style black-figured pottery closed vessel, amphora or oinochoe, with → handle ← root;
|
|
26.2.57
|
sherd of North Ionian Late Wild Goat Style pottery column-krater, with part of → handle ←;
|
|
26.2.6
|
nded from two fragments) of East Greek (North Ionian) pottery rosette bowl with → handle ←;
|
|
26.2.84
|
Shoulder and → handle ← sherd (mended from two fragments) of probably East Greek pottery closed v |
|
26.2.90
|
Rim sherd of Corinthian black-figured pottery column-krater with part of → handle ← plate and shoulder;
|
|
26.7.8
|
ular filling hole. Long nozzle with a wide, flat, oval wick hole. Applied strip → handle ← attached to the rim and reaching down to the base. Flat unmarked base. T |
|
26.8.1
|
Central vertical → handle ← reaches across middle of vase.
|
|
27.4.1
|
flat resting surface and a slightly convex underside. On either side a u-shaped → handle ←, round in cross-section, rises up from just below the rim, top the height |
|
28.6.1
|
Flat, trefoil mouth with single curved → handle ←.
|
|
28.6.5
|
from the side of the piece, approximately one quarter of the way round from the → handle ←, flaring into mouth.
|
|
28.9.1
|
Mouth flares out and rim is flat. High vertical → handle ← joined to rim with surs either side. Body has two horizontal → handle ←s. Ba |
|
29.11.2
|
th. The top of the rim slightly curving upwards. Cylindrical neck. Strap single → handle ← connecting the beginning of the neck with the shoulder. Shoulder curves s |
|
29.11.3
|
The mouth is chimney-like, the → handle ← banded, the body is conical and the foot is disk-shaped.
|
|
29.11.8
|
sharply to a slightly offset resting surface, slightly concave. A single strap → handle ← curves arches between the walls of the basket on the inside.
|
|
29.5.3
|
Ball aryballos with a disk-shaped wide rim, a vertical banded → handle ← and a spherical body.
|
|
33.4.3
|
The mouth is tall and conical, the back of the → handle ← is inflated and the foot is disk-shaped.
|
|
34.10.10
|
Gill's 'Pheidias shape'. Wide mouth with a flat rim. The → handle ← is in two pieces branching out sideways along the rim at the top. Base i |
|
34.10.11
|
Rounded body narrowing toward base. Small round → handle ←. Spout protruding from the top. Lid with round knob → handle ←.
|
|
34.10.13
|
Squat lekythos. Flared mouth with flat rim. Thin neck with single curved → handle ← attached at top and finishing at shoulder. Ridge separates the neck from |
|
34.10.15
|
Gourd-shaped vessel, with an elongated ovoid body tapering into a cylindrical → handle ← that finally terminates in elongated, rounded tip. Pierced in the bottom |
|
34.10.2
|
Round ('ball aryballos'). Wide flat rim to mouth with thin neck. Single → handle ←.
|
|
34.10.9
|
Hellenistic jug with twisted rope → handle ←. → handle ← extends from shoulder to where grooves are at the top of the ne |
|
34.2.2
|
terior, with a flat resting surface and a pointed underside. The vertical strap → handle ←, slightly concave on its outer side, reaches from the lip to the widest p |
|
34.8.12
|
shaped surface on top of which there are two, concentric, conical areas and the → handle ←, which is pear-shaped, with a button-like ending. The body is amphi-conic |
|
34.8.2
|
ular and thin neck, cup mouth with slightly concave upper surface, there is one → handle ← from the upper part of the body to the lower part of the cup mouth
|
|
34.8.3
|
Flared cup mouth. Single curved → handle ←. Base is slightly concave.
|
|
35.4.2
|
The → handle ← is small and joined from the shoulder to the neck below the mouth and the |
|
35.4.4
|
Trefoil lip oinochoe, with a → handle ← of ellipsoid cross-section that is raised higher than the lip. The body i |
|
37.11.4
|
Type B, formerly called 'glaux'. One horizontal → handle ← and one vertical, both circular. → handle ←s are attached just below rim whi |
|
37.11.7
|
ing mouth and wide neck separated from body by a moulded groove. Single curved → handle ← starting at groove and bending to lip. Small foot, base slightly concave |
|
37.11.8
|
The vessel has a rope → handle ← at its back with a rotella (connects to the rim with a bit that looks lik |
|
38.4.4
|
Ladle with one → handle ← and spout in side.
|
|
38.4.5
|
Hand-made, body is wider towards the base, base is flatened. Neck and → handle ← are missing. Small flat lug (mini → handle ←) on either side of the missing |
|
38.4.7
|
One vertical and two horizontal → handle ←s. Mouth tapers to long, wide neck. Vertical → handle ← from top of shoulder |
|
44.1.1
|
Ring-shaped aryballos. The rim is disk-shaped, the → handle ← is banded and the body is inflated and there is no base.
|
|
44.6.1
|
Donut shaped body; rim turns in gradually; the remains of a ribbon → handle ← protrude from one side of the rim; diagonal footring.
|
|
45.10.1
|
High, curved, thick, black → handle ← which bends back on itself to attach to mouth and at the back to the lowe |
|
45.10.4
|
Central, circular knob → handle ←, with flat top and inset rim.
|
|
45.3.1
|
Everted rim below which is attached a pinched → handle ← with a string hole; elongated piniform body.
|
|
45.6.12
|
Miniature. → handle ← bends outwards, like lekane-→ handle ← and a protrusion each side.
|
|
45.6.16
|
Flared cup mouth. Strap → handle ← descending from top of neck to sloping sho |
|
45.6.17
|
Flared mouth with flat lip. → handle ← starts halfway down neck, curves up and |
|
45.6.18
|
Flared mouth with flat on the top rim. Single strap → handle ← curves from top of shoulder down to top of body. Small torus flat base, d |
|
45.6.34
|
mouth tapering to a short neck that broadens to an ovoid body. High swung strap → handle ← joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. |
|
45.6.37
|
merging into a short, tubular neck, from the top of which emerges a thick strap → handle ← that loops down to the bottom of the shallow sloping shoulder; ovoid body |
|
45.6.5
|
Single ribbon → handle ← with projecting side pieces. The upper part of body rises sharply at rim. |
|
45.6.70
|
a raised band around it. Short rounded nozzle and circular smoke hole. Vertical → handle ← with a circular hole which runs down towards the base. Base demarcated bu |
|
45.6.71
|
n the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical → handle ← extends towards base and has a small hole. Base is demarcated but not rai |
|
45.9.2
|
Flat-lipped conical mouth, vertical strap → handle ← rising from the bottom of the neck and reattached at the top of the 'ankl |
|
46.5.1A-B
|
Matching lid with knob. The body has lugs on shoulder close to → handle ← and projections on the tops of → handle ←s.
|
|
46.9.1
|
pe. Shallow, flaring mouth; thin neck from the top of which a single strap thin → handle ← curves down to the flat shoulder; slight ridge between neck and shoulder; |
|
46.9.2
|
Rim set off by ridge at level of upper attachment of → handle ←. Lower part of body grooved in upper reserved half. Side of foot steppe |
|
47.10.3A-B
|
convex underside. From either side of the rim extends a semicircular horizontal → handle ←, round in section, that rises very slightly, flanked by short pointed spu |
|
47.2.24
|
Shallow with one wishbone → handle ← (the second is missing)
|
|
47.2.6
|
wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap → handle ←, attached just below the rim and rising slightly above; broad torus ring |
|
47.2.7
|
top, on an angled wall that curves sharply to a shallow bowl; horizontal strap → handle ←, nearly triangular, attached just below the rim, rising slightly upwards; |
|
47.6.4
|
Rounded, everted rim, just below which a vertical strap → handle ← emerges and extends to the shoulder, where there are two horizontal strap |
|
47.6.5
|
Rounded, everted rim, just below which a vertical strap → handle ← emerges and extends to the shoulder, where there are two horizontal strap |
|
48.12.10
|
Long tall neck from the top of which → handle ← loops up and then down to join edge of broad shoulder, curning slightly u |
|
48.12.4
|
Broad, flat rim; short neck the length of which runs the → handle ← with a hole for suspension; inverted oviod body; rounded base.
|
|
48.12.5
|
Vertical strap → handle ← curves up from rim and joins shoulder, rising slightly over the rim; tref |
|
48.12.6
|
Disk-shaped mouth with flat rim; cylindrical neck; flat strap → handle ← reaches from rim down to middle of shoulder; body is a slightly flattened |
|
48.12.7
|
y slopes sharply out to junction with bottom of single curved vertical circular → handle ←. Widest part of body is towards base making a 'squat' shape. Flat base.
|
|
48.12.9
|
rounded rim with a lip that is flat on the upper surface; ribbed vertical strap → handle ← extending 1/3 down the length of the vessel; slender neck widening to a c |
|
48.5.3
|
ll jug with rounded rim, cylindrical neck, piriform body, and high arching loop → handle ← that rises from the rim.
|
|
49.1.1
|
Inturned rim with straight sides; ribbon → handle ←; shoulder slopes down to vertical wall, then sharply recedes to vertical |
|
49.12.1
|
with a broad groove above a rounded edge. The underside is hollowed. Two strap → handle ←s, which flare on either side, rise up above the rim and then descend to r |
|
49.4.1
|
The mouth is conical, with a large aperture, the → handle ← is banded and the foot is two-stepped and disk-shaped, with a small centr |
|
49.8.1
|
eum of Fine Arts 22.632 (Padgett 1993, 211 no. 142, ill.), as if a fancier rim, → handle ←, and lower part of the foot have been added to this piece.
|
|
49.8.10
|
Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded → handle ← curves up from top portion of bulbous body to back of neck; outturned con |
|
49.8.11
|
Ball aryballos. Wide concave rim, thin strap → handle ← projecting from the rim and connecting it to the shoulder. Round body, sl |
|
49.8.12
|
Flaring mouth, flat rim on the top; single strap → handle ← curves down from top of neck to shoulder; body tapers to thick disk foot; |
|
49.8.2
|
The two-stepped → handle ← has its upper part in the shape of echinus, while the lower part is a sma |
|
49.8.4
|
Flat-bottomed aryballos. Broad, flat rim; tall thin neck; vertical strap → handle ←; rounded body; small footring; slightly convex base.
|
|
49.8.5
|
Broad, flat rim; short strap → handle ←; body shaped rather like a bombylios, with moulded rings; small ring foot |
|
49.8.6
|
Trefoil lipped; thin neck; thick strap → handle ← curves down from back of lip to lower body; half-sphere shaped body; flat |
|
49.8.8
|
Trefoil lip; large → handle ← with high sides making central channel curves up from rim, then down to t |
|
49.8.9
|
llos (pointed/piriform). The vessel has a flat, wide, disk-shaped rim, a banded → handle ← and a slim, cylindrical neck. The body is ovaloid (inverted egg) and the |
|
50.10.4
|
Cup mouth, a vertical, banded → handle ← and a disk-shaped base.
|
|
50.12.1
|
Fragment of rim of krater with part of root of one → handle ←.
|
|
50.12.11
|
Jar fragment with part of → handle ←
|
|
50.12.3
|
Fragment of a bowl with vertical → handle ←.
|
|
50.12.33
|
Fragment of a small jar, handmade, with broken stump of → handle ←
|
|
50.12.34
|
Fragment of cup with base of → handle ←.
|
|
50.4.18
|
es as an 'odd mug' and probably a local imitation of the late 5 c. Attic double → handle ← mug (667), has a knotted → handle ← which is otherwise similar to ours in con |
|
50.4.20
|
r body joining slightly taurus foot with slightly concave base. Curved vertical → handle ← attached to the lip and the shoulder
|
|
50.4.24
|
into which a wick hole has been made, slightly off centre. Small vertical ring → handle ← at the back of the lamp. Base is demarcated but flat.
|
|
50.4.5
|
Type 7a. Cut-away neck, with a vertical strap → handle ← attached to the lowest part, rejoining the body at the bottom of the shou |
|
50.4.6
|
Flaring mouth with rounded rim on the top. Circular vertical → handle ← rising over the rim, connecting the rim and the shoulder.
|
|
50.4.8
|
rving out to a carinated moulded foot, concave on the underside; vertical strap → handle ← curves up from the middle of the neck and rejoins at the base of the shou |
|
50.4.9
|
Trefoil lipped; rounded → handle ← curves up from the rim to the upper part of the body; short neck curves s |
|
50.5.1
|
Trefoil lipped oinochoe with rounded protrusions either side of neck-→ handle ← join. Single curved → handle ← that reaches over into mouth, appears to have |
|
50.5.3
|
Rounded mouth, thin lip. Thick strap → handle ← curves up from bottom of neck before descending to shoulder. Ring at the |
|
51.1.2
|
The vertical → handle ← is of ellipsoid cross-section with a banded back. The horizontal → handle ←s |
|
51.1.3
|
Thick, wide rim with flat top, broad neck. Two rounded → handle ←s curve upwards from the top of the body to the neck, from the middle of w |
|
51.4.1
|
Fragment of the rim and neck, around the surface of the → handle ←.
|
|
51.4.11
|
r, hollow on the interior. From the shoulder, on either side, rises an m-shaped → handle ← (half of one chipped off) with short projections in the middle. Three hol |
|
51.4.5
|
Sack-like body with narrow mouth (missing, as is → handle ←), broadening with slightly convex sides, and rounding gently to a flat ba |
|
51.4.8
|
The rim is slightly flared and the neck is short; a strap vertical → handle ← curves down from the rim to the shoulder; two smaller, round, horizontal |
|
51.4.9
|
The rim is conical, strap small → handle ← connecting the enck with the shoulder, is banded with an inflated back, s |
|
51.7.1
|
Trefoil lipped; high → handle ← with ridge down middle curves up from the shoulder considerably higher th |
|
51.7.15
|
roximating a sharp-edged donut, with beveled edges on the inside. A short strap → handle ← rises slightly from the rim and curves smoothly to adhere to the exterior |
|
51.7.3
|
p with rounded rim, sharply joined to ovoid body; single round, curved vertical → handle ← rises up from alongside the lip and rejoins at the shoulder; lower part o |
|
51.7.4
|
→ handle ←
|
|
51.7.5
|
t from a narrow neck, broadening and curving sharply into the ovoid body; strap → handle ← rises from the top of the neck and joins the lower part of the shoulder; |
|
51.7.8
|
per surface, tubular neck offset from mouth and shoulder; ridged vertical strap → handle ← loops up from top of neck and descends directly to the shoulder; squat bo |
|
52.3.2
|
Flat rim; tall mouth sloping in towards thin neck; → handle ← curves up from top of neck, then down to body; groove separates rounded b |
|
52.3.4
|
underside. On either side of the rim is attached a horizontal, u-shaped ribbon → handle ←, between a pair of lugs (→ handle ← and lugs broken off on one side).
|
|
53.8.3
|
underside. On either side of the rim is attached a horizontal, u-shaped ribbon → handle ←, between a pair of lugs.
|
|
54.2.2
|
Everted lip; thin, tapering neck; strap → handle ← curves down from rim to spherical, bulbous body; slightly raised flat foo |
|
54.8.1
|
or 'Mug'? Slender body, vertical straple → handle ← extending from the rim to the bottom of the body. Flat base.
|
|
55.1.1
|
body, in a continuous curve down to the angled torus ring foot. Vertical ribbon → handle ←, slightly grooved, loops from just below rim to the upper part of the bod |
|
56.8.2
|
nsists of a pointed convex centre, within a tapering concave part. Two u-shaped → handle ←s, round in section, rise from the bottom of the shoulder to high above th |
|
56.8.4
|
Shape 1; trefoil-lip joining at the back to a high curving vertical strap → handle ←, which joins at the shoulder; ring base.
|
|
58.2.4
|
y, base protrudes from body but has been damaged (during firing process ?). The → handle ← attaches to the top of the body and then again at the join of the rim and |
|
58.2.5
|
Round body somewhat pointed at the base. Cut-away neck spout (derived from |
|
58.2.6
|
One-→ handle ←d bowl. Rim is slightly concave. → handle ← is in wishbone shape. A deep well |
|
59.6.1
|
he resting surface, hollowed and conical within; a slightly incurving d-shaped → handle ← rises up, on either side, from the centre of the bowl to the height of th |
|
59.6.3
|
Single but ornate → handle ← that has pointed oval at bottom, two moulded lines towards top and a piec |
|
60.1.2
|
Pagenstecher lekythos. (Restored rim); thin neck from the middle of which → handle ← protrudes horizontally before sloping down to rounded body; broad foot; c |
|
60.1.5
|
;long neck widens to shoulder with smooth contour to ovoid body; vertical strap → handle ← rising from top of neck and rejoining at bottom of shoulder; short ring f |
|
60.8.2
|
on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded → handle ← curves down to the shoulder from the rim, and two horizontal, horseshoe s |
|
60.8.3A-B
|
urface, curved on the underside, with a rounded point at the centre. A wishbone → handle ← rises from the top of the wall, on either side; a lug protrudes from eith |
|
61.6.1.8
|
laring to a large body, and tapering again to a small, plain base; fat, rounded → handle ←.
|
|
61.6.3
|
and slightly convex underside. From either side, just below the rim, a u-shaped → handle ←, round in section, rises up to just above the top of the rim.
|
|
61.6.5
|
tical rim, rounded at both edges. The underside is hollowed under the knob. One-→ handle ←r: shallow bowl with a short nearly vertical flange, rounded at the lip, s |
|
62.5.1
|
'Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round → handle ←, slightly concave sides that taper sharply below the → handle ← to a raised b |
|
64.7.1
|
emless (of a late type). Thin inturned rim; shallow bowl; one remaining rounded → handle ← curves up slightly higher than the rim from just below the rim; round foo |
|
65.6.1
|
The mouth is conical, the → handle ← is of ellipsoid cross-section and the foot is disk-shaped.
Cf. 'The Red a |
|
69.7.1
|
cat 1966, 182-84).
Foot-shaped aryballos with a broad rim, short vertical strap → handle ←, squared, offset neck; the body of the vase in the shape of a left foot, |
|
71.12.1
|
Ovaloid shape. Slightly deep rounded mouth. Strap → handle ← connecting the neck to the shoulder.
|
|
71.12.5
|
Long, thin strigil steeply curved. The → handle ← is thicker at the front and thinner at the back where it bends over to fo |
|
71.12.6
|
inner on the back than the front as it bends over to make an oblong shape. The → handle ← adjoins the strigil in a long triangular point with an incised line actin |
|
76.6.1
|
Trefoil lipped. Oval shaped body with single → handle ← from mouth to back, with a curled over section at end. Flat base. Small r |
|
78.12.1
|
f centre. Very small rounded nozzle with a large circular wick hole. Vertical → handle ← opposite the nozzle, flat base with no delineation.
|
|
78.12.10
|
with a slightly irregular wick hole that cuts into the shoulder area. Vertical → handle ← which reaches down towards the base and attaches around the shoulder, cir |
|
78.12.11
|
with a slightly irregular wick hole that cuts into the shoulder area. Vertical → handle ← which reaches down towards the base and attaches around the shoulder. Ci |
|
78.12.19
|
e body shape and has a rounded tip with a medium oval wick hole. Small vertical → handle ← opposite the nozzle. Base is unmarked but slightly concave.
|
|
78.12.3
|
he centre of the discus. Small single volutes, concave moulded discus. Vertical → handle ← with hole through. No foot, slightly concave base.
|
|
78.12.8
|
and flat with a rounded tip and a circular wick hole, just off centre. Vertical → handle ← extending towards the base at the back with a small hole though the centr |
|
78.12.9
|
of the nozzle, the start of a rounded tip with a circular wick hole. Space for → handle ←. Circular flat delineated base.
|
|
79.1.10
|
ick hole. Base is concave with a moulded ring. At the back are the remains of a → handle ←.
|
|
79.1.11
|
Spreading circular body with long flat nozzle and large oval wick hole and |
|
79.1.13
|
Large open lamp, deep circular body with a rounded open nozzle. Vertical ring → handle ← at the back, small moulded ring foot.
|
|
79.1.15
|
Fragment of a lamp → handle ←,
|
|
79.1.16
|
ounded tip and slightly irregular circular wick hole. Remains of small vertical → handle ← attached to the shoulder. Small circular base, slightly concave not linea |
|
79.1.17
|
e sides, the smoke hole is circular and almost in the centre of the nozzle. the → handle ← is transverse and has a hole in the centre. The holes all appear to be of |
|
79.1.5
|
small filling hole. Small raised protruding foot with flat base. Large vertical → handle ← with one incised line along the length of it and a second band laying acr |
|
79.1.6
|
he nozzle is small and rounded with an oval wick hole just off center. Vertical → handle ← which reaches to the base which is demarcated with two concentric circles |
|
80.7.1
|
underside. On either side of the rim is attached a horizontal, u-shaped ribbon → handle ←, between a pair of lugs.
|
|
81.9.1
|
Rounded, everted rim, long neck, piriform body, ring foot. Thick strap → handle ← curves up from the middle of the thick neck and down to the shoulder.
|
|
85.3.2
|
Wide, concave rim; short strap → handle ← from bottom of lip to shoulder; thin short neck curves uninterrupted into |
|
91.11.5
|
→ handle ← fragment
|
|
E.23.16
|
Fish shaped, → handle ← is tail, mouth is detailed, possibly a detailed eye, and a hole at the to |
|
E.23.26
|
Everted lip attached to long straight neck, shallow but wide upper body. L |
|
E.23.30
|
Squat, gourd-like in shape with → handle ←. Neck is long, the → handle ← attaches to the top of the shoulder, follows t |
|
E.62.19
|
Hammer shaped → handle ← with a slit where the mirror sat in the top. The top parts are curved ove |
|
E.62.40
|
Three pieces. Lid is circular and flat with a central knob → handle ←, also circular. Second piece is the ring which sits between lid and base |
|
E.62.46
|
nd thin blade with a nail through to both sides, perhaps for attaching a wooden → handle ←. The blade is pointed at one end then widens in a triangle then thins aga |
|
E.62.56
|
Poppy flask, with a fat body, long bottle neck with spreading lip, large → handle ←. Two moulded rings round neck at junction with → handle ←. Foot conical. Cf. |
|
E.63.18
|
Portion of a slight oval, cylindrical → handle ← of a sistrum/mirror.
|
|
E.65.10
|
lar with a small rectangular section where the mirror would sit into the wooden → handle ←.
|
|
E.65.11
|
. Has a rectangular extension at base so that the object would have sat in the → handle ←. Flat and thin with slightly sloped edges to avoid making them sharp.
|
|
E.65.12
|
round but still circular. Small rectangular extension to allow mirror to sit in → handle ←.
|
|
L.2011.1.1
|
Quite cylindrical → handle ←, extending from the rim to the shoulder, slightly rising over the rim. Ri |
|
L.2011.1.26
|
Fragmented neck with remnants of a → handle ←. Bulbous neck, wider near the outturned rim.
|
|
L.2011.1.36
|
Almost complete, with → handle ← and nozzle, only one shoulder missing.
|
|
L.2011.1.4
|
Lamp fragment, with a shoulder and one → handle ←. Quite circular shape. The → handle ← is narrower on the top, and it has a tr |
|
L.2011.1.48
|
Deneuve type VIIA or B. Circular shape, with a small → handle ←.
|
|
L.2011.1.51
|
Fragment of rim and one → handle ←, evidence of the connection of the second → handle ←. Vertical short → handle ← w |
|
L.2012.9.1
|
Complete with nozzle, → handle ← and two original holes for use
|
|
L.2016.3.10
|
erted, rounded rim and a moulded face at centre of the exterior. A small curved → handle ←, running in a straight line, is attached to the rim and ends at the back |
|
REDMG:1926.99.52
|
w neck that broadens to an ovaloid body with rounded base; small round vertical → handle ← is tucked in under the overhanging lip.
|
|
REDMG:1926.99.54
|
l cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap → handle ← arches up from just below the mouth and rejoins at the bottom of the shou |
|
REDMG:1926.99.60
|
Cup mouth, cylindrical neck, to which inside of → handle ← is attached and rises, rejoining at the shoulder; body with straight side |
|
REDMG:1935.87.1
|
Trefoil mouth at the back of which is attached an angular strap → handle ←, that rises slightly and then descends sharply to join the lower shoulder |
|
REDMG:1935.87.15
|
n rim with flat lip, just below which is attached a horseshoe shaped horizontal → handle ←, slightly canted and rising to just above the rim;.flattened hemispherica |
|
REDMG:1935.87.18A
|
d oinochoe with lid tricorn lid (RM.87.35.18B). Wide-bodied, with a tall curved → handle ←, trefoil mouth, and tricorn lid. Body contracting to foot-ring. Cf. Payne |
|
REDMG:1935.87.20
|
inochoe with lid; shallow sloping shoulder and wide body with wide base; curved → handle ←.
|
|
REDMG:1935.87.21
|
ping shoulders curving into an ovoid body, narrowing to a flat base; flat strap → handle ← extends from the rim to the bottom of the shoulder.
|
|
REDMG:1935.87.26
|
Cucumber shape; conical mouth; small → handle ←.
|
|
REDMG:1935.87.6
|
ted the lid; just below this are attached two horizontal horseshoe-shaped strap → handle ←s, slightly canted upwards, to which spurs are attached on either side. Th |
|
REDMG:1942.5.6.1
|
hort narrow neck that broadens to a globular body with rounded base; flat strap → handle ← falls directly from the rim to the middle of the shoulder.
|
|
REDMG:1942.5.6.2
|
roup iii. Pinched trefoil mouth from which rises at the back a high swung strap → handle ← that rejoins the body above the middle; small indentation on lower part o |
|
REDMG:1950.25.1
|
lower part; narrow, flat resting surface; slightly concave underside. Two-piece → handle ←, knotted at the top, splays at the attachment to the rim.
|
|
REDMG:1951.130.1
|
grooved trefoil lip, from the back of which extends a vertical tripartite strap → handle ← that reattaches at the middle of the shoulder; broad ridge at the bottom |
|
REDMG:1951.132.1
|
er below the medallion, and terminates in a three-stepped flanged mouth. A loop → handle ← (semicircular in cross section) rises from the shoulder at a right angle |
|
REDMG:1951.140.1
|
the profile of the base is decorated with two ridges. Two incurving horizontal → handle ←s, round in sectiona, are attached to the upper third of the body; a verti |
|
REDMG:1951.142.1
|
Trefoil mouth attached at the back to a small strap → handle ← that reattaches at the bottom of the shoulder; short cylindrical neck cur |
|
REDMG:1951.143.1
|
Trefoil mouth at the back of which is attached a nearly L-shaped strap → handle ←, that begins above the height of the mouth and descends to join the lower |
|
REDMG:1951.147.1
|
pout, squared at the end. From the back of the spout rises a high curving strap → handle ←, rounded on the outside, which arches in a rectangular form, and descends |
|
REDMG:1951.151.1
|
ded in profile, with narrow, flat resting surface and recessed underside; strap → handle ← rises from the upper part of the shoulder, along the side of the neck and |
|
REDMG:1951.153.1
|
d rounded rim on a short cylindrical neck, from the back of which rises a strap → handle ← that curves down to join the vase just above the tail.
|
|
REDMG:1951.154
|
and and concave lower surface, curving into a cylindrical neck; vertical ribbon → handle ← emerges from the rim and rejoins the bottom of the neck at a bulge, below |
|
REDMG:1951.155
|
g rim, and concave lower surface; pinched neck to which is attached a small lug → handle ←, with a suspension hole; neck broadens to a baggy, ovoid body, with a rou |
|
REDMG:1951.156.1
|
et from a tall cylindrical neck, which broadens to a flat shoulder. Small strap → handle ← arches up from alongside the neck and rejoins at the bottom of the should |
|
REDMG:1951.157.1
|
row ring base with rounded resting surface and slightly convex underside; strap → handle ← rises from the side of the neck and rejoins at the lowest part of the sho |
|
REDMG:1951.158.1
|
Trefoil mouth attached at the back to a small, ridged strap → handle ← that reattaches at the bottom of the shoulder; short cylindrical neck cur |
|
REDMG:1951.1707
|
Everted rounded rim, from the back of which extends a round vertical → handle ← that reaches to the middle of the biconical body with a flat, rough base. |
|
REDMG:1951.1708
|
Everted rounded rim, from the back of which rises a round vertical → handle ← that joins the body at the middle of the slightly baggy body with a flat, |
|
REDMG:1953.25.1
|
ghtly incurved rim, below which is attached a one side a round horseshoe-shaped → handle ←, canted slightly up to the level of the rim, and on the other side a ridg |
|
REDMG:1953.25.13
|
ar oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap → handle ←, high swung and descending vertically to the middle of the shoulder; slig |
|
REDMG:1953.25.14
|
Trefoil mouth attached at the back to a high swung strap → handle ← that reattaches near the bottom of the shoulder; short cylindrical neck w |
|
REDMG:1953.25.15
|
Trefoil lip attached at the the back to a broad, high curved strap → handle ← that curves in slightly to the middle of the shoulder; short cylindrical |
|
REDMG:1953.25.16
|
Trefoil mouth at the back of which is attached a hook-shaped round → handle ← that begins above the height of the mouth and turns back to join the shou |
|
REDMG:1953.25.17
|
roup iii. Pinched trefoil mouth from which rises at the back a high swung strap → handle ← that rejoins the body above the middle; small indentation on lower part o |
|
REDMG:1953.25.20
|
Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon → handle ←, moulded ring just below neck, and shallow flaring ring foot.
|
|
REDMG:1953.25.22
|
et from a tall cylindrical neck, which broadens to a flat shoulder. Small strap → handle ← arches up from alongside the neck and rejoins at the bottom of the should |
|
REDMG:1953.25.23
|
et from a tall cylindrical neck, which broadens to a flat shoulder. Small strap → handle ← arches up from alongside the neck and rejoins at the bottom of the should |
|
REDMG:1953.25.25
|
l cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap → handle ← rejoins at the bottom of the shoulder; below a carination at shoulder is |
|
REDMG:1953.25.26
|
y offset from narrow neck, which broadens to a nearly flat shoulder; thin strap → handle ← rises from under the cup mouth and rejoins at the lower part of the shoul |
|
REDMG:1953.25.27
|
Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap → handle ← rises from the top of the neck and rejoins at the lower part of the shoul |
|
REDMG:1953.25.28
|
Narrow neck (mostly missing), broadens to a nearly flat shoulder; thin strap → handle ← broadens and rejoins at the lower part of the shoulder; below carination |
|
REDMG:1953.25.29
|
Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap → handle ← broadens and rejoins at the lower part of the shoulder; below carination |
|
REDMG:1953.25.30
|
ndrical neck which curves sharply into nearly diagonal shoulder; vertical strap → handle ← (missing) reached from top of neck to bottom of the shoulder, below which |
|
REDMG:1953.25.32
|
ounded rim, to the top of which are attached the looped ends of a pair of strap → handle ←s, concave on their exterior surfaces; the tubular ends of the loops rejoi |
|
REDMG:1953.25.35
|
with a thin resting surface, concave on the underside, pointed at centre; strap → handle ← (missing) rose from the side of the neck and rejoined at the lowest part |
|
REDMG:1953.25.36
|
ll neck with concave sides, alongside which is attached and rises a small strap → handle ← (lopsided) that rejoins at the middle of the shoulder; sharply joins barr |
|
REDMG:1953.25.39
|
Flanged rim and tapering body, to which are attached broad horizontal strap → handle ←s (rounded but almost oblong in shape), slightly canted upwards, with spur |
|
REDMG:1953.25.43
|
p; short narrow neck curving into a globular body with rounded base; flat strap → handle ← extends from the rim to the middle of the shoulder.
|
|
REDMG:1953.25.48
|
with concave lip, slightly overhanging, attached to a high swung vertical strap → handle ←, which reattaches at the shoulder. Below the mouth is a short neck with a |
|
REDMG:1953.25.49
|
Round mouth with slightly flaring lip from which rises a vertical strap → handle ← that reattaches at the middle of the shoulder; mouth curves into a short, |
|
REDMG:1953.25.50
|
with concave lip, slightly overhanging attached to a high swung vertical ribbed → handle ←, which reattaches at the shoulder. Below the mouth is a short neck with a |
|
REDMG:1953.25.51
|
g an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap → handle ←, grooved, extends horizontally from the rim and curves back into the body |
|
REDMG:1953.25.52
|
d curves into a broad neck that broadens to a piriform body. The vertical strap → handle ← emerges from the rim and descends sharply to the bottom of the shoulder. |
|
REDMG:1953.25.53
|
arrowing to a short neck at the top of which is attached a small vertical strap → handle ← that extends the the shoulder; wall curves continuously from neck, wideni |
|
REDMG:1953.25.54
|
resting surface, diagonal element, and offset underside; a vertical loop ribbon → handle ← is tucked in just below the rim where it adjoins the upper half of the bo |
|
REDMG:1953.25.55
|
rply at the bottom to a flat base; grooved just above the base. Two-piece strap → handle ← splays at the attachment to the rim and rejoins the shoulder (for → handle ← |
|
REDMG:1953.25.59
|
rim, concave, slightly overhanging lip, attached to a high swung vertical strap → handle ←, which reattaches at the shoulder. Below the mouth is a short neck with a |
|
REDMG:1953.25.60
|
ound mouth with slightly flaring lip from which extends a short vertical ribbed → handle ← that reattaches at the middle of the shoulder; short, thin neck, which cu |
|
REDMG:1953.25.77
|
are concave with large decorative features protruding from either side. Base of → handle ← remains with half of the hole left. Ring base, slightly concave.
|
|
REDMG:1953.25.78
|
ow body, concave shoulder leading to a large filling hole. Beginnings of a band → handle ←. Wide shallow nozzle tilts slightly upwards, large oval wick hole. flat |
|
REDMG:1958.111.1
|
Slightly flaring cup mouth, with a slightly convex upper surface; strap → handle ← (lopsided) rises from the top of the neck and rejoins at the middle of th |
|
REDMG:1958.112.1
|
ghtly concave on the underside, with a cylindrical depression; a vertical strap → handle ← extends from the middle of the neck to the bottom of the shoulder, just a |
|
REDMG:1958.113.1
|
Ovoid aryballos, with a rounded mouth (now broken), small round vertical → handle ← reaching from just below the mouth to the bottom of the high shoulder, wh |
|
REDMG:1958.13.1
|
Small bowl with inverted base and tiny rim. Tiny nub → handle ← and five tiny points project from the rim.
|
|
REDMG:1958.16.1
|
Bowl with rounded body and no base. Wishbone → handle ← and inward rim.
|
|
REDMG:1958.19.1
|
g with tall narrow tapering neck, beak spout, and bulbous body. Vertical strap → handle ← joins the base of the neck near the spout and a thrid where the neck and |
|
REDMG:1958.23.1
|
to one side. The tall narrow neck has an everted rim. Single, wide flat strap → handle ← joins the base of the rim and the shoulder.
|
|
REDMG:1958.33.1
|
Jug with bulbous body with delineated flat base. Single strap → handle ← joins the upper body to the centre of the long neck with a funnel-shaped |
|
REDMG:1958.37.1
|
th ovoid body and everted rim and slightly concave circular foot. Single strap → handle ← joins rim to centre of the body.
|
|
REDMG:1961.150.3
|
k, decorated with a moulded ring at the junction with the thin rounded vertical → handle ←, which arches and rejoins at the broadest part of the biconical body; con |
|
REDMG:1961.150.4
|
mispherical bowl, slightly indented at base, to which is attached a triangular → handle ← with two prongs at the top.
|
|
REDMG:1961.199.1
|
Very narrow neck, from which loops up a small, narrow strap → handle ←, which rejoins at the middle of the broad shoulder. The shoulder curves i |
|
REDMG:1962.184.33.21
|
ightly narrowing and then curving to a slightly diagonal shoulder; narrow strap → handle ← extends from the middle of the neck to the bottom of the shoulder, just a |
|
REDMG:1964.1601
|
ge oval wick hole, filing hole is wide and circular, there is no discus. Ribbon → handle ← around the back of the lamp, attaching to the shoulder in two places. Sma |
|
REDMG:1964.1603.1
|
p. Base is flat and circular, wheel or wire marks still exist on the base. Band → handle ← is attached across the back of the lamp.
|
|
REDMG:1964.1604.1
|
ightly dipped tip, level top and a oval wick hole. → handle ← was a horizontal band → handle ← around the back. Base is circular, large and has a very slight depression |
|
REDMG:1964.1609.1
|
Ovoid body with → handle ← and nozzle included in the shape. Flat shoulder, raised rim of discus and |
|
REDMG:1964.1610.1
|
gle, elongated oval wick hole piercing the body. Irregular flat lateral pinched → handle ←, base is a slightly raised ring mirroring the ovoid shape of the body.
|
|
REDMG:1964.1611.1
|
ep nozzle rounded tip and sides, medium size circular wick hole. Small vertical → handle ← with piercing, attached to the shoulder and to the body, extending toward |
|
REDMG:1964.1612.1
|
cylindrical with one side deeper than the other. Large circular, high vertical → handle ← attached to the shoulder opposite the nozzle. Small slightly of centre fo |
|
REDMG:1964.1613.1
|
f an average length with a rounded wick hole. large un-pierced pinched vertical → handle ←, small circular, slightly concave demarcated base.
|
|
REDMG:1964.1614.1
|
flat and had a small round wick hole and probably a rounded tip. high vertical → handle ← reaching down towards the base, circular piercing through the → handle ←. Cir |
|
REDMG:1964.1615.1
|
ick hole, at base of nozzle there appears to be a small air hole. Flat vertical → handle ← with circular piercing through it. → handle ← is high above the body and reac |
|
REDMG:1964.1616.1
|
Ovoid body with → handle ← and nozzle included in the shape. Flat shoulder, raised rim of discus and |
|
REDMG:1964.1617.1
|
e narrowing towards the rounded tip; large oval wick hole. Beginnings of a band → handle ←. Base not outlined, very slightly concave.
|
|
REDMG:1964.1618.1
|
cave sides, tip is splayed, large oval wick hole. Large circular, high vertical → handle ← attached to the shoulder opposite the nozzle. Small foot is circular and |
|
REDMG:1964.1620
|
B. Round mouth, slightly concave lip, from which extends a short vertical strap → handle ← that reconnects at the bottom of the shoulder; narrow neck, sloping shoul |
|
REDMG:1964.1621
|
tly concave lip, and slightly everted rim, below which the short vertical strap → handle ← emerges, bends, and descends to the shoulder. Globular body attached to |
|
REDMG:1964.1622
|
rrowing to a short neck, at the top of which is attached a small vertical strap → handle ← that extends the lower part of the shoulder; wall curves continuously fro |
|
REDMG:1964.1624
|
, flaring trefoil lip from the back of which rose a (high swung) vertical strap → handle ←, broad neck and a globular body, slightly elongated at the back where the |
|
REDMG:1964.1625
|
to a short neck curving smoothly into a squat, baggy, body; high curving strap → handle ← reaches from back of lip to middle of body; slightly raised base with fla |
|
REDMG:1964.1626
|
Trefoil mouth attached at the back to a high-swung vertical → handle ← (missing) that reattached at the bottom of the diagonal shoulder; below c |
|
REDMG:1964.1638
|
Small black → handle ←, broken off from larger object.
|
|
REDMG:1964.1647
|
Large trefoil oinochoe. High swung strap → handle ← emerges from below the trefoil mouth and reattaches at the middle of the |
|
REDMG:1964.1648
|
a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap → handle ← that curves down to the middle of the shoulder; globular body with a flat |
|
REDMG:1964.1649
|
up iii. Tall cylindrical neck broadening to a diagonal shoulder. Vertical strap → handle ← rises from top of neck to bottom of the shoulder, where it broadens. Belo |
|
REDMG:1964.1685.1
|
→ handle ←
|
|
REDMG:1964.1687.1
|
Fragment of → handle ← and adjacent part of rim.
|
|
REDMG:1964.1699.1
|
dy with nearly vertical sides, slightly tapering to a flat base; round vertical → handle ←, twisted, extends from the rim to the shoulder.
|
|
REDMG:1964.1707.1
|
rted thickened and rounded rim, from the back of which extends a round vertical → handle ← that joins the body at the middle of the biconical body with a flat, roug |
|
REDMG:1964.1710.1
|
Probably had a wishbone → handle ←. Typical Late Cypriot I shape. Rounded base.
|
|
REDMG:1997.209.3
|
ryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical → handle ← reaching from just below the mouth to the middle of the high shoulder, wh |
|
REDMG:1998.153.4
|
Round mouth with slightly flaring lip from which rises a vertical strap → handle ← that reattaches at the bottom of the shoulder; mouth curves into a short, |
|
REDMG:2003.92.1
|
Squat rounded body that tapers towards a ring base. Single strap → handle ← joins the long narrow and leaning neck near the thick rim and shoulder.
|
|
REDMG:2003.93.1
|
s towards a ring base. The body is flat and angled in places. Single-reliefed → handle ← joins the long tapering neck near the thick rim and shoulder.
|
|
REDMG:2004.95.1
|
mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap → handle ← extends from the middle of the neck to the bottom of the shoulder, just a |
|
REDMG:2004.98.1
|
ex upper surface; tall cylindrical neck, from which rises a thin vertical strap → handle ←, that rejoins the diagonal shoulder just above the carination; straight s |
|
T.2012.II.27
|
Fragment of pot, specifically, the upper part of the → handle ← near the mouth. Two parts of pot → handle ← exist.
|
|
TEMP.2003.6.11
|
Skyphos or Kantharos? The rim is torus-shaped and sloping and the → handle ← is vertical with a central rib.
|
|
TEMP.2003.6.12
|
The → handle ← is riddled, of ellipsoid cross-section, curving upwards, higher than the |
|
TEMP.2003.6.13
|
Fragment of the double → handle ← of an oinochoe.
|
|
TEMP.2003.6.3
|
(a) Part of a triple → handle ← and part of the area of the body where it was joined. (b) Part of lower b |
|
TEMP.2003.6.6
|
Two-→ handle ←d skyphos. The double, riddled → handle ← is of ellipsoid cross-section and cu |
|
TEMP.2003.6.7
|
Two-→ handle ←d skyphos. The → handle ←s are of ellipsoid cross-section, riddled and curvin |
|
TEMP.2003.6.8
|
Skyphos with ring-shaped foot and one or two → handle ←s, missing. a, b, d, and e) Parts of the rim and body. c)Part of the rim |
|
TEMP.2003.7.66
|
U-shaped → handle ←
|
|
TEMP.2005.1.5
|
and top section of the body. Top appears to have squared area; perhaps where a → handle ← was connected.
|
|
TEMP.2005.1.7
|
ned body with a short, wide neck and flat, rounded base. Potentially once had a → handle ←.
|
|
TEMP.2005.1.8
|
a short and wide neck. One side of the neck protrudes out further, indicating a → handle ←?
|
|
TEMP.2007.2.43
|
Fragment of a → handle ← from a cup-mouth
|
|
TEMP.2007.2.47
|
→ handle ←
|
|
TEMP.2012.11.34
|
Lekythos → handle ← fragment
|
|
TEMP.2022.6.2
|
course jug with fat body, thick rim. The single → handle ← reaches from the neck beneath the rim to the shoulder of the jug. The nec |
|
Temp.2022.7.1
|
the height, short neck, the rim is circular and made to pour the liquid, small → handle ←.
|
|
temp.2014.12.1
|
or olive oil but askoi generally have a pouring spout wider and parallel to the → handle ←, and they are very often zoomorphic), this is a cruet for daily use. Roun |
|
temp.2014.12.2
|
oinochoe with rounded body, circular mouth and flat base. Single → handle ← from the mouth to the half-belly: small groove at the end of the neck.
|
|
temp.2022.6.2
|
Apulian/ Messapian ceramic jug, course jug with fat body, thick rim. The single → handle ← reaches from the neck beneath the rim to the shoulder of the jug. The nec |
|
temp.2022.7.1
|
neck, the rim is circular and made to pour the liquids; flat base and one small → handle ←
|
|
temp.2022.7.2
|
narrow-necked ampoule, without → handle ←, the neck is long and thin, rounded body and flat base.
|
|
temp.2022.7.3
|
or olive oil but askoi generally have a pouring spout wider and parallel to the → handle ←, and they are very often zoomorphic), this is a cruet for daily use. Roun |
|
temp.2022.7.4
|
terracotta jug with rounded body, flat base and large neck; the → handle ← is from the upper part of the neck to the upper part of the body, between |
|
temp.2022.7.6
|
jug with rounded body, wider at the middle of the body, with flat base and one → handle ← from the upper part of the neck to the upper part of the body; there is a |
|
temp.2022.7.7
|
small spherical jug with flat base, small neck and one → handle ←
|
|