14.9.44
|
Top edge of rim is painted black. Buff clay with black paint. Outer surface has a ripple pattern based on horizontal band. Inside has similar but the ripple pattern does not extend below the rim, and sits on two bands inside bowl.
|
|
23.11.31OO
|
Profile figure facing the direction right. does not appear to be a Spartan warrior. possibly a Persian warrior or leader? face. helm and armour slightly visible though. defining feature is a ponytail at the back of his helm. not clear whether he is carrying any weaponry. representation of Persian King Darius or Xerxes from the Persian Wars? lead figures part of a large relief commemorating the war? or just used for ritual purposes with the flogging at the Temple of Artemis Orthia? pretty good condition. lead is an off-colour brown grey, similar to 23.11.31h. bears no similarity to the other lead warriors, as it is a lot thinner than them and lacks a shield.
|
|
38.4.2
|
Reddish-brown on pale buff ground. The false neck is decorated predominantly in a black band, with a narrow and broad black circular band in the centre of the false neck. The underside appears to be reserved, with a single thick black line at the base on the false neck. The true neck has a faded broad back band around and overlapping the lp. There is a broad black band at the base of the neck, and also a black blob on the side facing the false neck. On the shoulder there are six groups of narrow black lines painted horizontally. There is one group of either side of the true neck, both have eight horizontal lines, the one on the left has two rings of black to either side of it. The groups of lines on the other side, if faced with the true neck at the top, have groups of 6, 7, 9. 8 horizontal lines, all with a small ring of black in between them. The shoulder is outlined with a broad ring of black. The body has four broad black lines, which have faded to a reddish brown. Adjacent are narrow red rings; four above the first band, two within the first band, two within the second band, two or three below the second band. The fourth band does not overlap the base, which is slightly concave in shape, and has the suggestion of a foot ring.
|
|
45.10.22
|
a: The upper surface of the rim is reserved, although glazed. However, the side surfaces (internal and external) are black (apart from a reserved area that would not have been visible if the handle was not missing). The neck is also black on the inside, however, there is a perpetual motif of palmettes on the external surface. These are double palmettes (5 narrow divisions upwards and 5 similar ones downwards) that look as if chained together by a horizontal row of small rings and each such palmette is separated from the other by a vertical line with wider endings, while thin, curved lines (above and below) frame each palmette. The sides of the handle bear a black band each and there is also a thin line underneath them that contours the end of the neck. On the carination that divides the neck from the shoulder there is a thin line with added red colour. The shoulder bears a motif of tongues, divided by vertical lines, while a line underneath contours them. The motif does not appear under the surface of the handle. At some point underneath this pattern there is the beginning of another motif (black with 3 dots of added red and scale-like incisions). The interior of the rest of the vessel is reserved, since it is an amphora. b: It bears exactly the same motif as the previous neck bit. c: From the branch of a three-peaked floral motif there emerge two curved lines that are downwards and upwards, each forming an ellipsoid-shaped frame from whose lower (in the case of the curved line that goes downwards) or upper (in the case of the other line) endings form one floral motif each. The left one is a voluted palmette with 5 petal shaped divisions and the right one is a three-pointed flower, similar to the central floral motif, but bigger. Although the upper part of this pattern is not preserved apart from the starting point of the motives, it is certain that this would have been the heraldic motif depicted. Underneath this area there is a thin, black line and below that, a pattern of guilloche ( branches with tear dropped endings interwoven together) with a row of dots, framed (above and below) by two pairs of concentric lines. Towards the end of the fragment (which is also towards the end of the vessel) there is a radial-shaped motif, two lines and the rest of the surface is black. d: It is a part of the body's area that bears the guilloche pattern and the radial-shaped motif underneath, but one third of it is not preserved. e: On the left there is the upper part of probably a palmette (two endings of petal-shaped divisions). Next to that there is the depiction of a draped lower body part. The drapery is formed by the incisions on a black surface. There are diagonal incisions and wavy endings to denote the folds of an himation, as well as the lower termination of the chiton, which is suggested by two almost horizontal incisions, a wavy line and another horizontal incision. the drawing is detailed and clear. f: The part between the surface above the knees and a bit below the calf of a male figure that wears a short chiton (incised, wavy folds are visible above the knee), as well as grieves with out curving terminations (Hermes?) of added red colour, now fadded away. On his left there is the upper part of a palmette and on his left there is a diagonal line, with rows of dots on either side (characteristic of Dionysus). Very clear drawing. g: Half of the three-peaked flower, a bit of a black line and two petal-shaped motives. On the side, there is part of the dotted branch and what appears to be part of a figure's drapery (upper right body part ?), with some incisions used to render details. h: Between the lower body part of two figures there is part of the dotted branch. What is preserved from the right figure is incised lines and circles on a black surface. The left figure's drapery (peplos and himation ?) is preserved (below the waist), consisting of incised diagonal and wavy lines to denote the folds. i: A central male figure's (Dionysus) body from shoulder to legs is visible and surrounded by a dotted branch. He is standing between two figures. The male figure (there is part of beard with added red) on the left holds part of the branch with his palm (upper body without the head is preserved). The only visible part of the draped figure on the right is part of the legs. Incisions are used to render details. j: Apollo playing his lyre (kithara). The head (in profile, facing right), right hand and part of the god's front side of the body is visible, as well as the largest part of the lyre. Part of a dotted branch exists in the background. Incisions have been used to render the chords of the lyre as well as for the eye, contour of hair, ear and contour of the god's body, while a taenia (fillet) on his head is in added black colour. k: Only part of a thin, black line is preserved. l: two broad black bands that overlap at some point. Incisions and the ending of a dotted branch (part of draped figure?). H & J on display in symposium
|
|
45.6.4
|
Brownish-grey in colour, apparently from burnt deposit. Shape is of a normal Corinthian kothon except that the handle is abnormally thick with no side projections. Inside, black bands in center. Turned in rim has black bands as does the top surface with four bands alternating thick and thin. Band near to foot. Base is raised and has two central circles.
|
|
73.9.3
|
Singular arm of handle remains, outside of which has a black glaze, the inside does not. Remains of rim, same colour as this handle. Dot rosette and dotted swastika below handle, tip of palmette leaf on right of handle. Two dark brown bands at bottom edge of fragment.
|
|
79.1.5
|
Single band incision along the handle, both on the top side and the underside. A band across the handle at the highest point which does not reach all the way around the handle but does have an incision along it.
|
|
REDMG:1953.25.81
|
The piece consists of half of a foot, which is broken about halfway down its length. The half remaining includes all five toes, with slightly curling little toes and a rather stumpy big toe. The foot sits upon a thick sandal. Under this is a chunk of unworked marble, presumably part of the original base of the statue, which takes up about the same amount of mass as the carved foot does. This underside is rough and worn. The break halfway through the foot in fairly clean, leaving a rough, but planar surface.
|
|
REDMG:1953.25.98
|
Small male head with curly thick hair, a large beard, and a large moustache, as well as a furrowed brow. The shape of the head suggests that it was once attatched at the back to a wall or other verticle structure, although that back of the head does have a concave structure to it. Coarse, dark red fabric.
|
|
REDMG:1964.1640.1
|
Rim of object remains, as does circular handle, placed horizontally just below rim. Traces of black glaze.
|
|
REDMG:1964.1703.1
|
Deep red colour inside and out and a black slip. Outward curving rim and a long neck. Two incised bands around shoulder. Body tapers to foot which then flares out to flat base. Object does not stand straight due to uneven base.
|
|
REDMG:1964.1719.1
|
Cylindrical shape - the lower half of an alabastron. Heavy object. Patterning appears to be naturally formed into lines, giving different colours and texture. Rounded base means the object does not stand.
|
|
TEMP.2003.7.39
|
Triangular prism, smooth on each sides. One thread hole, 0.7cm wide, 1.0 cm from top. On one side is a smaller hole that does not emerge on the other side.
|
|