| 13.10.11.1
|
Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead.
|
|
| 13.10.11.11
|
Ovoid with a piercing through the longest axis and a ridge around the middle.
|
|
| 13.10.11.16
|
Ovoid in shape with a hole through the centre on the smallest axis and an edge around the widest part of the bead.
|
|
| 13.10.11.2
|
Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead.
|
|
| 14.9.114
|
Lower half of a figurine (joins Reading 14.9.115), preserving the legs and lower torso of a nude boy, some drapery (a cloak) behind him that is twisted around his right hand, and the rectangular base on which he stands.
|
|
| 2007.4.152
|
Base of a pot, around half of circular base remains, with stem and a small part of the bowl of the pot
|
|
| 2008.7.57
|
Triangular rim fragment with a ridge around the rim
|
|
| 23.11.31XXX
|
Female wearing a long patterned skirt. The upper, larger section of the skirt is divided into four vertical bands made up of wide plain, narrow plain, wide plain, and single-line zigzag motifs. These are terminated with two horizontal bands running around the hem.
|
|
| 26.12.29
|
Moulded rings around top of stem and outer edge of top of body. Sharp ridge at top of incurved rim.
|
|
| 34.10.12
|
Top closed, perforated with two concentric rings of holes (six inner, nine outer) around pointed knob.
|
|
| 34.10.23
|
Molded figurine (hollowed at back in a tall rectangle) depicting Leda with the swan. Leda stands with her right foot upraised (on a rick?), and holds in her upraised left arm a himation, which wraps around her back and swirls onto the top of her right leg, to cover her pudenda, right leg, and run down the interior of her left leg. She holds the swan firmly with her right hand, so that it is tucked under her right arm.
|
|
| 39.1.1
|
Vertical ring handles, spurred, start directly from rim and finish at the moulded rim around the body, and tilt slightly upwards. Moulded foot, all black, conical inside with narrow, slightly concave, resting surface.
|
|
| 45.10.1
|
High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder.
|
|
| 45.6.22
|
Groove around base of knob, but knob is missing.
|
|
| 45.6.70
|
Circular shallow body with flat shoulder and a concave discus with small filling hole towards the right edge of the discus. Body shallower at the front end and the widest part of the body has a raised band around it. Short rounded nozzle and circular smoke hole. Vertical handle with a circular hole which runs down towards the base. Base demarcated but not raised and slightly off centre. There are two small shoulder lugs on opposing sides.
|
|
| 45.6.71
|
Circular body with a flat bad around the widest part. Slightly convex shoulder and a concave discus with a small irregular filling hole roughly in the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical handle extends towards base and has a small hole. Base is demarcated but not raised.
|
|
| 51.4.1
|
Fragment of the rim and neck, around the surface of the handle.
|
|
| 53.8.1
|
Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around.
|
|
| 59.6.3
|
Single but ornate handle that has pointed oval at bottom, two moulded lines towards top and a piece that curves up separate to the main handle in a 'cobra-like' strike pose. The main piece of the handle extends along rim of vessel in a leaf-like shape with notches in the edges. Mouth is wide and has small rim. Outside body is marked with 4 pairs of incised bands around its sides. Small curve at side of foot. Base is flat but has 6 incised concentric circles and a central sunken dot.
|
|
| 78.12.10
|
Circular body, flat moulded shoulder, small concave discus with a small filling in the front right hand side of the discus. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder, circular piercing through handle. Circular unmarked base, slightly concave.
|
|
| 78.12.11
|
Circular body, flat moulded shoulder, small concave discus with a small off center filling hole. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder. Circular delineated base, slightly concave.
|
|
| 78.12.5
|
Shallow circular body, slight shoulder leading to a large concave discus with a filling hole on the central axis, but further forward. Medium nozzle with concave sides leading to a rounded tip with a circular wick hole. Delineated base, slightly concave. Vertical band around the edge of the whole lamp, probably from joining.
|
|
| 79.1.14
|
large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base.
|
|
| E.23.46
|
Lightweight hair ring comprised of a circle that is incomplete, to allow hair to be put into the ring. The top and bottom slope into the central hole and the body widens so there is a ridge around centre.
|
|
| E.47.6.9
|
Undulating pie-crust mouth (probably hand molded). The body is globular and the base is rounded, with a small part flattened. The base presents the finger marks of the potter. It seems to have been suspended by a string around the neck (attached).
|
|
| E.62.8
|
Deep sided bowl with curved sides and no significant base meaning bowl is slightly unsteady. There are two incised bands on the outer surface around the rim and a more significant ridge on the inside where bronze has been folded over to make a smooth and safe edge.
|
|
| REDMG:1964.1601
|
Circular deep body with small shallow nozzle which is slightly up turned at the tip. Large oval wick hole, filing hole is wide and circular, there is no discus. Ribbon handle around the back of the lamp, attaching to the shoulder in two places. Small, slightly uneven foot with a flat base slighitly carrinated.
|
|
| REDMG:1964.1604.1
|
Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression.
|
|
| REDMG:1964.1619.1
|
Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base.
|
|