| 13.10.27
|
'Cocked hat'; open lamp consisting of a shallow circular bowl; two folded in edges which form a wick rest; small rim visible at back; small central circular foot.
|
|
| 13.10.28
|
Seated female figurine of Kourotrophos holding child on lap, with raised head. Seated on chair with flat back.
|
|
| 13.10.35
|
Rectangular male head with flat back. Round eyes, flat nose and no smile.
|
|
| 13.10.36
|
Upper half of moulded, standing female, holding an offering in right hand. Back unworked, with hole for ventilation when firing.
|
|
| 14.9.118
|
Mouldmade female with flat back and stumplike arms.
|
|
| 14.9.119
|
Female head, appearing to wear sakkos, but now broken at back with a row of curls at the front.
|
|
| 22.3.40
|
Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base.
Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia')
|
|
| 22.3.42
|
Open lamp with wide, shallow, circular body, with curved shoulder and a down turned rim. covered flat nozzle with a large oval wick hole. Horizontal band handle which follows the back of the body. Foot is shallow and slightly concave
|
|
| 22.9.1
|
Pappas figurine consisting of a rectangular body, ovoid in cross-section, flaring at the base, with a concave resting surface. At the top of the body or trunk, two rudimentary 'arms' extend in triangular forms that terminate in rounded stumps; above, the neck rises in a cylinder from which (on the front) extends a protrusion that suggests a nose, above which is a flat piece of clay coiled back on itself, resting against a widening cylindrical 'polos' crown, which is concave at the top.
|
|
| 23.11.31IIII
|
Female facing left, wearing a pointed headdress over long styled hair. One hand appears to be held up to the face. There is a thin spike projecting upwards at the back. The skirt is belted at the waist, and is patterned with vertical bands containing zigzags or chevrons which terminate at a shin-length curved hem. The left shin and foot appear angled back to the other foot, giving the figure the appearance of walking.
|
|
| 23.11.31V
|
Warrior facing right, with crested helmet and round shield decorated with "bicycle-spoke" design. There is an also area of square grid-marking on the neck, below the back of the helmet.
|
|
| 23.11.31ZZ
|
Female facing right, wearing a long skirt marked with horizontal bands. The straight line of the back projects above the head. One arm is raised in front of the body, and the other is held at waist level.
|
|
| 26.12.26
|
Trefoil lip oinochoe with a banded handle that bears a ribbed back. The body is ovaloid and the foot is conical with a round base.
|
|
| 26.7.12
|
Curved, semi-circular then pinched horizontal section form back of pin. Ridge runs down back.
|
|
| 29.11.13
|
Tortoise with slight protrusion for head and four triangular protrusions at the bottom for legs. Back divided into slight humps to resemble shell
|
|
| 33.4.3
|
The mouth is tall and conical, the back of the handle is inflated and the foot is disk-shaped.
|
|
| 34.10.16
|
Pappas figurine with polos and beak-like face. Solid, hand-made, with triangular arms and flat back; concave resting surface.
|
|
| 34.10.23
|
Molded figurine (hollowed at back in a tall rectangle) depicting Leda with the swan. Leda stands with her right foot upraised (on a rick?), and holds in her upraised left arm a himation, which wraps around her back and swirls onto the top of her right leg, to cover her pudenda, right leg, and run down the interior of her left leg. She holds the swan firmly with her right hand, so that it is tucked under her right arm.
|
|
| 34.10.27
|
Standing male figure in a cloak with his legs crossed, leaning on a support to his right. Figurine is hollow and has large hole in the back. No relief sculpture on the reverse side.
|
|
| 37.11.8
|
The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base).
|
|
| 45.10.1
|
High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
|
|
| 47.2.26
|
Kourotrophos figurine of woman and child. Rectangular block with mouldmade face and flat back. Infant suckles at left breast.
|
|
| 47.2.32
|
Standing, mouldmade figurine, playing tambourine with slightly round back. Cylindrincal filled body, pointed headdress and moulded arms, placed across body.
|
|
| 49.8.10
|
Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside.
|
|
| 49.8.6
|
Trefoil lipped; thin neck; thick strap handle curves down from back of lip to lower body; half-sphere shaped body; flat base.
|
|
| 50.4.24
|
Shallow circular body with convex shoulder and a small concave discus; small filling hole at centre. Nozzle is short and has a flat surface at the tip into which a wick hole has been made, slightly off centre. Small vertical ring handle at the back of the lamp. Base is demarcated but flat.
|
|
| 50.4.4
|
Female mask (hollowed at back), with gaping mouth, hollowed eyes, hair arranged in thick ridges, at side of head and above brow (fringe).
|
|
| 51.1.2
|
The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part.
|
|
| 51.4.9
|
The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath.
Cf. Agora 12 part 2, no. 1117, pl. 38
Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59
|
|
| 56.8.4
|
Shape 1; trefoil-lip joining at the back to a high curving vertical strap handle, which joins at the shoulder; ring base.
|
|
| 67.6.3
|
Hollow, large opening in back and hole in base. Back of figurine is left unformed.
|
|
| 71.12.5
|
Long, thin strigil steeply curved. The handle is thicker at the front and thinner at the back where it bends over to form an oblong. The thinner piece is not attached to the body but curves back on itself and end is a flat circle.
|
|
| 71.12.6
|
Wide strigil curved in a tight arc. Handle is square and thinner on the back than the front as it bends over to make an oblong shape. The handle adjoins the strigil in a long triangular point with an incised line acting as a border.
|
|
| 76.6.1
|
Trefoil lipped. Oval shaped body with single handle from mouth to back, with a curled over section at end. Flat base. Small round neck.
|
|
| 78.12.4
|
Shallow circular body (back deeper than the front), small convex shoulder, concave discus with a very small filling hole in the centre. Nozzle is flat with concave sides , a rounded tip and a circular wick hole that is just off centre. Base is demarcated and slightly concave.
|
|
| 78.12.8
|
Circular body, small convex shoulder with a slightly concave discus, two small holes on the discus, one on the central axis, the other just slightly off to the left. The nozzle is small and flat with a rounded tip and a circular wick hole, just off centre. Vertical handle extending towards the base at the back with a small hole though the centre. Demarcated base is flat except for a small depression.
|
|
| 79.1.10
|
Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle.
|
|
| 79.1.13
|
Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot.
|
|
| 79.1.16
|
Mainly circular body, nozzle is moulded with body disturbing the circular edge back half of body is deeper than the front. Shoulders are convex, discus is concave with a small circular filling hole in the centre. Long deep nozzle, sides follow smoothly on from the body, elongating the circular shape, slightly concave top marked with a ridge on either side, rounded tip and slightly irregular circular wick hole. Remains of small vertical handle attached to the shoulder. Small circular base, slightly concave not lineated.
|
|
| E.23.30
|
Squat, gourd-like in shape with handle. Neck is long, the handle attaches to the top of the shoulder, follows the handle upwards for a centimetre and the bends back to reattach on the upper body. The body is spherical in shape, tapering to a small disc base.
|
|
| E.23.34
|
Seated figurine of Horus on a solid square base. Horus' two arms run parallel to the thighs and the feet; his plaited side lock over his right shoulder denotes childhood. The base has a short nodule attached to the back of it.
|
|
| E.62.9
|
Rectangular in shape with a wide back tapering to teeth. Teeth are short and narrow and there are 22 plus two larger side pieces, one either end.
|
|
| L.2016.3.10
|
Miniature dimension. Round, outwards bulged ceramic disc, with very slightly everted, rounded rim and a moulded face at centre of the exterior. A small curved handle, running in a straight line, is attached to the rim and ends at the back side of the left forehead area and the right chin area.
|
|
| L.2016.3.31
|
Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
|
|
| REDMG:1935.87.1
|
Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside.
|
|
| REDMG:1942.5.6.2
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1951.130.1
|
Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface.
|
|
| REDMG:1951.142.1
|
Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside.
|
|
| REDMG:1951.143.1
|
Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside.
|
|
| REDMG:1951.147.1
|
Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment.
|
|
| REDMG:1951.153.1
|
Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail.
|
|
| REDMG:1951.158.1
|
Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside.
|
|
| REDMG:1951.1707
|
Everted rounded rim, from the back of which extends a round vertical handle that reaches to the middle of the biconical body with a flat, rough base.
|
|
| REDMG:1951.1708
|
Everted rounded rim, from the back of which rises a round vertical handle that joins the body at the middle of the slightly baggy body with a flat, rough base.
|
|
| REDMG:1953.25.103
|
Moulded female figurine with extended arms, wearing headdress. Flat, roughly worked back. Arm position suggests she may have been a singer, forming parts of a ring and is now broken from her base.
|
|
| REDMG:1953.25.13
|
Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
|
|
| REDMG:1953.25.14
|
Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
|
|
| REDMG:1953.25.15
|
Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
|
|
| REDMG:1953.25.16
|
Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group
|
|
| REDMG:1953.25.17
|
Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
|
|
| REDMG:1953.25.51
|
Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
|
|
| REDMG:1953.25.89
|
Moulded female torso with flat back.
|
|
| REDMG:1953.25.99
|
Standing female figure, drapery knotted round hips, leaving one leg bare, and falling on left shoulder. Back plain, with hole for suspension. On right side, amphora with ridged neck.
|
|
| REDMG:1964.1601
|
Circular deep body with small shallow nozzle which is slightly up turned at the tip. Large oval wick hole, filing hole is wide and circular, there is no discus. Ribbon handle around the back of the lamp, attaching to the shoulder in two places. Small, slightly uneven foot with a flat base slighitly carrinated.
|
|
| REDMG:1964.1603.1
|
Circular deep body with lower body wider than the upper. Flat , slightly concave rim to a large circular filling hole. nozzle is long and flat with small oval wick hole at the tip and a small depression at the end of the tip. Base is flat and circular, wheel or wire marks still exist on the base. Band handle is attached across the back of the lamp.
|
|
| REDMG:1964.1604.1
|
Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression.
|
|
| REDMG:1964.1624
|
Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base.
|
|
| REDMG:1964.1625
|
Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside.
|
|
| REDMG:1964.1626
|
Trefoil mouth attached at the back to a high-swung vertical handle (missing) that reattached at the bottom of the diagonal shoulder; below carination, body bulges and then tapers to a flat base, slightly concave on the underside. For tall trefoil oinochoai see Corinth 13, 131 fig. 14, 133, e.g. Corinth T1298-99: Corinth 13, 312 nos. D 49-f-g, pl. 57.
|
|
| REDMG:1964.1707.1
|
Everted thickened and rounded rim, from the back of which extends a round vertical handle that joins the body at the middle of the biconical body with a flat, rough base.
|
|